Reviews Trailer Hitch Ball Cover Bumper Guard

CURT 45534 Trailer Hitch Mount, 2-Inch Ball, Lock, Fits 2-In Receiver, 7,500 lbs, 2\ Drop, Cap

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-inch diameter ball, 5/8-inch hitch pin hole and 8-1/4-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch lock to securely mount onto your hitch receiver and deter theft.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat, and the trailer ball has a polished chrome plating. It also comes with a durable storage case and a rubber hitch cover to protect the receiver.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy.
Check Stock

Gator Guards Hitch Guard - Tow Hitch Protector - Easy DIY Installation - Allows Full Use of Trailers and Equipment - Total Coverage, Polymer Cover - Made in The USA - Black

  • WORRY FREE PROTECTION: Painful injuries will be a thing of the past with our full 360 degree tow hitch protector - No more bruised knees or shins!  Fits most single ball hitches and a standard ball mount width between 2-3 inches..
  • LOW PROFILE DESIGN: Engineered with automotive-grade polymer, our full coverage hitch guard provides full use of your trailer hitch and does not obstruct your wires or connectors. For year round protection our tow guard is pliable in -70F -  150F degrees..
  • INSTALLS IN SECONDS:  Simply slide on your Gator Guard Hitch Guard to your existing tow hitch, tighten the zip tie and go!.
  • MADE IN THE USA: Innovative and effective with the quality of American workmanship, our hitch guard allows for unrestricted use of your trailer and equipment..
  • SATISFACTION GUARANTEE: With over 25 years of experience, we take customer satisfaction seriously! If our Gator Guards Hitch Guard doesn’t meet your expectations, we proudly stand behind our product with our 100% Satisfaction Guarantee..
Check Stock

TLAPS 7422440694619 For 2007-2018 Chevy Silverado/GMC Sierra 1500 Class 3 III Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 2007-2018 Chevy Silverado 1500 New Body Style Models, 2019 Chevy Silverado 1500 LD All Models, 2007-2018 GMC Sierra 1500 New Body Style Models, 2019 GMC Sierra 1500 Limited All Models ( Attention Note: Will Not Fit 2007-2018 Models With Roll Pan Bumper / Tommy Gate Lift / 10 Inch Drop Bumper, Will Not Fit 2007 Classic Models, Will Not Fit 2500 HD / 3500 HD Heavyduty Models ).
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Towing Specifications: Weight Carrying Capacity - 6000 lbs, Tongue Weight - 600 lbs, Weight Distribution - 10000 lbs, Weight Distribution Tongue Weight - 1000 lbs.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
Check Stock

Chevy Z71 Logo Tow Hitch Cover

  • ADD A PERSONAL TOUCH TO YOUR TRUCK/SUV: High quality & high strength Aluminum Alloy trailer tow hitch cover guard with ultra thin embossed U.S. American Flag emblem panel covers..
  • HEAVY DUTY HITCH COVER: Our trailer hitch cover is electro-plated for added durability, corrosion resistant, for a longer life span. And a built-in rubber gasket to eliminate any rattling..
  • APPLICATION: Fits standard 2" inch trailer hitch receivers on tow trucks, SUVs, JEeps, etc..
  • SUITABLE FOR OUTDOOR: UV and scratch resistant. Able to withstand harsh weather and conditions. Protects your your hitch receiver from dirt and debris..
  • SIMPLE INSTALLATION: Large high quality 5" x 3"Aluminum hitch cover, includes hitch pin and other necessary hardware..
Check Stock

Shocker HD Air Hitch with Dual Ball Mount - 2 & 2 5/16 inch Balls - 20,000 lbs - Fits Chevy Silverado / GMC Sierra 2500 3500 (2015-2023), Fits 2-1/2\ Hitch

  • Built in heavy-duty airbag gives you smoother safer trailer towing. Improves your ride, reduces wear & tear on pickup & trailer. Instant air ride towing for your pickup & trailer. Built in airbag cushions ride & absorbs road shock.
  • Air ride technology filters road shock through built in air spring bag and cushions the ride. Fine tune for your towing weight. Just add air for heavier loads. The air bag sits under receiver tube. Adjust the air pressure for the best ride and load control..
  • 20,000 lbs towing capacity & 2,000 lbs tongue weight. 8 Adjustment Holes for 1/2 to 4-1/2 inches of drop. Includes Combo Hitch Balls - 2" and 2 5/16" - Just flip around when pulling trailers with different couplers. Combo ball rated 16,000 gtw & 1,600 tw for 2-5/16 ball and 8,000 gtw for 2" ball.Choose 2" or 2-1/2" receiver hitch shank.
  • Includes Shocker HD air bumper hitch base frame, adjustable combo ball (2" & 2-5/16" ball) along with 2 D-handle ball mount pins. Made in the USA by Shocker Hitch, Arthur, ND. 10+ Ball Options (Sold Separately).
  • Safety Notice: The Shocker Hitch is a heavy duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the truck ....
Check Stock

TLAPS 7422440213216 For 1988-2000 Chevy/GMC C10 C/K Pickup 1500 2500 3500 Class 4 IV Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 1988-1999 Chevy C10 C/K Pickup 1500 Models, 1988-2000 Chevy C10 C/K Pickup 2500 / 3500 Models, 1988-1999 GMC C10 C/K Pickup 1500 Models, 1988-2000 GMC C10 C/K Pickup 2500 / 3500 Models ( Attention Note: Will Not Fit 1500 Models With Dual Exhaust / 10 Inch Step Bumper, Will Not Fit 2500 / 3500 Models With Dual Exhaust / 10 Inch Step Bumper / Crew Cab / Cab & Chassis ).
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 4, Receiver Size: 2" Receiver Tube, Heavy Duty Purposes With Larger Weight & Carry Capacity + Stronger Materials Than Class 3, Towing Specifications: Weight Carrying Capacity - 10000 lbs, Tongue Weight - 1000 lbs, Weight Distribution - 12000 lbs, Weight Distribution Tongue Weight - 1200 lbs.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

Bosswell Chevrolet Chevy Hitch Cover - Licensed LED Light Trailer Towing Hitch Cover Receiver Black 6530

  • Perfect Fit - For standard 2" inch trailer hitch receivers on tow trucks, SUVs, etc..
  • Heavy Duty Hitch Cover - Winunite trailer hitch cover is electro-plated for added durability, corrosion resistant, for a longer life span..
  • Provide a Unique Look For Your Truck/SUV - High quality & high strength metal trailer tow hitch cover guard with embossed U.S. American Flag emblem panel covers..
  • Suitable For Outdoor - UV and scratch resistant. Able to withstand harsh weather and conditions. Protects your your hitch receiver from dirt and debris..
  • Simple Installation - Large high quality 5" x 3" hitch cover, No including hitch pin..
Check Stock

Bolt-on RV Bumper Hitch Receiver Adapter Fits 3-4" Beam, 2" Receiver, Trailer Accessories Best for Mounting Bike Racks & Cargo Carriers

  • Upgrade the Patented design : Depending on the different width of the steel beam and the gap of the adapter, these two bolts have the adjustment function, can lock the steel beam, without shaking！ Patented products, please do not imitate !!.
  • VERSATILE DESIGN: The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 2-3-4-4.5" bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs..
  • 200LBS TONGUE WEIGHT CAPACITY: The Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2"-4.5" RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, 4 bolts included for Mounting hardware..
Check Stock

Shocker HD 20K Air Receiver Hitch with Dual Ball Mount - 2 & 2 5/16 inch Balls - 20,000 lbs - Fits Ford SuperDuty F250 F350 F450 F550 2017-2023 Fits 2-1/2 Hitch

  • Built in heavy-duty airbag gives you smoother safer trailer towing. Improves your ride, reduces wear & tear on pickup & trailer. Instant air ride towing for your pickup & trailer. Built in airbag cushions ride & absorbs road shock.
  • Air ride technology filters road shock through built in air spring bag and cushions the ride. Fine tune for your towing weight. Just add air for heavier loads. The air bag sits under receiver tube. Adjust the air pressure for the best ride and load control..
  • 20,000 lbs towing capacity & 2,000 lbs tongue weight. 8 Adjustment Holes for 1/2 to 4-1/2 inches of drop. Includes Combo Hitch Balls - 2" and 2 5/16" - Just flip around when pulling trailers with different couplers. Combo ball rated 20,000 gtw & 2,000 tw for 2-5/16 ball and 10,000 gtw for 2" ball. Choose 2" or 2-1/2" receiver hitch shank.
  • Includes Shocker HD air bumper hitch base frame, adjustable combo ball (2" & 2-5/16" ball) along with 2 D-handle ball mount pins. Made in the USA by Shocker Hitch, Arthur, ND. 10+ Ball Options (Sold Separately).
  • Safety Notice: The Shocker Hitch is a heavy duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight....
Check Stock