Reviews Tube Extrusion Line

Stihl 0000 930 4300 CF3 Pro Trimmer Line

  • The CF3 Pro Trimmer Line is formed using 3-component, tri-extrusion technology..
  • The CF3 Pro Trimmer Line is compatible with all STIHL nylon line trimmer heads, making the CF3 Pro at home on any landscape trailer or in any garage..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance..
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

0000-930-2340 Trimmer Line .095" (280') Orange 1 Lb Roll

  • An extremely robust, long-lasting trimmer line designed for some of the toughest trimming applications..
  • This rugged line is formed using 3-component, tri-extrusion technology..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance.
Check Stock

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

  • ...Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
  • ✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
  • ✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
  • ✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams....
Check Stock

Creality 3D Printer CR-10S Pro V2 with BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm 11.8x11.8x15.7 inch with Capricorn PTFE 95% Pre-Assembled Printer

  • BL TOUCH AUTO LEVELING: Matrix automatic bed leveling, quality BLTouch automatic leveling device. CR 10S Pro V2 can automatically measure the height....
  • 500W MEANWELL POWER SUPPLY: The CR-10S Pro V2 3d printer comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power....
  • UPGRADED SILENT MAINBOARD:Creality 3D printer Cr 10s Pro v2 comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power....
  • HIGH-QUALITY EXTRUSION MECHANISM: Upgraded gear extrusion structure has double high-density gears and big extrusion force for smooth feeding. Z-axis....
  • CAPRICORN BOWDEN TUBING: Imported Capricorn PTFE tube with high temperature resistant makes the feeding smoother and ensure great printing texture in....
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

DIANN 10pcs RG6 Compression Connectors RG6 F Type Connector Coax Coaxial Compression Fitting

  • Connector Type: RF Adapter, Female Jack F- Type Connector.
  • Inner Diameter of the Wiring Tube: 8.7mm.
  • High Quality:RG6 Compression Connector Made of Nickel-Plated Brass, Which Has Good Electrical Properties, High Hardness and Not Easy to Break. The Nickel-Plated Layer Has Anti-Rust and Anti-Corrosion Effects. Long-Term Use Will Not Fall Off, Will Not Change Color.
  • Easy to Install:RG6 Compression Connector’s Quadruple Sealing System Prevents Moisture From Migrating Into the Connection. 360-Degree Radial Compression Provides Excellent Radio Frequency Performance and Integrity.
  • Applications: RG6 Compression Connector Wildey Used for Install a Satellite TV Dish / CCTV, Move Cable TV and Cable Modem, or Wire Up Cables for New House.
Check Stock

Redrex Ender 3 All Metal Bowden Extruder Tension Adjustable with Tube and Stiff Bed-Leveling Springs for Ender 3,Ender 5,CR10 Series 3D Printers

  • All Metal Extruder Replacement for Ender 3 Ender 5 CR10 Series:This durable aluminum extruder frame works more stable than plastic parts..
  • Adjustable Extrusion Spring Tension Design: The extrusion spring tension could be adjusted by tighten the screw..
  • Upgraded Stiff Bed Leveling Springs:It provides stronger tension and longer sevice life than the stock ones..
  • High Quality Bowden Tube :It was made of highly purified PTFE(Poly Tetra Fluoro Ethylene) material,it feeds the filament smoothly..
  • Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy..
Check Stock

Creality CR-10S Pro V2 3D Printer, Upgrade Creality CR-10 with BL Touch Auto Leveling Sensor Silent Board 500W Meanwell Power Supply Touch Screen Capricorn PTFE Large Build Size 11.8inx11.8inx15.7in

  • ✔️【BLTouch Auto Leveling】✔️ Matrix automatic bed leveling, quality BLTouch automatic leveling device. CR10S Pro V2 can automatically measure the height of 9 unique points on the heated bed to determine the ideal settings for perfect prints every time..
  • ✔️【Upgraded Silent Mainboard】✔️ This upgrade CR10 adopts V2.4.1 independently developed silent motherboard, which demonstrates firm properties as well as reduces noise..
  • ✔️【500W Meanwell Power Supply】✔️ Comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power supply. 100V-240V can be used, no need to adjust. It's convenient and fast, ensuring long-term stable printing..
  • ✔️【High-quality Extrusion Mechanism】✔️ Upgraded gear extrusion structure has double high-density gears and big extrusion force for smooth feeding. Z-axis double screw: good synchronization, moving more smoothly with more accurate printing..
  • ✔️【Capricorn Bowden Tubing】✔️ Imported Capricorn PTFE tube with high temperature resistant makes the feeding smoother and ensure great printing texture in this Creality 3d printer..
Check Stock

Podoy FS80 Fuel Line FS85 Grommet Kit for Compatible with STIHL KM85 FC75 FS76 FS74 Trimmer

  • The CF3 Pro Trimmer Line is formed using 3-component, tri-extrusion technology..
  • The CF3 Pro Trimmer Line is compatible with all STIHL nylon line trimmer heads, making the CF3 Pro at home on any landscape trailer or in any garage..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance..
Check Stock