Reviews Turn Signal Switches

Eagle Lights Generation II Front LED Turn Signals with White Running Lights for Harley Davidson Motorcycles, 2-Inch Bullet Style Turn Signals

  • ...l and running light. With a bright white 6000k color temperature, they will match all of your LED products..
  • ULTRA-BRIGHT RUNNING LIGHTS - Transform your dull turn signals into super bright white running lights! Each LED is capable of illuminating white or amber. Every LED illuminates white for the running light and switches to amber when the turn signal is activated. You will be able to see farther, be seen from farther away and stay safer on the road with our Generation II LED Turn Signals. Never Go Dark with Eagle Lights..
  • PLUG N' PLAY - Easy as changing a bulb on Harleys with 2” bullet style turn signals. 10-older Softails, 11-older Dynas, 13-older Sportsters, and 13-older Touring and Tri-Glide models the turn signals may flash faster than normal. An Eagle Equalizer can be added to restore normal flash rate. 2014 and newer Harleys do not require an equalizer. 10-13 Street Glides use part # EL60WR-P-SRG. 04-13 Sportsters use part # EL60WR-P-XL. All other 96-13 Harley Davidson models use part # EL60WR-P.
  • EAGLE LIGHTS LIFETIME WARRANTY - Our turn signals are designed to outlast your bike! If something goes wrong, you are covered by our lifetime manufacturer's warranty. No hassle returns and no hassle warranty replacement..
Check Stock

Rostra 250-3032 Cruise Control Switch and Lever Assembly

  • This is only the cruise control switch, and requires the cruise control unit (sold separately) to be a complete kit.
  • Designed to replace the existing turn signal lever in the vehicle (not to be installed on a turn signal lever that has been cut off).
  • Works best with a Rostra cruise control kit, but can work with other universal cruise control systems.
  • Rostra universal cruise control kits do not come with a control switch, due to the different designs of vehicles. Thus control switches like this one.
  • select the switch that works and looks best for your vehicle and your tastes.
  • Installation difficulty level is moderate.
  • generally best done by a pro but a skilled DIY can do it.
Check Stock

ACDelco F3914 Professional Starter Solenoid

  • Work with vehicle electronics to help optimize vehicle capabilities.
  • Array of switches, including: door lock, turn signal, ignition, trunk, and windshield wiper switches for most vehicles on the road today.
  • Professional, premium aftermarket replacement.
  • Manufactured to meet expectations for fit, form, and function to provide the performance and dependability you expect from ACDelco.
  • VEHICLE FITMENT:2001 Ford Ranger V6,1983 Lincoln Town Car,1982 Mercury Cougar 2.3L 3.8L, 1982 Mercury Zephyr 2.3L, 1982 Mercury Cougar,Zephyr 3.3L, 1982 Mercury Cougar,Marquis,Zephyr, 1982 Mercury Marquis.
Check Stock

Universal Laser Rocker Switch Backlit LED SASQUATCH for Car Truck Boat ATV UTV 12V Bright Light Powersports (Orange)

  • Manual-return(latching action)ON-OFF button, can be use Compatible For general lights, hazard light, fog light, head light and power outlet Compatible For mobile devices.
  • Self-return(momentary action) button, can be use as horn, turn signal, enginee power, start kill switches..
  • Waterproof design, suitable Compatible For rainy day.
Check Stock

X AUTOHAUX Turn Signal Switch Windshield Wiper Multifunction Combination Switch Y85Z13K359CA for Ford F-250 1997-1999

  • [OE Number] Y85Z13K359CA, Y85Z-13K359-CA, F65Z13K359AA, F75Z13K359BA, F85Z13K359CA, Y85Z13K359AA, YL3Z13K359CA, TSS21, SW5579.
  • [Application] Fitment:for Ford F-250 1997-1999,for Ford F-150 1997-1999,for Ford F-250 HD 1997,for Ford F-350 Super Duty 1999-2001,for Ford F-250 Super Duty 1999-2001,for Ford F-350 1997.
  • [Easy to Install] This multifunction switch is manufactured to the OE specification to provide factory fresh appearance and direct fit..
  • [Function] This turn signal switch is a direct replacement and also controls the High and Low Beam Lights, Hazard Lights, Turn Signal Lights, Wipers Switches.
  • [Durable] The turn light switch has went through rigorous testing so that you will get a fairly reliable switch to give you full control of various vehicle systems..
Check Stock

HeliBars HR01139 Handlebar Riser

  • READY TO GO: Our bars are Pre-wired with your control harnesses extensions, allowing you to use our “Prewired” bars with your existing switches and turn signals. Our bars come with the control and turn signal extensions Pre-Wired along with self-solder/heat shrink connectors. You simply cut your control and turn signal wires, strip a small portion of each, place them into our pre-soldered/heat shrink connectors and shrink them..
  • MODEL COMPATIBILITY: 2011 & Newer Sportster and Softail models (Dyna, Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob). Compatible with Harley-Davidson Sportster (2014-2021), Dyna (2012-2017) and Softail models  (2011-2021 , Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob).
  • 100% Made in the USA - Laser cut, CNC mandrel bent (no fat spotting), fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show quality finish. Pre-Wired for quick and easy installation. All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment. No slag inside the bar tubes makes installation easy..
  • DOMINATOR INDUSTRIES, A NAME YOU CAN TRUST: We proudly produce....
Check Stock

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 2 position switches to turn each light Off or On Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of da....
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case o....
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in cas....
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable....
Check Stock