Reviews Turning lathe

Hurricane Turning Tools, HTT-102, High Speed Steel, 5/8\ Bowl Gouge (1/2\ Flute) for Woodturning

  • ✅ WOOD LATHE BOWL GOUGE Our wood lathe bowl tools have greatly simplified wood turning, This set of lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable, contains 3 separate bowl gouges, overall length is 22.5 inches each..
  • ✅ BLADE 9 inch/ 230mm, made from hardened and tempered high speed steel (HSS) that that will keep a sharpened edge about 8x longer than carbon steel and will give you years of use..
  • ✅ HANDLE 13.5 inch/ 340mm, Hard and Solid beech wood, Ergonomics design makes it more comfortable while doing turning job..
  • ✅ CONTENTS This lathe chisel set includes one piece of 1/4 inch, one piece of 3/8 inch and one piece of ½ inch bowl gauges-wood turning tool, packed in a wooden storage case..
  • ✅ SATISFACTION GUARANTEE Our number one priority is customer satisfaction! If you aren’t happy with our lathe bowl turning tools we offer a no questions asked, 100% money back guarantee..
Check Stock

RIKON Power Tools 70-105 10\ x 18\ 1/2 hp Mini Lathe

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

Grizzly Industrial G0842-14" x 37" Wood Lathe with Copy Attachment

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock

Aloris Tool AXA-1S Oversized Turning and Facing Holder

  • OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
  • Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • 【PRODUCTS INCLUDE】 - Lathe tools including(1)10.7"handle (2) 7.9"wood turning tools including square,round,diamond,square arcs(3)easy to replace the head of the T15 wrench,all parts are made of special hard sponge full fitted wrap,in the box..
  • 【5 SECONDS QUICK DISASSEMBLY】 - No tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame c....
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts & Full Size Cutters Inserts

  • ... ” can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening..
  • ▶▶▶ HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools).
  • ▶▶▶ SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts.
  • ▶▶▶ FAST HANDLE SWITCHING: Excellent reliable ergonomics grip makes you feel comfortable and light. Adjustable and Extendable handle support freely adjust the length according to your preference. Wood turning tools equipped with tools to adjust and extend the length, easy and flexible to assemble and disassemble....
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock