Reviews Twist And Lock Fitting

Grinder Wrench Adjustable Pin Spanner Wrench Angle Grinder Lock-Nut Wrench For Grinders

  • ★Pin Spanner Wrench Main Using:The adjustable pin wrench is for use with locknuts on angle grinders when fitting or removing abrasive discs.
  • ★Pin Wrench Fit Modle:Suits most grinders and Lock nuts. Ideal Replacement Pin Wrench For All Angle Grinders, Bench Grinders, Circular Saws, and Mitre Saws etc.
  • ★Pin Spanner Wrench Design: Pin Wrench Easy twist knob adjustment,Adjustable Extent:10-30mm.Heat treated pins for long lasting and strong grip and rubber dipped handle grip for comfort.
  • ★Note:Please allow 1-3 cm difference due to manual measurement.
Check Stock

Toolwiz 2pcs Air Chuck 1/4 Inch Brass Open Flow Lock On Tire Inflator Chuck Tyre Valve Inflator Hose Adapter Tire Chucks Air Compressor Hose End with Barb Connector for Hose Repair

  • PREMIUM QUALITY- Toolwiz air chunk tire inflator is made of 100% solid brass and chrome plating for higher durability and resistance to corrosion. Well-engineered with clean smooth surface.
  • UNIVERSAL FITMENT- Maximum pressure rating of 150 psi, barbed fitting for 1/4" ID air lines. This tire inflator chuck is compatible with 6mm bore hose, suitable for vehicle tire inflator, such as car, vans and truck, etc..
  • PRECISE DESIGN- The spring is easy to depress and strong enough to stay in place while the air chuck ends will lock-on open flow clamps which make it easy for tire inflation.
  • EASY TO USE- Quick connect air chuck is easy to us by simply press down the lock clip, push or twist the air chuck into the valve stem until it is clamped, release the lock clip.
  • WARRANTY- Buy with confidence, 100% satisfaction guarantee. 1-year warranty.
Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
  • {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

Globe-Weis/Pendaflex Globe Weis 19-Pocket File Express Case 11170 Colors May Vary ,Assorted Colors

  • Sturdy legal sized case file with 19 pockets.
  • keep important information secure, organized and close at hand.
  • Features 1/3 cut reinforced straight line tabs with A-Z printing on left side and Subject printing on the right side.
  • Durable construction with mylar reinforced kraft gussets and secure twist lock closure secure twist lock closure.
  • Carrying handle, Twist-lock closure, Kraft color indexes and gussets, Assorted colors available.
Check Stock

Hornady Lock-N-Load Die Bushings, 10 Pack – Change Dies Quickly with a Simple Twist – Compatible with All Reloading Presses - Item No. 044096

  • Hornady Lock-N-Load Die Bushings – The Lock-N-Load bushing system will forever change the way you switch from one caliber to another. Lock-N-Load technology allows you to change dies and start loading another caliber in a matter of seconds. Includes 10 die bushings.
  • Maximize Reloading Time – Quickly and easily change from one die to another with a simple twist.
  • Positive Locking Action – Holds the dies in perfect alignment. Compatible with all Hornady Reloading Presses.
  • The Easy Way – Get the most out of your reloading press. Change the caliber by a simple twist of the die counterclockwise.
  • How to Use – Thread your die (7/8"-14 thread) into the Lock-N-Load Die Bushing and insert the assembly into the press bushing. Twist it clockwise to lock it in to position, then adjust your die as usual and tighten the lock ring.
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Draft Brewer New 5 Gallon Stainless Steel Ball Lock Keg

  • 【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!.
  • 【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!.
  • 【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!.
  • 【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!.
  • 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock

ARMADILLO DEFENSE Pepper Spray and Personal Alarm with a Case ― Key Chain Bundle (2 Pack) for Protection and Self Defense, Safeguard for Women and Men, Tear Gas and Panic Button

  • BE SAFE, NOT SORRY | Protect yourself and your family. This self protection bundle is ideal for all ages. Arm yourself with the essential tools to take control over your environment and feel safe wherever you go..
  • PERSONAL ALARM KEYCHAIN COMMANDS ATTENTION | With the press of a button, the 130dB alarm alerts others that you need help. It features an LED light to illuminate your path and provide quick access to a door lock so you’re not fumbling with your keys..
  • 10 FOOT RANGE | This 3-in-1. A trigger twist lock prevents accidental spraying..
  • LIGHTWEIGHT & COMPACT | These self defense keychains are compact, fitting into the smallest pocket or purse. They can be hand held or clipped on a belt loop or the outside of a backpack..
  • WHAT’S INCLUDED | 2-Pack (1 Personal Alarm, 1) or 4-Pack (2 Personal Alarms). Alarm comes with alkaline batteries and has a 1 year life span..
Check Stock