Reviews Tube Bender Condensate Pump

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock

FUJIWARA Condensate Pump Exquisite Automatic Condensation Drain Removal Pump Wall Mounted Quiet for HVAC,Air Conditioner,Dehumidifier,Furnance,Ice Maker,Suitable for A/C 1-3HP 2200W (FUJ—24L)

  • ◆【SMALL EXQUISITE DESIGN CONDENSATE PUMP】: Small wall-mounted Condensate drain pump,Suitable for A/C 1-3HP（2200W） power,the flow rate & discharge head:24l/h & 33ft (FUJ—24L).
  • ◆【SUPER QUIET & QUIET ENERGY-SAVING 】: This condensate pump adopts 100-220V wide voltage design, 3w power and energy saving and environmental protection,it works so quiet,below 18 db,suitable for any indoor environment .No power consumption during standby.
  • ◆【APPLICATION RANGE】： Wall-mounted Condensate drain pump professional design for HVAC, Air Conditioner, Dehumidifier, Furnance, Ice Maker, other equipment where an automatic drain pump is required.condensate drain pump will not damage the original house decoration,simple and quick installation..
  • ◆【PROBE INDUCTION, AUTOMATIC EXCLUSION WATER】 The new probe induction technology was applied replace the original float induction, which avoids the abnormal drainage caused by the displacement of the float and the disappearance of magnetism..
  • ◆【 CONFIDENT WITH PRODUCTS QUALTY】: Any of your sincere feedback for condensate pump are welcomed.And we will try our best to solve it.Additionally, you also can choose REPLACEMENT TOOL or REFUNDING.
Check Stock

Yaheeda Tube Bender Kit,90 Degree with Reverse Bender for Copper Aluminum Soft Steel Brass 1/4” to 7/8”, HVAC Refrigeration Industry Maintenance,Containing Tube Cutter & Deburrer

  • Our manual tube bender has a compact structure, which allows it to function normally even in limited spaces. The body is made of alloy aluminum, durable and light weight, can finish the bending tasks easily. Beside the tube bender, tube cutter and durring tool are also in the package, get multiple tools in one purchase..
  • This tube bender is not hard to assemble, there is an illustrated guidance of assembly and how-to-use in the package. No more screws or nuts means no worry about losing accessories. Assembly is easy, and using is even more easier, labor-saving and time-saving, can improve the working efficency vastly..
  • The maximum bend angle of this tube bender is 90°obversely and reversely. In the situation like facing wall or corner that obverse bending is not convenient, you can use the reverse bending mode to finish task without problem..
  • The tube bender is widely applicable for pipes at different O.D.s:1/4",5/16",3/8",1/2",5/8",3/4",7/8"(6mm,8mm,10mm,12mm,16mm,19mm,22mm).There are replacable bender heads in the package with percise size all made of alloy aluminium, durable and easy to use..
  • Our tube bender is compatible with copper,aluminium,thin steel pipes,widely useful in sanitation,HVAC,radiant floor heating,refrigeration AC system and hydruali....
Check Stock

FUJIWARA Condensate Mini Pump Exquisite Automatic Condensation Drain Removal Pump Wall Mounted Quiet for HVAC,Air Conditioner,Dehumidifier,Furnance,Ice Maker,Suitable for A/C 1-5HP 3700W (FUJ—40L)

  • ◆【SMALL EXQUISITE DESIGN CONDENSATE PUMP】: Small wall-mounted Condensate drain pump,Suitable for A/C 1-5HP（3700W） power,the flow rate & discharge head: 40l/h & 33ft (FUJ—40L).
  • ◆【SUPER QUIET & QUIET ENERGY-SAVING 】: This condensate pump adopts 100-220V wide voltage design,3w power and energy saving and environmental protection,it works so quiet,below 18 db,suitable for any indoor environment .No power consumption during standby.
  • ◆【APPLICATION RANGE】: Wall-mounted Condensate drain pump professional design for HVAC,Air Conditioner,Dehumidifier, Furnance,Ice Maker,other equipment where an automatic drain pump is required.condensate drain pump will not damage the original house decoration,simple and quick installation..
  • ◆【PROBE INDUCTION, AUTOMATIC EXCLUSION WATER】: The new probe induction technology was applied replace the original float induction,which avoids the abnormal drainage caused by the displacement of the float and the disappearance of magnetism..
  • ◆【 CONFIDENT WITH PRODUCTS QUALTY】: Any of your sincere feedback for condensate pump are welcomed. If you have any questions, please contact with us, our technical team and after-sales team are always behind you..
Check Stock

Mophorn 1/4 to 7/8inch Tubing Bender 7 Heads Nylon Hydraulic Pipe Bender Copper 90 Degrees Multi-function 6-22mm Manual Ratcheting Tubing Bender Set with Bending Function Carrying Box

  • 90° Tube Bending: The ratcheting tube bender can easily and smoothly bend the diameter of 6, 8, 10, 12,16, 20, 22 mm tubes to 90 degrees. Mechanical....
  • 1/4"-7/8" Bending Range: We provide 7 interchangeable tube bender heads, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy....
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good....
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with....
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum tubes. It is widely used in sanitary and heating installations, floor....
Check Stock

Little Giant VCMA-20ULST, 80 GPH, 230 V In-Pan Condensate Removal Pump w/Safety Switch & Tubing

  • CONDENSATE REMOVAL PUMP: Little Giant Automatic Condensate Pump features 1/2-gallon ABS plastic tank, and 6-foot power cord.
  • AUTOMATIC HVAC PUMP: Ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • Three 1/8-inch diameter inlet openings allows multiple appliances to use on condensate pump.
  • 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord.
Check Stock

FUJIWARA Condensate Pump, Mini Split Automatic Condensation Drain Removal Quiet Pump,for HVAC,Air Conditioner,Dehumidifier,Furnance,Ice Maker,Suitable for A/C 1-3HP 2200W (FUJ—24S)

  • ◆【Mini EXQUISITE DESIGN CONDENSATE PUMP&PLUG CONNECTION】: Mini Split Automatic Condensation Drain Pump,Suitable for A/C 1-3HP(2200W) power, the flow rate & discharge head: 24l/h & 33ft. Plug Connection:connect brown live wire and blue neutral wire. Black is signal wire,needn’t to connect..
  • ◆【SUPER QUIET & QUIET ENERGY-SAVING 】: This automatic condensate pump adopts 100-220V wide voltage design, 3w power and energy saving and environmental protection,it works so quiet , below 16 db, suitable for any indoor environment .No power consumption during standby.
  • ◆【APPLICATION RANGE】: Mini Split Automatic Condensate drain pump professional design for HVAC, Air Conditioner, Dehumidifier, Furnance, Ice Maker, other equipment where an automatic drain pump is required.condensate drain pump will not damage the original house decoration,simple and quick installation.
  • ◆【PROBE INDUCTION, AUTOMATIC EXCLUSION WATER】 The new probe induction technology was applied replace the original float induction, which avoids the abnormal drainage caused by the displacement of the float and the disappearance of magnetism.
  • ◆【 CONFIDENT WITH PRODUCTS QUALTY】: Any of your sincere feedback for condensate pump are welcomed.And we will try our best to solv....
Check Stock

VEVOR Copper Pipe Bender, 7 Colorful Dies 1/4-7/8 inch 90 Degrees Forward and Reverse Bending, 6-22 mm for Copper & Aluminum Tubes with Reverse Bend Attachment

  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 1/4 to 7/8 inch (6-22 mm) tubes both forward and reverse to 90 degrees. It allows tight 90-degree angles to be made easily out of a wall or other difficult places. Mechanical ratchet for fast and precise bending..
  • 1/4"-7/8" Bending Range: We provide 7 colorful interchangeable tube bender dies, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy for durable use. The bending heads can meet different usage needs, making your work more convenient..
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good processing performance is widely used and sturdy for long service life..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, and hyd....
Check Stock

FUJIWARA Condensate Pump Mini Split Automatic Condensation Drain Removal Quiet Pump,for HVAC,Air Conditioner,Dehumidifier,Furnance,Ice Maker,Suitable for A/C 1-5HP 3700W FUJ—40S

  • ◆【Mini EXQUISITE DESIGN CONDENSATE PUMP&PLUG CONNECTION】: Mini Split Automatic Condensation Drain Pump,Suitable for A/C 1-5HP（3700W）....
  • ◆【SUPER QUIET & QUIET ENERGY-SAVING 】: This automatic condensate pump adopts 100-220V wide voltage design, 3w power and energy saving and....
  • ◆【APPLICATION RANGE】: Mini Split Automatic Condensate drain pump professional design for HVAC,Air Conditioner,Dehumidifier,Furnance,Ice....
  • ◆【PROBE INDUCTION, AUTOMATIC EXCLUSION WATER】: The new probe induction technology was applied replace the original float induction,which avoids....
  • ◆【 CONFIDENT WITH PRODUCTS QUALTY】: Any of your sincere feedback for condensate pump are welcomed.And we will try our best to solve....
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock