Reviews Tubing Die Set
z-dup Repair Kit
- 37˚ DOUBLE FLARING ADAPTERS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
- 37˚ DOUBLE FLARE DIE SETS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
- 37˚ CONE constructed of high quality machined steel.
- CREATE PERFECT PRODUCTION QUALITY FLARES on annealed stainless steel tubing, terne plate steel tubing, soft aluminum and soft copper tubing.
- PRIMARY USES INCLUDE racing, restoration, hot rods, aviation.
Check StockMASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set Includes 3/8 and 1/2 Transmission Cooling Line Die and Adapter Sets with Tube Cutter Silver/Blue
- TUBE AND DIE SET STABILIZING ARM for easy tube forming.
- MAGNETIC ADAPTER HOLDER keeps adapters in place.
- EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
- CAN BE USED ON "annealed steel" & "dead soft".
- INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
- GM fuel line flare, brake lines and transmission 5/16 and 3/8".
- flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
- metric bubble flare 4. 75, 6, 8, and 10mm.
- GM transmission cooling line 3/8" and 1/2".
- mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.
Check StockABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube
- [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
- [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
- For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
- [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
- 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
- [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
- Each die block is 1.7 inches (4.3 cm) long.
- Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
- [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check StockTube Pipe Hose Bead Roller Intake Intercooler Piping Pipe Bead Roller Tool Fits Clamps 5/8″ DIY Tool and larger tubing Machine
- 【FITS MODEL】- Fits 5/8″ and larger tubing.
- 【APPLICATION PIPE SIZE】- Suitable for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm).
- 【PREMIUM QUALITY】- Manual Bead Roller made of high quality steel and aluminum material components. Direct replacement for Tubing Beader Tool, meet or exceed the OEM standard.
- 【SIMPLE OPERATION】- Just insert the end of the tubing between the dies and start turning the handle. Give the wheel a quarter rotation with each full tubing rotation gradually tightening the die against the tubing. Please note that always apply the bead before welding.
- 【12-MONTH WARRANTY】- Package include 1 x Tube Pipe Tubing Beader Tool. If you have any questions about Tubing Beader Tool, please contact us and we will reply you as soon as possible.
Check StockAmerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube
- 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
- For 3/16", 1/4", 5/16", 3/8" diameter lines..
- This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
- The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
- When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
- The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check StockAlmhs Tool Manual Mounting Mini Universal Bending Bender
- Sold By Almhs,Each Set include Special user's Guide and parts list.
- Made of hardened tool steel Mounts on a work bench or held in a vise.
- Circle Pins (3/16,1/4 & 1/2" diameter) 1 of each: Circle die ( 1" Diameter), stop pin, sharp angle.
- Makes sharp angle bends up to 5/16" diameter rod and 1 x 1/8" flat metal.
- Forms wire, flat metal and tubing into clamps, handles, brackets, hooks, coils and more.
Check StockCapri Tools 3/16 in. Double Flaring Tool (CP21110-316) & Capri Tools Tube Bender, 1/8, 3/16 and 1/4 in. (CP21105)
- Product 1: Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines.
- Product 1: Works flawlessly with 3/16 in. steel, nickel, and copper tubing.
- Product 1: Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots.
- Product 1: Detachable die lets you also use with a bench vise.
- Product 2: Easily make tight bends on round small-diameter copper, brass, and aluminum tubing.
- Product 2: Use with tubing with 1/8, 3/16, and 1/4 in. outer diameter.
- Product 2: Bend tubing from 0-120 degrees. Reference marks at 45 and 90 degrees for accurate bends.
- Product 2: Compact design lets you work easily in tight spots.
Check StockDynasty Hardware DYN-SR60-CM 1-Inch Diameter Shower Curtain Rod And Mounting Brackets 60-Inch Polished Chrome
- Set includes: shower rod, wall flange pair & mounting hardware.
- Matching wall flanges: 2-3/4" diameter concealed mounting, solid die-cast zinc alloy.
- Shower rod can be cut to length with pipe cutter or hacksaw.
- 6' long (2-piece), 1" diameter, heavy gauge tubing.
Check StockAncor 320125 Heat Shrink Step Down Butt Connector 22-18/22-14 AWG - 25 Pieces
- 4: 1 shrink ratio tubing to ensure a watertight seal between wires.
- Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp.
- Crimp indicator on barrel for proper placement of installation tool.
- Clear heat shrink tubing ensures crimp accuracy.
- Colored stripes on the barrel indicate which crimp die to use, regardless of application.
Check StockEastwood 37 Degree Flare Die Set for Professional Brake Tubing Flaring Tool
- Add These 37-Degree Flare Dies To Our Pro Brake Tubing Flaring Tool So You Can Do Even More..
- Put 37-Degree Flares On 3/16", 1/4", 5/16" And 3/8" Tubing.
- 37-Degree Flares Are Used In Many Custom, Hydraulic And Military Applications Where An- Or Jic-Type Fittings Are Used.
Check Stock