Reviews Tungsten Filament

(Pack of 12) Clear Candelabra Base (E12) Flame Tip 120V Decorative Dimmable Chandelier Lights Bulbs (60)

  • This Pack Of 12 Incandescent Decorative Chandelier light bulbs are 60 watts with a flame shaped bent tip and crystal-clear finish. The average rated lifetime is 1500 hours. They produce around 650 lumens, have a candelabra (E12) base (Which is 12mm in diameter) and will work with a dimmer. They are ideally used in Chandeliers, ceiling fixtures, portables, vanities, and sconces, as well as other household lighting fixtures or fans..
  • The basic design of the incandescent lamp has not changed much since the late 1800s, when Thomas Alva Edison successfully produced the first operational electric light bulb. The filament inside an incandescent lamp must be protected so that oxygen does not reach it and cause it to evaporate on contact. Most incandescent lamps are either vacuum-sealed or gas-filled..
  • Incandescent lamp filaments are made of tungsten. Tungsten is a metal that can operate at very high temperatures without evaporating too quickly and resulting in early lamp failure. Incandescent filaments only convert about 10-Percent of the energy used into visible light, so it is necessary to use a material that can withstand extremely high temperatures. Most lamps use a coiled filament design, which has been found to be stronger and deliver better performance.
Check Stock

VILAWLENCE Hanging Light 2PCS Solar Lamp Outdoor Path Light, Lawn Garden Light Metal Waterproof Led Garden Lights,Edison Bulb Decorative for Patio,Yard,Porch (Copper)

  • 【Product introduction】：Retro solar lamp, the battery automatically collects solar energy during the day and converts it into electricity to charge the built-in battery. This lantern lights up automatically at night, which is environmentally friendly and energy saving..
  • 【Retro solar lamp】：in the daytime battery collection of solar energy, at night and night automatically lit, can be used in the garden, environmental protection, energy saving and beautiful..
  • 【Multi-scene use】：Garden decoration, outdoor garden decorative lights, night corridors are very suitable and beautiful, set off with the beauty of the night.
  • 【Appearance description】：the outer shell of the lamp is painted iron shell, not easy to rust, long service life.
  • LED tungsten filament lamp, tungsten filament bulb, high transparency and high temperature durable. The color is bronze.
  • 【Intelligent light control】：absorb sunlight to charge during the day, and automatically light up at night. It needs to be in the same amount of state (i.e. mode (ON) on) to absorb sunlight.
Check Stock

JIAWANSHUN Heat Lamp Bulb for Food Service 250W Heat Lamp Light Bulbs Infrared Heat Bulb for Food Heat Lamp 110V

  • The filament adopts anti-oxidation double helix tungsten filament which is dense, thicker and more durable..
  • Copper nickel-plated lamp holder, full welding, rust-proof, high temperature resistance..
  • Energy saving and electricity saving, high safety..
  • Good light transmittance, improved heat conversion and fast heating speed..
  • The bulb is thicker, has been tested for waterproof..
Check Stock

ERYONE Filament PLA 1.75 mm, Special 3D Printing PLA Filament 1.75 mm for 3D Printers and 3D Pens,+/-0.03mm 1kg (2.2lbs)/Spool,Marble

  • 003cul003e 003cli003e【High Quality PLA Filaments】Special 1.75mm PLA filament is mainly made of PLA raw material and adding a certain proportion of special materials.8 Colors for you to choose from:glow green, marble, dark wood,light wood, metallic iron,metallic copper,metallic stainless steel and metallic tungsten.Perfect for anyone who needs to print special effects!003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【High Accuracy】1.75mm Filament diameter tolerance +/- 0.03 mm, ensuring easy feeding of PLA Filament for excellent surface quality and high precision in every print.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【Strong Layer Adhesion】Special PLA 3D filaments has the characteristics of good ductility, strong toughness,no clogging,no warping,no bubbles,stable continuous feeding,no clogging of nozzles or extruders.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【Sealed Packaging】The filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign matter.perfect winded filament pla,100% Tangle-Free before Unopened, no stringing and warping.003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e【High Compatibility】Compatible with 99% FDM 3D printers and 3D pens that use 1.75MM filament.Made from starch r....
Check Stock

PEAK Power Vision Automotive High Performance H7 55W Headlights (2 Pack)

  • IMPROVES ROAD SAFETY: Our high performance headlights provide bright down road and side road vision for your vehicle.
  • HIGH-OUTPUT DESIGN: Mixed halogen cycle gases and precision-coiled filament produce a high output energy light pattern for improved visibility and light range.
  • HIGH-QUALITY REPLACEMENT HEADLIGHTS: Tungsten filament helps to provide a brighter replacement light than your factory headlights.
  • H7 COMPATIBLE: Compatible with all vehicles and headlamp configurations that accept H7 bulbs, providing an easy and direct fit for several cars, trucks, vans, and SUVs.
  • AVAILABLE IN TWO ADDITIONAL PREMIUM LEVELS: PEAK LIGHTING is available in POWER VISION SILVER and GOLD for increased visibility.
Check Stock

PEAK Power Vision Automotive High Performance H1 55W Headlights (2 Pack)

  • IMPROVES ROAD SAFETY: Our high performance headlights provide bright down road and side road vision for your vehicle.
  • HIGH-OUTPUT DESIGN: Mixed halogen cycle gases and precision-coiled filament produce a high output energy light pattern for improved visibility and light range.
  • HIGH-QUALITY REPLACEMENT HEADLIGHTS: Tungsten filament helps to provide a brighter replacement light than your factory headlights.
  • H1 COMPATIBLE: Compatible with all vehicles and headlamp configurations that accept H1 bulbs, providing an easy and direct fit for several cars, trucks, vans, and SUVs.
  • AVAILABLE IN TWO ADDITIONAL PREMIUM LEVELS: PEAK LIGHTING is available in POWER VISION SILVER and GOLD for increased visibility.
Check Stock

HERO-LED G14-DS-2W-WW27 Dimmable G14 E12 2W Candelabra Style LED Vintage Antique Filament Bulb, 25W Equivalent, Warm White 2700K, 4-Pack

  • 4 Pcs G14 2W E12 Candelabra Base LED Vintage Antique Filament Bulbs.
  • 2W Consumption 25 Watt Squirrel Cage Nostalgic Tungsten Filament Replacement Incandescent Bulbs.
  • For Use in Bistro Lights, Large Tents, Decorative Wedding Lights, Decorative Light Strands, Commercial Light Strings, Chandeliers and Ornamental Fixtures.
  • 120V Antique Nostalgic Decorative Incandescent Replacement Bulbs.
Check Stock

Creality 8 PCS 3D Printer Hardened Steel MK8 Nozzles Upgraded Tungsten All Metal Extruder Nozzles 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • [Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle.....
  • [Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high....
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item....
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten....
  • [Parts Included] - Coming with 8 pieces of black different size MK8 nozzles, the size is 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm, sufficient quantity and size....
Check Stock

HERO-LED G16-DS-4W-WW27 Dimmable G14/G16 E26/E27 4W Edison Style LED Vintage Antique Filament Bulb, 40W Equivalent, Warm White 2700K, 4-Pack

  • 4 Pcs G14/G16 4W E26/E27 Edison Style LED Vintage Antique Filament Bulbs.
  • 4W Consumption 40 Watt Squirrel Cage Nostalgic Tungsten Filament Replacement Incandescent Bulbs.
  • For Use in Bistro Lights, Large Tents, Decorative Wedding Lights, Decorative Light Strands, Commercial Light Strings, Chandeliers and Ornamental Fixtures.
  • 120V Antique Nostalgic Decorative Incandescent Replacement Bulbs.
  • Dimmable, warm white 2200k. These bulbs are UL listed..
Check Stock

LEOOLS 8.9 inch E26 Tubular Vintage LED Edison Bulbs,6W,Equivalent 60W-75 Watt,8.9in(225mm) Long Tube,Dimmable,800Lumens,Cool White 4000K,T10 Antique LED Filament Bulbs,Clear Glass, Pack of 4

  • Application - 8.9 inch Long Tungsten Filament Aesthetic, Daylight White 4000K, 800 Lumens, 4000K Is More Closer To Daylight, Prodce Natural And Neat Atmosphere..Suitable for Metal Wire Cylinder Cage for Pendant Style Lamps, Black pendant lighting,wall sconces, indoor or outdoor home or commercial decoration, kitchen, living room, bedroom, bar, coffee shop, restaurant, etc..
  • Unique bulbs - special square tube design to better accent your beloved lamps.Classical Edison style E26 base led light bulb,Long tungsten led filament aesthetic, with overload protection, short circuit protection and over temperature protection..
  • Advanced Dimming Pattern - E26 tubular bulb is smooth dimming 0%-100%,no-flicker or strobe,no humming or buzzing.Not all dimmers are designed to work with dimmable LED light bulbs,To achieve ideal and smooth dimming effects, we recommend dimmers..
  • Energy saving - Save up to 90% electricity bill by replacing 75W incandescent bulb with just 6W! Rated for an astonishing 30,000 hours of use - over 20 years on an average use of 3 hrs/day! No more constant LED bulb replacement..
  • Lifespan and warranty - E26 bulb is up to 25000h life span and two years guarantee,No longer to get your ladder out and chang the burnt-out in darkness frequently.
Check Stock