Reviews Transom Mount Trolling Motors
NyVoozy Transom Trolling Motor Mount for Kayaks, Trolling Motor Mount for Clamp-on Electric Trolling Motors, Maximum Trolling Motor Thrust of 62 Pounds
- Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don’t worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds..
- Our kayak rudder kit measures 3.75″ high x 4.75″ wide and suitable for a 23-32MM” shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It’s commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc..
- It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater..
- Very easy to install, just with screws, you could install our trolling motor mount to trolling motor only a few minutes. Because of multiple pattern screws, so you could install it on all kinds of boats..
Check StockBullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured
- PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
- FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
- ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check StockNewport Vessels 55lb Thrust Electric Kayak Trolling Motor with Kayak Mount Set
- FISH INSTEAD OF PADDLE: Get right on top of the big fish with this trolling motor and mount kit from Newport Vessels and you’ll be catching more....
- MOTOR: The ultra efficient Newport Vessels 5-star rated Kayak Series 55lb Electric Trolling Motor will keep you fishing longer in fresh or saltwater.....
- MOUNT: The Railblaza Kayak Transom Mount uses two sturdy StarPort HDs to securely outfit your kayak, this tested design can quickly be removed in....
- INCLUDES: All necessary hardware is included in kit. Install the Railblaza Transom Mount on your kayak, bolt on Newport Vessels Trolling Motor, add a....
- EEASY TO USE: Switch from paddle only, to motor ready in less than 30 seconds!.
Check StockIntex Seahawk 4 Inflatable Raft Set and 2 Transom Mount Boat Trolling Motors
- Intex 12V Transom Mount Boat Trolling Motor | 68631E.
- There will be no part of the lake out of your reach!.
- Ideal for a wide variety of boats including these Intex inflatable boats:.
Check StockWilderness Systems Transom Trolling Motor Mount for Kayaks
- Transom trolling motor bracket for clamp-on electric trolling motors.
- Marine Board backing plate keeps motor clamp tight and secure.
- Maximum trolling motor thrust of 36 pounds.
- Heavy duty 13-gauge stainless steel construction.
- Designed for any boat with a flat spot on the stern big enough for a power pole. Rectangular mounting hole pattern is 3.75” x 4.75”.
Check StockWatersnake T24 ASP - 24 Pound Thrust 12v Electric Saltwater Trolling Motor with Transom Mount
- Watersnake asp T24 electric trolling motor is the ultimate in lightweight portability weighing only 4.85 lbs (2.2kg). It's the ideal trolling motor to use on kayaks, canoes, small dinghies, and inflatable boats..
- Watersnake's simple, universal design keeps the weight down while delivering quality and performance on just about every kayak and canoe. Salt water motor with anti-corrosive paint and stainless steel external & internal parts allow you to take this motor into fresh, brackish and salt water without worry.
- The adjustable transom mount fitting makes for easy attachment and has an anti-impact clip system. This easy to steer transom motor uses a hand tiller with an extendable handle, high and low-speed control, forward and reverse switch, and a two-blade mini weedless propeller..
- So many features! Adjustable transom mount fitting. Anti-impact clip system. High and low-speed control. Forward and reverse switch. Extendable hand tiller steering..
- Measurements: Thrust: 24 lb. Volts: 12V. Amps: 9-20. Shaft: 24" (61cm). Prop: 2 Blade, weedless design..
Check StockWatersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)
- STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
- CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
- ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
- VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check StockWatersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft
- STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
- CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
- ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
- VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check StockPro Controll EZ Stand Universal Transom Mount Trolling Motor Storage Base with Stand
- SECURE STORAGE: Keeps your trolling motor secured upright and protected from damage.
- Supports a wide variety of hand controlled transom mount boat motors.
- HEAVY DUTY: Sturdy, rustproof metal stand for motor mounting.
- Lightweight yet ultra durable fiberglass reinforced nylon base for maximum motor support.
- SEAMLESS SETUP: Ready to use straight from the box.
- Ideal for boat motor strorage in between fishing trips and off season.
- SPACE SAVER: The compact base keeps your motor secure and space tidy.
- Perfectly portable at 3 lbs and 1’L x 1’ W base.
- Store on a shelf or cabinet when not in use.
- Pro Controll is passionate about helping you find the freedom to fish your way.
Check StockMinn Kota 1854053 MKA-53 Electric Steer Trolling Motor Composite Quick Release Bracket Black
- Designed to meet the increased stress created by high thrust motors and long shaft lengths.
- Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck.
- Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck.
- Constructed of marine grade composite, powder-coated aluminum, and stainless steel to resist rust, corrosion, and discoloration.
- Recommended for 112 lbs thrust and 72" shaft trolling motors.
Check Stock