Reviews Tube Injection Machine

Denture Flexible Acrylic With Blood Streak Simulation 10 cans/bags Dental Lab Materials Flexible Partial Pink Dental Lab Equipment Tools

  • Good flexibility, sturdy and smooth, durable..
  • Good elasticity to avoid break, high translucent close to color of gums..
  • The best temperature is 287 degrees Celsius, the tube is heated for 11-15 minutes. (Note: These beads can't be boiled on stove, their melting point is 280℃, they cannot be opened manually, nor can they be melted with hot water, only professional machine can melt these beads, the name of the professional machine is Denture Injection System.).
  • Injection molding, and the pressure is maintained for 3 minutes..
  • The color will be affected by heating time, the longer the time is, the lighter the color will be..
Check Stock

RadonSeal PRO Foundation Crack Injection Toolkit (30 ft) – The Professional Concrete Crack Repair Kit

  • No drilling required - the injection ports are glued right on top of the crack.
  • The toolkit includes a professional dual-tube cartridge injection gun.
  • No need to measure or guess - dual-cartridge gun ensures precise mixing (1:1) of components.
  • Polyurethane injection foam remains flexible allowing for the natural movement of concrete.
  • Permanently repair cracks and stop water seepage.
Check Stock

Dental Endodontic Obturation Endo System Gutta-percha Obturation Gun&Pen (White)

  • ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. ..
  • ★ The Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time..
  • ★ The Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists..
  • ★ The Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded..
  • ★ The Denture Injection Unit Consists of a Heater and a Hot Press. Heaters: Temperature Control, Timers and Electrical Systems. Hot Presses: Frames, Cylinders, Heaters, Brackets and Flasks..
Check Stock

PASS N PUFF | The Football You can Smoke | Purple and Gold Football

  • Ball - Injection Molded Medical Grade Plastic.
  • Dimensions - 4.8 Inches Diameter / 9.3 Inches Length.
  • Parts Included - Cap, Tube (smoke holder), Ball.
Check Stock

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • NEW, EASY, SAFE: DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') contains everything you need to inject, fill, and repair cracks up to 10’ in length — One Tube of DRICORE PRO Concrete Repair Structural Epoxy Injection Resin, One Tube of DRICORE PRO Concrete Repair High Strength Anchoring Epoxy Paste, Two Static Epoxy Nozzles, Ten Ports, Gloves, and Instructions.
  • MULTI-PURPOSE: Our repair pack is made to fill concrete that is cracked, broken, or split. For best results, be sure to follow the instructions closely. Consult a professional if you are not experienced with fixing or repairing concrete..
  • MADE FOR THE TASK: DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') is a high strength and water resistant concrete repair set for concrete repair jobs. Versatile enough to use both at home and at work, our industrial strength kit is great for contractors and experienced DIY repairmen doing home projects, basement, garage renovations, and more.
  • COST EFFECTIVE, SIMPLE TO USE: Our repair kit is a relatively cheap but effective way to fix your clients’ concrete structure, apartment, condo, or house. Save both time and money by using our specially engineered and designed repair package for your next project or conc....
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
  • 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check Stock

CUADRA Men's Urban Boot in Bovine Leather with Zipper Brown

  • It presents strap around the tube with metallic buckle. With laser engraving of Cuadra logo in the side and embroidered tube.
  • Care: Do not rub excessively, the fine finish of the leather can be damaged. Maintenance: Wipe with a soft and slightly damp cloth (with clean water) to remove dust, let it dry and then use a polishing sponge..
Check Stock

Jelly Filled Donuts

  • 【STAINLESS STEEL】- The churros machine is made of high quality stainless steel, corrosion resistant and durable. Ideal for filling cream and jelly in Latin fruit or donuts and other pastries..
  • 【EASY TO USE】- The extended injection port can make every part of the long churros filled with jam, and the injection opening is inclined downwards to facilitate the flow of jam into the doughnut. Excellent for filling creams and jellies inside the churros and other pastries..
  • 【MANUAL OPERATION】- The churros filler maker needs to put the jam into the barrel, align the churros to be filled with the injection port, press the handle to inject the jam into the churros, and lift the handle up when filling finished..
  • 【SUITABLE FOR】- This machine has a capacity of 5L. Suitable for tea restaurant equipment, cake room equipment, coffee shop equipment, bakery equipment, western food shop equipment etc..
  • 【QUALITY ASSURANCE】- The design is novel, easy to use, does not take up too much space, let you operate better. We ship directly from the US warehouse. Feel free to contact us if you....
Check Stock

Marcy Foldable Turbine Rowing Machine Rower with 8 Resistance Setting and Transport Wheels NS-6050RE Gray

  • 8 RESISTANCE SETTINGS – The Marcy Turbine Rowing Machine consists of eight levels of resistance that allow users to customize their workout from....
  • INCLUDES COMPUTER DISPLAY PANEL – This Turbine Rowing Machine has a built-in display panel so that you can easily monitor your speed, distance,....
  • DURABLE INJECTION MOLDED SEAT – The Marcy Turbine Rowing Machine is made with a durable ergonomically designed injection molded seat that allows....
  • ADJUSTABLE FOOT STRAPS – This exercise machine comes with two adjustable foot platforms with straps that offer comfort and stability during your....
  • HIGH-QUALITY CONSTRUCTION – This training machine is made with a solid steel frame that s you years of reliable use..
Check Stock

ACDelco Professional 32103 25 ft Bulk Reel of 5/16 in Fuel Line/PCV/EEC Hose

  • Nitrile tube that is spiral reinforced for enhanced durability.
  • NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments.
  • Vacuum rating of 24 in/Hg for sizes less than 12 in I.D., and 10 in/Hg for sizes 12 in to 34 in I.D. at ambient temperatures.
  • Warning: Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose (MPI) for fuel injection applications.
  • Intended for use with fuels where MTBE concentrations are no greater than 15% by volume.
Check Stock