Reviews Transmission Control Cable

AViPAS AV-1081W 10x Full HD HDMI PTZ Camera with IP Live Streaming - White

  • 【Support NDI|HX, POE】Comes with NDI interface transmission protocol, with low-latency video and audio transmission, satisfies the needs of studios and on-site multi-camera video production. It supports PoE (Power over Ethernet), just one cable can be used for power, video/audio streaming and control..
  • 【1080P 60 and 20X Zoom】The high resolution 1080P@60fps, outstanding color reproduction, 20X zoom delivers premium optics and life-like video to create the experience of sitting together in the same room, even if you are a thousand miles away..
  • 【Low Light Correction, Auto Focus】The low-light performance technology can automatically adjust the brightness level. Every moment can be seen clearly even in dark or back light condition. Take close-ups on characters, details, and there is no need to worry about blurring your image when you're speaking..
  • 【H.264&H.265 Encoding, 255 Preset Positions】Supports H.264&H.265 video compression, which makes motion video more fluent and clear under low bandwidth conditions. 10 preset positions by IR remote controller，that can save pan, tilt, and zoom settings, and smoothly transitions between them at the touch of a button..
  • 【Multi Ways to Control】You can with the hand-held remote, remote location with WBE....
Check Stock

AGPtek LKV372A 60m/190ft 1080P HD HDMI Network Extender Over Single Cat6/6a/7 Ethernet Cable with IR Remote Control

  • 【1080P Transmission】-- This HDMI extender supports 1080P HD, HD Audio, 3D.
  • It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6....
  • 【HDMI Lossless transmission】-- It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection,Adjust the....
  • 【Pure Hardware Transmission】-- It is pure hardware design,No driver needed, plug and play. Adopt full HD transmission technology to make the video....
  • 【IR Remote Control】-- Support 20~60KHz wide Frequency IR signal transmission for controlling the source device, IR Emitter Cable and IR Receiver....
  • 【Installation Requirements】-- Requires one single cat6/6A/7 cable to connect TX and RX side. Suitable for HDMI source device(computer graphics....
Check Stock

measy FHD676 Wireless Transmission System Wireless HD Extender Transmitter Receiver Video WiFi 150m Wireless HDMI Sender Ki 1080p 3D

  • GREEN WIRELESS TRANSMISSION: In an open field, The distance of the wireless transmission high-definition HDMI audio/video signals is as high as 492ft/150m. if through 1 wall the signal can transmit 10-30m/33ft-100ft. Our product's WI-FI transmission distance is enough to cover the entire conference room or room in the home, This means you don't have to buy a long HDMI cable to extend video signals..
  • HIGH QUALITY WIRELESS TRANSMISSION: Supports high-definition videos up 1080p @60Hz. Special format is used to compress and decompress video(H.264), effectively improve the transfer efficiency, to ensure that the playback fluency(high-bandwidth digital content protection technology). Digital 5GHz frequency wireless A/V high-speed transmission. Compatible with HDMI 1.3 and HDCP 1.2 ..
  • 20-60KHZ WIDE FREQUENCY IR: You can control the HDMI source device at a remote location with the included IR cables. Which means that if you have a HDMI source in your media room and a display device in your living room, while you are in the living room, you can still use your HDMI source remote to control the HDMI source with IR control extension function..
  • EASY TO USE: PLUG&PLAY: Simple and convenient installation, plug and play, do not need to set up. No complicated cable or w....
Check Stock

measy Full HD Wireless HD Extender Transmitter and Receiver Wireless Audio Video TV 1080P 3D up to 100M / 330FT for HD TV/Projector

  • GREEN WIRELESS TRANSMISSION: In an open field, The distance of the wireless transmission high-definition HDMI audio/video signals is as high as 328ft/100m. if through 1 wall the signal can transmit 10-30m/33ft-100ft. Our product’s WI-FI transmission distance is enough to cover the entire conference room or room in the home, This means you don’t have to buy a long HDMI cable to extend video signals..
  • HIGH QUALITY WIRELESS TRANSMISSION: Supports high-definition videos up 1080p @60Hz. Special format is used to compress and decompress video(H.264), effectively improve the transfer efficiency, to ensure that the playback fluency(high-bandwidth digital content protection technology). Digital 5GHz frequency wireless A/V high-speed transmission. Compatible with HDMI 1.3 and HDCP 1.2 ..
  • 20-60KHZ WIDE FREQUENCY IR: You can control the HDMI source device at a remote location with the included IR cables. Which means that if you have a HDMI source in your media room and a display device in your living room, while you are in the living room, you can still use your HDMI source remote to control the HDMI source with IR control extension function..
  • EASY TO USE: PLUG&PLAY: Simple and convenient installation, plug and play, do not need to set up. No complicated cable ....
Check Stock

Crazy Sales CNC Lathe Controller, Numerical Control System, High Precision for Program Editing Program Reading(Four axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

Low Noise CNC Lathe Controller, Simple Operation Numerical Control System, for Program Editing Program Reading(Dual axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

Headphones Cable Replacement Cord for Bose QuietComfort 25/35 / 35II /On-Ear 2/OE2/OE2i/Soundlink/SoundTrue Headphones Aux Extension Cord with Inline Mic Volume Control

  • Compatibility: Compatible With Bose QuietComfort 25 / 35 / 35 (Series II) QC25 / QC35 II / QC35 /On-Ear 2/OE2/OE2i/Soundlink/SoundTrue Headphones Replacement Cable Headphones Cord. Working with standard 3.5mm audio jack plug to media devices and 2.5mm audio jack plug to headphones..
  • Superior Sound Quality: The audio cable adopts 24k gold plated connectors which ensures clear audio transmission. So you can enjoy the fantastic sound quality and natural music..
  • Premium Cord Material: Tangle-free cable made of TPE, and the Reinforced Wire Control Circuit Board design can also guarantee the extreme audio output transmission..
  • Plug and Play: The control button allows you to answer/reject phone calls or play/pause music immediately. The Volume+/Volume- can control the volume level as you like..
  • Quality Assurance：BINGLE supports a 30-day money-back guarantee and a 1-year warranty. We will back Bingle and be devoted to all customer's interests..
Check Stock

UGREEN HDMI Switch 5 in 1 Out [email protected], HDMI Splitter with Remote 5 Port HDMI Switcher Selector Support 3D CEC HDR HDCP2.2 Compatible with PS5/4/3 Xbox Nintendo Switch Roku TV Fire Stick

  • ...lugging and unplugging HDMI cables. And with 5 LED indicators, you can easily know which port is active from the LED light..
  • High Resolution: Support [email protected] resolution and backward compatible [email protected], 2560*[email protected], 1920*[email protected], creating an impressive lossless image and audio transmission for you and enjoying 3D visual. UGREEN HDMI switcher also supports HDMI 2.0/1.4, HDCP2.2/1.4, VRR and Dynamic HDR Chroma 4:2:0 / 4:2:2 / 4:4:4. All HDMI ports support HDR/3D/CEC. Tip: If you want [email protected], the HDMI cable should be input within 10FT and output within 10FT..
  • Remote Control and Manual Switch: Comes with remote control, which enables to swap video sources without leaving a comfortable couch (The remote control range is within 33FT). A manual switch lets you switch between 5 game consoles at any time with a flick of a button. And the LED will indicate which port is active. NOTE: This HDMI switch with remote DOES NOT support Automatic Switching. Not include 2*AAA Batteries..
  • Fast and Stable Transmission: This HDMI switch box supports high bandwidth 18Gbps data transmission, and input and output AWG30 HDMI standard cable length could reach up to 9FT. USB Powered design ensures stable video transmission and bet....
Check Stock

MIDI Y Splitter Cable Adapter, Din 5 Pin Female Jack to Dual 2 Male Plug Socket MIDI Cable for MIDI Mixers,MIDI Keyboards,Music Mixers Electronic Pianos

  • Connector 2: Dual MIDI DIN 5-pin male plug..
  • MIDI Splitter Y Adapter Cable is designed to split one MIDI DIN 5-pin female audio signal to dual MIDI DIN 5-pin male audio signal for transmission..
  • This MIDI Splitter Y Adapter Cable is widely used in MIDI keyboards, MIDI mixers, electric pianos, guitars and other Euro-style stereo equipment with DIN 5 connectors..
  • The cable adopts nickel-plated connectors to be firm and stable, and the cable core is made of oxygen-free copper core material with high transmission efficiency and zero delay.Durable dual shielding layer of PE cable, waterproof and crack resistant. The cable jacket is soft and durable and has a long service life..
  • The Cable is AWG 21, Any musical instrument device with with one MIDI to control other 2 MIDI interface..
Check Stock

CNC Lathe Control, 150 kHz Frequency Controller with Maximum Pulse Output Automatic 0 Operation 32-bit CPU Numerical Control System Metalworking Equipment(Four axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock