Reviews Transom Bracket

Yakima - 5 Spoke Spare, Tire and Wheel for all RackandRoll Trailers

  • Shiny looking anodized coating on all aluminum parts, product is good for saltwater using.
  • Small parts are all made by solid stainless steel. Lab 1000Lbs tested, support MAX 500Lbs loading in all condition, good for inflatable boats, aluminum boats and fiberglass boats..
  • This system is designed for boats with transom, the length of the boat should not exceed16 FT & total weight within 500 Lbs. These transom wheels should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 4 holes (5/16”) in the transom for the mounting. Addition reinforcement may be required on some aluminum transom. And you can use marine sealant and suggested Sikaflex 291..
  • Benefit from its new Push Button design & max 3 stages wheel arm, the system can be adjusted while afloat in the boat leaving or coming into, it can also bring different performance position for boat launching. The wheel arm length increment is 2.5” per stage, plus the wheel’s diameter, the range of length is 22-28 inches..
  • Tire inflation: Dolly tires may not be fully inflated when shipping.
  • please only give 15-20 PSI pressure at room temperature before using. Best to use portable type digital air pump in case tire over inf....
Check Stock

Newport 9ft 6in Del Mar - Inflatable Dinghy Boat - Transom Sport Tender Boat, 4 Person - 10 Horsepower - USCG Rated, White/Gray

  • Innovative Transom Saver helps lessen stress on a boat’s transom when boat with an outboard motor is being trailered.
  • Reliably supports the cantilevered engine during transport.
  • Comes with a choice of mounts for the end attached to the trailer: roller bracket or trailer mount bracket.
  • Composite head securely holds the engine (For use with motors 100 HP and under).
Check Stock

Pro Controll EZ Mount II Bow Mount Trolling Motor Bracket

  • UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
  • STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
  • Indestructible fiberglass reinforced nylon.
  • FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
  • Spend less time assembling and more time fishing.
  • ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
  • EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Pro Controll EZ Mount Trolling Motor Bow Mount Bracket

  • MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
  • An mounting bracket that converts transom mount trolling motors to bow mount.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
  • PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
  • FAST SET UP: Simple and seamless tool-free installation.
  • Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
  • UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
  • EZ Mount lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

ACTIVE GIFT Boat Launching Wheels Set Boat Transom Launching 12" Wheel

  • Durable Premium Mmaterial: ACTIVE GIFT inflatable boat launch wheels arms are made of durable aluminum alloy with CNC processing. The shiny anodized coating on all aluminum parts provides excellent durability and a long service life..
  • Large Load Capacity: The heavy duty CNC cut bracket is very durable, the 12" boat transom launching wheel can support up to 500 lbs/227 kg. Designed to enable one people launching of an inflatable boat..
  • Easy to Install: The dinghy transom launching wheels set is easy to operate and it can be disassembled effortlessly. Wheels easily lock up when not in use and easily fold down for boat moving..
  • Widely Application: Easily move your boat from water to water with these dinghy launch wheels. Launch wheels fit most boats with a transom, such as Jon boats, dinghy, inflatable boats, mud boats, row boats, sailing dinghies, etc..
Check Stock

HILILON Transom Saver for Outboard Motor - Adjustable Motor Support Bracket with Shock Absorption, Hot-Dip Galvanized and Powder-Coated Rust Prevention, Wide Compatibility for Boat Trailers

  • Our transom saver for outboard motors helps to reduce stress on a boat's transom when being trailered, eliminating jitter..
  • The surface of the boat motor transom support is treated with hot-dip galvanizing and powder spraying methods to prevent rust..
  • The adjustable motor support bracket comes with 2 rubber traps and is suitable for outboard motors below 150HP. Adjustment range(20.27" to 30.7").
  • The new design of the hook makes it more convenient and safe to use, and our pictures provide intuitive viewing..
  • Additionally, we've added a hole in the black part of the transom saver so that it can be fixed with bolts when shock absorption is not needed..
Check Stock

Watersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Watersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

LOBOTOU Inflatable Boat Engine Outboard Motor Mount Bracket

  • Universal bracket for electric trolling motors.
Check Stock