Reviews Two Selected Frequency Module

QSC CP12 12-Inch Compact Powered Loudspeaker

  • 1000 Watt peak power Class-D amplifier module.
  • Easily selected contours for commonly-used applications.
  • Advanced DSP with Intrinsic correction for superior sound quality and speaker protection.
  • Directivity matched transition (DMT) for consistent frequency response across the entire coverage area.
Check Stock

PC Interface Controller

  • 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
  • Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
  • Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
  • (current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
  • When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check Stock

RF Coax to HDMI DVI Demodulator Analog TV Tuner for NTSC System

  • ... RF output only, satellite receivers or modulated CCTV security systems. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
  • Advanced RF coax TV demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920×1080 pixels..
  • Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. [Note]: This is an analog TV tuner so it can not be used for digital cable channels and can not accept antenna input..
  • Multiple tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time. Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote controller or push buttons on the front panel. Perfect for integration with existing closed-circuit TV system..
Check Stock

2 Pieces Digital FM Transmitter Module Stereo FM Transmitter DSP PLL 76.0 -108.0MHz Stereo Frequency Modulation with LCD Display Line/USB/Mic Input, DC 3.0V - 5.0V

  • Good performance: thanks to the DSP and PLL technology, these multi-functional stereo FM transmitter modules can provide you with quality stereo.
  • Practical design: the FM transmitter module has a blue backlit LCD display, allowing you to clearly see the value in a dark environment.
  • The power consumption is extremely low, and noise interference is small.
  • Suitable for: this digital FM transmitter supports line/USB/mic channel input, its transmitting frequency range is 76.0~108.0 MHz, and the frequency response range is from 50 Hz to 18 KHz.
  • Frequency adjustment stepping is 0.1 MHz/ times when short press the key and 1.0 MHz/ times for long press.
  • Wide uses: the digital FM transmitter module can be applied to FM wireless, USB PC broadcast, maternal and child monitoring, wireless microphone and much more.
  • Warm notice: please confirm whether the power polarity and power voltage are correct before turning on the power.
  • If the input voltage exceeds 5V or the positive and negative poles of the power supply are connected reversely, it may cause permanent destroy to the module.
  • Do not touch the components on the back of the module while working, so as not to affect the normal operation of the module.
Check Stock

High Voltage Pulse Generator DC 6-12V 0.5-1 Million V Super Arc Pulse Ignition Transformer Boost Step-up Coil Module for Cigarette Lighter (901-c2)

  • [High Quality] The pulse generator is made of high quality material, it has long use life, high reliability and durability..
  • [Powerful] After the input of DC 6-12V voltage, a dc high voltage of about 10,000V (about 1-2 cm of arc) can be obtained at the output end, small size and high efficiency..
  • [Feature] The boost step-up coil module can generate high temperature and high frequency arc to easily ignite combustible such as smoke, paper and candle. There are two models of pulse generator for choice, including 901-2(work continuously for 10s) and 901-c2(work continuously for 1 min)..
  • [Good Performance] According to the tesla coil principle, the module outputs high voltage pulse current, thus it will generate the electric arc between the two wires. The peripheral circuit is simple (simply connect the switch, install the battery), the discharge intensity is violent..
  • [Application] This module is mainly used for high school science experiment, electronic instrument, negative ion generator, high voltage ignition, DIY science products and more..
Check Stock

Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module

  • FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
  • FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
  • ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
  • APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
  • MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..
Check Stock

CDM324 Microwave Module, 24GHz 15m Doppler Radar Smart Microwave Body Induction Module Single Channel Switch Intelligent Sensor Module

  • 【Contactless】 Non-contact detection, moving object detecting. Using Doppler radar technology, Compared with the traditional infrared feeling PIR, with the penetrating detection capability..
  • 【Wide application】 This frequency sensors module's transmitting frequency is 24GHZ, can be widely applied in business, industries, word controlling etc.This is a microwave sensor module for detecting moving objects and human body. Widely used in human body sensing lighting system, anti-theft alarm system..
  • 【Parameter】 Advanced low consumption PHEMT oscillator, Provide various frequency range standards: -UK,-F,Operating Temperature:-20~60℃..
  • 【Independence】Independent transmitting and receiving route, can get the big gain. The module has many advantages such as high sensitivity, long sensing distance, wide sensing angle, high reliability, wide range of operating voltage..
  • 【High performance】 Single channel operation. High sensibility, high flexibility, low cost, operating distance is 15m. Not influenced by temperature, humidity, noise, air flow, dust, ray etc, adaptive to terr....
Check Stock

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock

AllAboutAdapters RF Coax to HDMI VGA Component YPbPr Video Demodulator TV Tuner for NTSC System

  • Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Backward compatible with all DVI equipments via using HDMI to DVI adapter..
  • Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details..
  • Multiple of these RF demodulator/tuner units can work together with video wall system or split-screen video processor to form a large-scale display system or display multiple TV channels on one screen at the same time Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote controller or push buttons on the front p....
Check Stock

AOICRIE 3Pcs DC to DC Voltage Regulator Step Down Power Supply Buck Converter Module 6-40V to 5V 3A Dual USB Port Output

  • DC-DC 9V/12V/24V/36V to 5V 3A step down power converter module..
  • Converting Efficiency: 92% (MAX), Switching frequency: 150KHZ, Input: 6V-40V, Output: 5V / 3A (MAX)..
  • This module has short circuit protection, Working temperature: -40 to +85 degree Centigrade..
  • Load capacity: Maximum output 3A (with two phones simultaneously) Conversion efficiency: 92%..
  • On-baord Dual USB port with 5V 3A fixed output,can be used as a USB charger for your power bank,smart phones,tablet,etc.DIY Mobile Power Supply,5V output for charging Phone,MP3, MP4, etc..
Check Stock