Reviews Tuner Wheels

DPAccessories 23 Black 1/2-20 Closed End Spline Tuner Lug Nuts for Aftermarket Wheels D5242P-2308/23

  • FOR AFTERMARKET WHEELS ONLY: These lug nuts intended for installation on aftermarket wheels requiring a small diameter lug nut..
  • WILL NOT FIT FACTORY WHEELS: These parts not intended to replace factory lug nuts on factory wheels..
  • SPECS: 1/2-20 thread - Closed End Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 1.35 in. long - 0.8 in. wide.
  • REQUIRES: 3/4 in. and 13/16 in. hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set..
  • INCLUDES: 23 Black Closed End Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

McGard 25116 Black (M14 x 1.5 Thread Size) Tuner Style Cone Seat Wheel Lock Set of 4

  • Tuner Cone Seat wheel locks are a no-compromise design engineered to fit into close tolerance lug hole recesses in Tuner style wheels. Weight matched to our SplineDrive lug nuts. For alloy wheels only. Set Includes Tuner wheel locks and 1 Unique key.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that tuner wheel locks are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your tuner wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock....
Check Stock

DPAccessories D5246P-2308/24 24 Black 12x1.5 Closed End Spline Tuner Lug Nuts for Aftermarket Wheels

  • DO THEY FIT? Verify fitment with your vehicle by using the compatibility tool on this page before making your purchase..
  • FOR AFTERMARKET WHEELS ONLY: These lug nuts intended for installation on aftermarket wheels requiring a small diameter lug nut. These parts not intended to replace factory lug nuts on factory wheels..
  • SPECS: M12x1.50 thread - Closed End Spline Tuner Style Lug Nut - Conical 60 Degree Seat - 34.29mm long - 20.32mm wide.
  • REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set..
  • INCLUDES: 24 Black Closed End Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

DPAccessories LCE3L6HCSCH04020 20 Chrome 12x1.5 Closed End ET Spline Tuner Lug Nuts for Aftermarket Wheels Wheel Lug Nut

  • BEFORE YOU BUY: Extended Thread (ET) lug nuts are a special style lug nut intended for installation on aftermarket wheels only. They WILL NOT fit on factory OEM wheels. Verify fitment with our team before making your purchase..
  • WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer. Not to be used with most wheel spacers..
  • SPECS: M12x1.50 thread – Closed End ET Spline Tuner Style Lug Nuts – Conical 60 Degree Seat – 39.88mm long – 20.07mm wide – 7.62mm shank length – 15.75mm shank width.
  • REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set..
  • INCLUDES: 20 Chrome Closed End ET Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

White Knight 2807-4 Chrome M12 x 1.50 Tuner Acorn Lug Nut with Key 4 Pack

  • Includes: 4 Chrome M12 x 1.50 Tuner Acorn Lug Nuts and 1 Tuner Socket Adapter.
  • Specifications: M12 x 1.50 Thread Pitch, 1.26” Overall Height, 0.75” Diameter, 60-Degree Conical Seat, Slim Tuner-style body to fit wheels with....
  • Cold-forged and heat-treated to OEM standards, solid one-piece construction offers substantial durability and strength. Triple-layered Chrome plating....
  • Tuner Socket Adapter features solid steel alloy construction, compatible with 3/4" and 13/16” hex. Provides safe and easy installation from home..
  • ATTENTION: Do NOT use impact drill/gun for installation. Please check your vehicle fitment before purchasing! Contact us for replacements or fitment....
Check Stock

DPAccessories LCE3L6HESBK04024 24 Black 12x1.5 Closed End ET Spline Tuner Lug Nuts for Aftermarket Wheels

  • Extended Thread (ET) lug nuts are designed to help center lug-centric aftermarket wheels on the vehicle's wheel studs. Our ET lug nuts fit most lug-centric aftermarket wheels with a 16mm diameter lug hole and a conical lug nut seat..
  • ET lug nuts are NOT compatible with factory original OEM wheels. ET lug nuts do NOT provide additional thread engagement on your wheel studs. Applications that need more thread engagement may require extended length wheel studs to be installed..
  • SPECS: M12x1.50 thread - Closed End ET Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 39.88mm long - 20.07mm wide - 7.62mm shank length - 15.75mm shank width.
  • REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part #D5210K for installation and removal. One (1) tool included. Wheels are required to be lug-centric with a 16mm diameter lug hole..
  • INCLUDES: 24 Black Closed End ET Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

DPAccessories LCS3A6HC2CH04020 20 Chrome 12x1.5 Closed End Spline Tuner Lug Nuts for Aftermarket Wheels Wheel Lug Nut

  • DO THEY FIT? Verify fitment with your vehicle by using the compatibility tool on this page before making your purchase..
  • FOR AFTERMARKET WHEELS ONLY: These lug nuts intended for installation on aftermarket wheels requiring a small diameter lug nut. These parts not intended to replace factory lug nuts on factory wheels..
  • SPECS: M12x1.50 thread – Closed End Spline Tuner Style Lug Nuts – Conical 60 Degree Seat – 34.29mm long – 20.07mm wide.
  • REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set..
  • INCLUDES: 20 Chrome Closed End Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

20 Pc Alfa Romeo 4C Black Spline Tuner Lug Bolts 12x1.25 Thread Size 28mm Stock Length (No Wheel Spacers Required) + 2 Keys

  • 20 Pc 12×1.25 Black Tuner Lug Bolts. See Product Description Below For Vehicle Fitment Information.
  • Lug Bolt Specs: Tuner Spline | Qty: 20 | Seat Type: Conical | Thread Pitch: 12×1.25 | Shank Length: 28mm | Finish: Black | Grade 10.9 Steel | Corrosion/Rust Resistant.
  • Designed Specifically For Aftermarket Wheels With A Small Wheel Hole – Will Not Fit Factory Wheels.
  • These Lug Bolts Are Manufactured With The Highest Quality To Meet Or Exceed Factory Standards.
  • 2 Keys Included. Other Sizes And Thread Pitches Available.
Check Stock

DPAccessories D5246P-2308/20 20 Black 12x1.5 Closed End Spline Tuner Lug Nuts for Aftermarket Wheels

  • DO THEY FIT? Verify fitment with your vehicle by using the compatibility tool on this page before making your purchase..
  • FOR AFTERMARKET WHEELS ONLY: These lug nuts intended for installation on aftermarket wheels requiring a small diameter lug nut. These parts not....
  • SPECS: M12x1.50 Thread - Closed End Spline Tuner Style Lug Nut - Conical 60 Degree Seat - 34.29mm long - 20.32mm wide.
  • REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set..
  • INCLUDES: 20 black closed end spline tuner lug nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

DPAccessories D5148P-2305/24 24 Black 14x1.5 Closed End Duplex XL Spline Lug Nuts for Aftermarket Wheels

  • BEFORE YOU BUY: These lug nuts WILL NOT fit on factory wheels. The vehicle compatibility tool on this listing can only match the thread size to your vehicle..
  • FITS: Aftermarket or custom wheels that require slim lug nuts for small lug holes..
  • SPECS: M14x1.50 thread - Closed End Duplex XL Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 51.31mm long - 23.11mm wide.
  • REQUIRES: 13/16 in. (21mm) and 22mm hex spline tool/key part # D5110K for installation and removal. One (1) tool included with this set..
  • INCLUDES: 24 Black Closed End Duplex XL Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock