Reviews Tungsten Carbide Saw Tip

Turbo Flex 360 Instant Hands Free Faucet Swivel Spray Sink Hose - As Seen on TV

  • Set of 3 OFFICIAL AUTHENTIC ROTORAZER PLATINUM blades (Tungsten, Steel and Diamond Cut) designed for the Rotorazer Platinum Saw, a multi-use all....
  • 7 DIFFERENT SAWS IN ONE. Rotorazer is a combination of a Jigsaw, Circular, Hand, Band, Tile, Hacksaw, & Miter Saw..
  • 1 Diamond Cutting blade best for cutting tile and stone, 1 Tungsten carbide blade with 18 teeth best for cutting wood and laminate, & 1 High-Speed....
  • Circular Saw Kit comes with multiple multi saw blades (Tungsten Carbide, Diamond, Steel), Dust Collector, Saw Case. 85MM blades (vs 54.8MM original....
  • EASILY CUTS IN ANY DIRECTION - horizontally, vertically, straight lines, curved lines, corners, & even upside down..
Check Stock

NEPAK 4 Pack Tungsten Carbide Scriber with Magnet,with Extra 4 Replacement Marking Tip,Etching Engraving Pen for Glass/Ceramics/Metal Sheet

  • ▶Replaceable:4 Pack Tungsten Carbide Tip Scriber with 4 free replacements marking tip..
  • ▶Durable Material: The glass scriber has a durable tungsten carbide tip and an aluminum body, so it can easily handle hard materials including hardened steel, stainless steel, ceramic and glass. Disposable briquetting tungsten carbide blades are more durable than others and are not easy to drop..
  • ▶Magnetic: The permanent magnets on this etching tool pick up small parts and recover steel filings from hard-to-reach places..
  • ▶Comfortable Use: Convenient pen design and convenient pocket clip, knurled aluminum handle provides maximum control and comfort..
  • ▶Easy to Store: When not in use, the tip of tungsten carbide can be reversed..
Check Stock

COMOWARE Circular Miter Saw Blade- 10 inch 80 Tooth, ATB Premium Tip, Anti-Vibration, 5/8 inch Arbor Light Contractor and DIY General Purpose Finishing for Wood,  Laminate, Plywood & Hardwoods

  • UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. General purpose finishing and the 80 teeth tip is made of VC1 tungsten carbide which adds the saw blade's sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation..
  • HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness..
  • WIDELY USE: The 10" saw blade has a 5/8" diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use..
  • EXCELLENT ATB STYLE: The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time..
  • USE GUIDE: The equipment should be equipped with the safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust..
Check Stock

COMOWARE Circular Saw Blades 7 1/4 inch - 40 Tooth ATB, Premium Tip, Anti-Vibration with 5/8 inch Arbor Light Contractor and DIY General Purpose for Wood, Laminate, Veneered Plywood & Hardwoods

  • UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. The 40 teeth tip is made of VC1 tungsten carbide which adds the saw blade's sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation..
  • HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness..
  • WIDELY USE: The 7-1/4" saw blade has a 5/8" diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use..
  • Excellent ATB Style: The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time..
  • USE GUIDE: The equipment should be equipped with safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Hole Saw for Cutting Stainless Steel Plate, Iron, Steel

  • ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance..
  • ⭐【Dimension】Cutting Dia: 38mm/ 1.5".
  • ⭐【Ideal Design】Split tip pilot drill prevents damage by gradually guiding cutter to material..
  • ⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit.
  • ⭐【Applicable Material】You can easily to drill on the stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling..
Check Stock

Rocaris 10 Pcs Hole Saw Kit for Hard Metal 16-53mm, Tungsten Carbide Tipped Carbide Hole Saw Set with Titanium-Plated Pilot Drills for Stainless Steel, Metal, Iron, Wood, Plastic

  • 【Top Quality】 Made of high quality Tungsten Carbide Tipped Carbide, High-grade Titanium-plated cemented carbide Tooth are sharp, anti-rust and sturdy..
  • 【Innovative Three-blade Design】 Designed as Three-blade, The Carbide Hole Saw Kit‘s teeth is sharper and more efficient, ideal for cutting hard metals..
  • 【Chip Hole design】 Design chip hole to Prevent clogging, the Hole Saw Kit for Metal improve hole-opening efficiency without blocking..
  • 【Multipurpose Tools】The Metal Hole Saw Kit can be applied to electric drills, bench drills and hand drills.Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
  • 【Great variety】Include 10Pcs Tungsten Carbide Tipped Hole Saw Set with 1Pcs hex wrenches(Size:16, 18, 20, 22, 25, 30, 35, 45, 50, 53mm). To prevent rust, each drill bit must be oiled. All drills are packed in an exquisite aluminum box, which would be a excellent present for you, your family and friernd..
  • 【Tips】For your safty, please make sure you wear SAFETY equipment such as a face shield (or Full Coverage Goggles) and gloves..
Check Stock

DEWALT 12-Inch Miter Saw Blade, Crosscutting, Tungsten Carbide, 80-Tooth, 2-Pack (DW3128P5)

  • ACCURATE CUTS: DEWALT DW3128P5 80-Tooth 12 Inches Crosscutting Tungsten Carbide Miter Saw Blade 2 Pack, helps you make quick, smooth, and accurate cuts.
  • TUNGSTEN CARBIDE: Tougher tungsten carbide stays sharper longer.
  • THIN KERF: Thin kerf for fast and smooth cutting action.
  • BLADE VERSATILITY: 1 blade with 80 teeth and 1 with 32 teeth for added versatility.
  • REDUCED VIBRATION: Includes carrying bag for easy portability and storage.
  • WARRANTY: Backed by a 3-year limited warranty.
Check Stock