Reviews Turn Plate

MOUNTAIN PLUMBING BDWUNLT22/WCP Deluxe Bath Waste and Overflow 18-Gauge Body Drain Includes Lift and Turn Trim Kit Weathered, 1 1/2\

  • Deluxe Lift and Turn Bath Waste and Overflow Kits1 1 2 Prime 18 Gauge all brass body bath waste and overflow with our Lift and Turn trim kit Available in 20 plated finishes Features Maximum make up 22 Prime Designer Face Plate Deluxe Lift and Turn Bath Waste and Overflow Kits1 1 2 Prime 18 Gauge all brass body bath waste and overflow with our Lift and Turn trim kit Available in 20 plated finishes Features Maximum make up 22 Prime Designer Face Plate.
Check Stock

TonGass 7-29/32' Pool Skimmer Vacuum Vac Plate with Gasket (Glue NOT Included) Compatible with Hayward Skimmer Basket SP1082 1084 1085 1075 PN.SP1106

  • This is a must-have for your manual vacuuming needs. This vacuum plate fits for Hayward in-ground skimmer models SP1082, SP1084, SP1085, and SP1075.
  • 7 29/32” DIAMETER SKIMMER VACUUM PLATE WITH 1 1/2” STRAIGHT ADAPTER - fit 7-inch skimmer baskets. They’re both equipped with a 1 1/2 inches straight vacuum hose connector that works best for in-ground pool skimmers.
  • With rubber gasket - permanently affixed on the bottom of the vacuum plate ensures a perfect vacuum seal between the skimmer surface and the vacuum plate.
  • NO NEED TO TURN THE PUMP ON AND OFF - The function of a skimmer vacuum plate is straightforward enough. It removes the need to connect the vacuum hose directly to the inlet, a common practice that can cause the skimmer to clog with large debris.
  • With the vacuum plate, you’ll be vacuuming from the skimmer basket instead of the pump’s strainer basket. There’s no risk of clogs and you don’t need to turn the pump off to install the vacuum hose.
Check Stock

-35º [Explicit]

  • 2PCS 50W 6ohm Load Resistors + 4PCS Quick wire Clip..
  • Prevent LED Turn Signal Lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard..
  • NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic..
  • One resistor is required for each turn signal bulb or each license plate light bulb..
  • Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary..
Check Stock

MOUNTAIN PLUMBING BDWUNLT45/PEW Deluxe Bath Waste and Overflow 18-Gauge Body Drain Includes Lift and Turn Trim Kit Pewter, 1 1/2\

  • Deluxe Lift and Turn Bath Waste and Overflow Kits1 1 2 Prime 18 Gauge all brass body bath waste and overflow with our Lift and Turn trim kit Available in 20 plated finishes Features Maximum make up 22 Prime x 24 Prime Designer Face Plate Deluxe Lift and Turn Bath Waste and Overflow Kits1 1 2 Prime 18 Gauge all brass body bath waste and overflow with our Lift and Turn trim kit Available in 20 plated finishes Features Maximum make up 22 Prime x 24 Prime Designer Face Plate.
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

Grom Fender Eliminator (2016-2020) - New Rage Cycles

  • New Rage Cycles hits the market with a custom designed fender eliminator kit..
  • This kit completely cleans up the back of your bike with the brightest signals and brake light on the market! The license plate bracket is constructed from billet aluminum and black powder coated, and tucks up underneath your tail, providing a very clean.
  • This plug-and-play kit saves you time and money on installation, and lets you plug right in and ride on! LED license plate light provides you with everything you need for a very clean fender eliminator kit..
  • The turn signal lenses are CNC-machined from polycarbonate and the turn signal bracket is machined from billet aluminum..
  • New Rage Cycles uses extremely bright 1 mm LEDs, giving you outstanding turn signals...day or night! Hardware is provided with your kit should you want to mount the passenger pegs (where required)..
Check Stock

Suzuki GSXR600/750 Tail Tidy (2011-Present) - New Rage Cycles (Tucked)

  • New Rage Cycles hits the market with a custom designed fender eliminator kit..
  • This kit completely cleans up the back of your bike with the brightest signals and brake light on the market! The license plate bracket is constructed from billet aluminum and black powder coated, and tucks up underneath your tail, providing a very clean.
  • This plug-and-play kit saves you time and money on installation, and lets you plug right in and ride on! LED license plate light provides you with everything you need for a very clean fender eliminator kit..
  • The turn signal lenses are CNC-machined from polycarbonate and the turn signal bracket is machined from billet aluminum..
  • New Rage Cycles uses extremely bright 1 mm LEDs, giving you outstanding turn signals...day or night! Hardware is provided with your kit should you want to mount the passenger pegs (where required)..
Check Stock

SuperATV Universal Street Legal Lighted License Plate Holder for UTV / ATV | HDPE Construction | 3.8 W Mini Incandescent Bulb

  • ✔️【Fits】Universal to fit any UTV or ATV | Works best with SuperATV Turn Signal Kits.
  • 【Make Your UTV/ATV Street Legal】Get your UTV/ATV street legal with a Universal Lighted License Plate Holder from SuperATV. The sturdy HDPE construction and simple wiring makes it easy to install. The light is protected by an aluminum hood that directs light directly onto the license plate..
  • 【Design】It’s designed to work in conjunction with SuperATV Turn Signal Kit by connecting directly to the wiring harness, but it can be wired to any UTV or ATV. Uses 3.8 W mini incandescent bulb..
Check Stock

Kawasaki Ninja 400 Fender Eliminator - New Rage Cycles

  • Fender eliminator kit cleans up the rear of your bike with a creative design and all the hookups to keep it street safe.
  • Complete with LED turn signals, brakes lights, license plate bracket, and LED license plate light for a full LED replacement.
  • Constructed from black powder-coated aluminum for durable reliability with a sleek, clean look.
  • Turn signal lenses are CNC-machined from polycarbonate with extremely bright LED bulbs for crystal clear light.
  • Plug-and-play kit saves you time and effort, provide all the necessary hardware and OEM connectors for a simple installation.
Check Stock

Kitchen Basics 3-In-1 Meat Grinder and Vegetable Grinder/Mincer, 3 Size Sausage Stuffer, Pasta Maker (White) by F&W

  • Quickly & easily grind meat, vegetables, beans or garlic.
  • just turn the hand crank / Comes with two stainless steel screens.
  • fine mincing plate and coarse mincing plate / Can also be used to finely mince or purée vegetables for baby food / free bowl included.
  • Attach the sausage funnel (3 sizes included) and impress your guests & family to healthy and delicious homemade sausages..
  • Make your own homemade paste – Creates two pasta types.
  • rigatoni and spaghetti. Just insert the dough.
  • turn the crank and watch it turn into beautiful homemade pasta strands..
  • Dimensions: 7.5” Height x 5” Width / Quality sharp stainless steel blades.
Check Stock