Reviews Trailer Hitch Adapter Bumper Guard

Bolt-on RV Bumper Hitch Receiver Adapter Fits 3-4" Beam, 2" Receiver, Trailer Accessories Best for Mounting Bike Racks & Cargo Carriers

  • Upgrade the Patented design : Depending on the different width of the steel beam and the gap of the adapter, these two bolts have the adjustment function, can lock the steel beam, without shaking！ Patented products, please do not imitate !!.
  • VERSATILE DESIGN: The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 2-3-4-4.5" bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs..
  • 200LBS TONGUE WEIGHT CAPACITY: The Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2"-4.5" RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, 4 bolts included for Mounting hardware..
Check Stock

Towever 83801 RV Bumper Hitch Receiver 2 inches Adapter for 4-4.5 inches Travel Trailer Rear Bumper

  • This travel trailer RV accessories fits 4″- 4.5″ square bumpers (can be mounted upside or down bumper beams ).
  • For hitch mount 2″ shank of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity.
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL.
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish.
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper.
Check Stock

CURT 45405 Trailer Hitch Receiver Adapter Reducer Sleeve, 2-1/2 to 2-Inch

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter measures 2-1/2-inch x 2-1/2-inch to fit any industry-standard 2-1/2-inch trailer hitch receiver. It also accepts any industry-standard 2-inch x 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve is fast and easy. You can use it as needed by simply inserting it into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

CURT 45408 Trailer Hitch Receiver Adapter Reducer Sleeve Set, 3 to 2-1/2 or 2-Inch, 2-Piece

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve set easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 3-inch receiver and accepts a 2-1/2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter set measures 3-inch x 3-inch to fit any industry-standard 3-inch trailer hitch receiver. It also accepts any industry-standard 2-1/2-inch or 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter set is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve set is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve set is fast and easy. You can use each of the included reducer sleeves as needed by simply inserting them into your hitch receiver (hitch pin sold separately).
Check Stock

CURT 45048 Trailer Hitch Receiver Adapter Reducer, 2-1/2 to 2-Inch, 34-In Extension, 4,500 lbs , Black

  • VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 34 inches of extra length to your hitch receiver. It can also be trimmed to as little as 24 inches.
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch trailer hitch receiver. It accepts an industry-standard 2-inch shank. It is equipped with built-in safety chain loops.
  • SOLID STRENGTH. This hitch receiver adapter is rated for 4,500 lbs. GTW and 450 lbs. TW (6,000 / 600 lbs. at 24 inches). It can also be used with a weight distribution hitch for 6,000 lbs. WD and 600 lbs. WDTW (8,000 / 800 lbs. at 24 inches).
  • CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
Check Stock

CURT 19030 Step Bumper Hitch Receiver, 2-Inch, 5,000 lbs.

  • EASY TO INSTALL. This bumper hitch can be used on a wide variety of trucks and SUVs, featuring slotted mounting holes spaced 8-1/2 inches apart, on-center. This trailer hitch receiver is designed to bolt onto the bottom of the truck's step bumper.
  • DEPENDABLE STRENGTH. This step bumper hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. For a wide variety of towing options, this bumper hitch receiver equips your truck with a standard 2-inch x 2-inch hitch receiver. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. This bumper mount hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This hitch bumper receiver is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
Check Stock

TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on

  • Attention: This accessories is NOT intended for RV level Trailer towing Purpose, PLEASE BE CAREFUL to using.
  • [STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included.
  • [EASY TO INSTALL] It has 4 full threaded bolts and nuts. It can be easily mounted on your RV bumpers. Fits most of 4" to 4-1/2" Continuous Steel Bumper Beams (Can be Mounted Upside Down). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper.
  • [DEPENDABLE STRENGTH] Made of heavy duty steel construction. Robotically weld provides more secure.
  • [CORROSION RESISTANCE] For long term use, this hitch adapter is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances.
Check Stock

Adjustable Trailer Hitch 8” Drop/Rise Hitch Ball Mount for 2” Receiver, Aluminum Tow Hitch with 2 Stainless Steel Pins Locks, 12,500 LBS GTW, 2\ and 2-5/16\ Chromed Steel Balls for Heavy Duty Truck

  • 【Adjustable Trailer Hitch】The integrated ball head eliminates the need for ball mounts and won’t ever fall off and it also reduces vibrations, chucking noise, and rattling when towing. The kit includes two locking hitch pins with 2 keys that prevent theft while connected to your vehicle and secure the ball mount platform..
  • 【Heavy-Duty Towing Capacity】2" hitch ball has towing capacity of 8,000 lbs, while 2-5/16" hitch ball has the highest rated towing capacity of 12,500 lbs, and allows for a 8" drop down depth and 8” rise height so the hitch can be adjustable and quickly exchange for optimal towing. You can haul heavier loads such as heavy trucks or RVs with ease..
  • 【Versatile Usage Trailer Hitches】Our standard 2"*2" receiver can perfectly fit any connector of trailer, rear bumper, agricultural machines and dual receiver extender with the same size. This tow hitch is ideal for towing and hauling boats, trailers, truck, campers, livestock trailers, recreational vehicle trailers, dirt bikes, ATVs, motorcycles, etc..
  • 【Ball Hitches for Trucks】The lightweight, aircraft-quality aluminum alloy body is rust-free and provides maximum strength. Rest assured the receiver hitch is manufactured with the finest materials and durable structures. Silv....
Check Stock

Rear 2’’ Receiver Trailer Tow Hitch Step Bar Bumper Guard W/Led Brake Light For Truck Suv Van

  • Precision designed to match your vehicle’s body lines. Trailer hitch step bar are a great addition to any truck, suv, or van. They can protect the vulnerable, molded bumpers in the event of a collision.
  • Solid all-welded construction for maximum strength and safety. High quality steel constructions,they come prepped with advanced powder coating. Rust protection. Built to strict quality control standards.
  • Rear hitch drop step bar bumper guard is waterproof and shock-resistant. Able to withstand road abuse & heavy duty towing purposes to it's specified capacities.
  • Quick installation,easy bolt-on. No cutting and no drilling. Bolts and instruction are not included.
  • 350 Lbs Weight Capacity,32.5" Long Bar. 2.25" diameter square Bar. Fits 2" Receivers. Package Include: 1 X Trailer Hitch Step Bar(W/Led Brake Light).
Check Stock

CURT 45796 18-Inch Long Trailer Hitch Extension for 2-Inch Receiver, 3,500 lbs , Black

  • ADDED CLEARANCE. This trailer hitch extension adds 18 inches of extra length to your hitch receiver, providing additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock