Reviews Tungsten Steel Boring Bars

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.

High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
Fine workmanship, compact and lightweight lathes tools, easy to operate..

High-Quality Materials: Made of durable high-quality alloy steel materials with hardened and sharp carbide blades for effective processing..
Durability and Sharpness: Tungsten carbide blades are tinned to provide long life and sharpness, and have a higher temperature than ordinary steel tools. The turning tool holder is made of high-quality steel and plated with nickel, which has durability, moisture resistance, rust resistance and corrosion resistance..
Excellent Cutting Performance: Each tool holder has a cemented carbide insert with a positive cutting angle and a built-in chip breaker, which is very suitable for general cutting operations..
Usage Scenarios: It is used for turning inner holes, reaming, boring, etc. Used for semi-finishing machining on the basis of existing holes on boring machines or lathes..
Product Packaging: Including Shank Lathe Drill Bar Turning Tool model S12M-SCLCR06 / SER1212H16 / SCL1212H06 / MGEHR1212-2 / SNR0012M11 / SDNCN1212H07 / SDJCR1212H07.

RIVET LONGER: tungsten rivet block absorbs more vibration than steel, reducing fatigue from bucking rivets.
ERGONOMIC: save your hands! Tungsten reduces wrist strain and helps prevent long term health issues.
COMPACT: fits into smaller spaces than a steel bar, easily working with those hard-to-reach rivets.
QUALITY: these long-lasting rust-resistant bars result in less kickback leading to a cleaner, higher quality rivet.
UNITED STATES based manufacturing & customer service staff are here to help you.

This tool set is made of high quality material, good wear resistance, and durable in use.
The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
This tool set contains boring head,Boring Bars, perfect for the milling machine.

...R06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display settings, p....

【High Quality】: The router bits set is made of high quality alloy steel, with strong surface coating treatment on the surface, which is tough and durable..
【Widely Used】: This router bit suitable for many wooden boards, such as hardwood, softwood, solid wood, plywood, particle board, MDF, etc. It can be used for wood trimming, boring and tenoning, punching and carving..
【Multi Types】: Router bit kit contains a variety of different type of router bits to meet your cutting needs.These Router Bits designed with 1/4" round shank,It has tungsten carbide cutting edge, which ensures sharp and precise cutting milling work..
【Easy to Store】: The tungsten carbide router bit come with a sturdy aluminum outer box, it can perfectly store the products, effectively protect the internal products, and is also easy to carry, which is more convenient for your work..
【Service & Guarantee】: If you are not satisfied with wood router bits for any reason, please contact us directly, we will help and provide replacement or refund..

♥Package includes ：1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench.
♥3pcs Thredaing boring bars : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
♥3pcs 11IR A60 boring inserts : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm. Inserts are made of carbide and the coating material is TiN ,it Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
♥Package: The carbide inserts and turning tools holder are packed in plastic containers, safe and easy to store ..
♥ If you need more 11IR A60, please search ASIN：B09496NZ3R.