Reviews Trailer Door Stop

Tekonsha ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit

  • Activates a trailer's stop/turn/tail/running lights without cutting or splicing into your vehicles wiring system - simply snap on included current sensors.
  • Use when: trailer has more than 1 light assembly per side and is equipped with multiple clearance or running lights.
  • if tow vehicle may tow a variety of trailers.
  • Re-settable short circuit/overload protection - guards itself and the tow vehicle from shorts and wiring install mishaps.
  • rated at 4.2 amps for turn/stop circuits, 7.5 amps for taillight circuit.
  • Works on all vehicle types including standard, PWM and/or multiplex systems, ensuring full brightness of the trailer lights during operation.
  • ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system.
  • Isolates trailer light operation from tow vehicle's electrical system.
  • 5 amps for taillight trailer circuits. Works with low side Switched vehicles.
Check Stock

LIMICAR Trailer Wiring Harness Kit, 25ft Trailer Wire, Trailer Wiring Harness with 4 Flat Extension Connector, 4 Pin Flat Wishbond Trailer Wiring for Utility Boat Trailer Light Kit

  • 25FT Male & 4-Flat Female Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (25' & 4') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 25' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
Check Stock

10 Pcs Black Adjustable Corner Braces for Bed, 3 x 2 x 2 Inches Steel L Shape Right Angle Brackets for Wood Furniture , 4 Slotted Hole Adjustable Mounting Hole ,2.6 mm Thickness

  • ✅ CLOSED BAR HOLDER or TRAILER STAKE POCKET - Wide use of KOOL 360® brackets , CLOSED BAR HOLDERS for door barricade or STAKE POCKETS for flatbed trailers and flatbed trucks..
  • ✅ HEAVY DUTY SECURITY BRACKETS - KOOL 360® brackets crafted from thick stainless steel, up to 1/8” (3mm) thick , 2.5” wide, rust-free , super sturdy and durable..
  • ✅ CLOSED BAR HOLDER - Shipped with steel screws , making installation hassle-free. Pre-drilled pin hole design , your choice to add a pin so the bar NOT easily be removed from another side of the door..
  • ✅ TRAILER STAKE POCKETS - Heavy duty rustless steel stake pocket for flatbeds and trucks, for 2” x 4” board or steel stake posts..
  • ✅ GATE CROSS BAR HOLDER - An easy and low cost measure to stop intruders , break-ins , burglars. Some use this simple measure to protect doors and windows during hurricanes or tropical storms !.
Check Stock

Partsam 6Pcs 5x3' Rectangle Stop/Turn/Tail & Backup/Reverse Truck Trailer Hitch Light 12 LED Grommet Hardwired Flush Mount (4xRed+2xWhite)

  • Package includes 6 Pieces 5x3 Rectangle Led Stop Turn Tail Lights and Backup Reverse Truck Trailer Hitch Lights(4 Pieces red lights and 2 Pieces white lights). Rate for 12V,test to 13.8V.
  • Each led tail light has 12 leds and provide super night vision and enhance visibility during night. Functions of 5x3 Rectangle led trailer lights: stop light, turn signal light, tail lights (Red 5x3 lights) and back-up lights or reverse lights(White 5x3 led lights). NOTE: People call it 3x5 rectangle led lights on Market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size), drill a hole about 5-5/8" to install it.
  • These taillights are HARDWIRED with 3 wires: White Wire is the Ground.
  • NOTE: These 3x5 lights are NOT "plug and play" lights. It does not have the standard 3 prong plug that these style trailer lights typically do, You need to hardwire them. It’s a very easy thing to do.
  • These led trailer tail lights are univeral for almost all vehicles, such as: Trucks, trailers, tractors, semi trailers, Dump Trucks, horse trailer, enclosed trailer, cargo trailer, golf cart, flatbed, UTV etc..
  • Warranty: We truly offer 1 year warranty for these recta....
Check Stock

NU-SET Lock | RV High Security Hasp Latch for Trailer Door | 8 1/4 Inch Trailer Hasp Lock | RV Accessories & Door Hardware (Gray)

  • RV DOOR LATCH HASP: 8-1/4-Inchsteel flat hasp for superior strength.
  • HASP LATCH: Zinc plated for corrosion resistance.
  • TRAILER DOOR LOCK HASP: Ideal to work with hockey puck padlock.
  • TRAILER HASP LOCK: RV door lock hasp designed for maximum trailer security.
  • TRAILER DOOR HASP LOCK DIMENSIONS: 8.25" x 4.5" x 1.5" | 2.29 lbs.
Check Stock

LIMICAR Trailer Wiring Harness Extension Kit, 36ft Trailer Wiring Harness with 4 Flat Extension Connector, 28' Male & 8' Female with 4 Pin Flat Wishbond Trailer Harness for Utility Boat Trailer Lights

  • 36FT (28' Male & 8' Female) & 4-Flat Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (36') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 36' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
  • Widely Application: Suitable for marine boat trailer, horse trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug). Not compatible with motorcycle....
Check Stock

CZC AUTO 12V Two Sided Magnetic Towing Light Kit for Trailer RV Boat Truck -Magnetic Strength 55 Pounds

  • Main Purpose: Works as a complete trailer tail light guard box set for your new or existing trailer, has stop turn tail lighting modes. Can be directly welded on or bolted on to the rear, side, bottom or top frame of your trailer..
  • Solid Built : Made of heavy duty steel, painted with quality black powder-coated finish, and pre-cut holes for 6” oval light, 2” round side light & license plate mounting. Durable for all weather elements..
  • Awesome Brightness: Use high-quality SMD LED, lights output excellent high brightness red light for stop turn light, low brightness for tail side marker light, greatly improving visibility and ensuring you a safer night..
  • Color Coded Wires: White wire with O ring terminal for ground, black wire for tail side marker light, red wire for stop turn light..
  • Simple Installation: All in a set and lights are mounted on the box. Just hardwire each pigtail wire to the corresponding wire on trailer. And then weld on or bolt on the light box to the trailer frame.
Check Stock

Partsam 4Pcs 4" Round Red LED Stop Turn Tail Lights Brake Trailer Lights 24LED, 4 Inch Round Led Trailer Tail Lights Red Flange Mount Waterproof for RV Trucks 12V DC

  • Package includes 4 Pieces 4 inch Round Led Stop Turn Tail Lights Flange Mount Red with 24 LED.
  • This Waterproof round led trailer lights 24 LED serves 3 functions as stop light, turn signal light and tail light.
  • Mounts on surface of trailer with built-in flange.
  • These round tail lights are Approx. 5.4 inch diameter flange ring and 4" inner diameter and 1.1" Thickness and require a 4.38" diameter hole(check detailed page 1).
  • IP65 waterproof light fixture and withstand the corrosion of sand, dust, dirt, rain, snow etc..
  • Easy to install: these 4 round led lights are HARDWIRED with 3 wires, Gray is the ground, red is the high brightness for stop light / turn light / brake lights and Green for low brightness as tail light / running light.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led tail l....
Check Stock

LIMICAR LED Trailer Lights Kit, Submersible Square Stop Turn Tail Trailer Light Kit, Red/Amber Trailer Marker Lights, 3rd Brake ID Light Bar for Utility Trailer Truck Boat RV Camper Snowmobile

  • BRIGHT LIGHTING: This LED Trailer Lights Adopts 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light.
  • 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light with license plate lamp.
  • No glare, much brighter and more energy-efficient than halogen bulbs. Side lens lights and side marker lights are all LED lights as well. Ultra bright but energy-efficient..
  • PACKAGE INCLUDES: Includes 2 Square LED Trailer Light Kit, 4 Amber 2 Red Fender Marker Lamps, 11LED 3rd Brake Identification Light Bar, 25ft Trailer Wiring, License Plate Bracket, Mounting Hardware..
  • PRACTICAL FUNCTIONS: LIMICAR Trailer Lights LED Kit Functions as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar..
  • WATERPROOF: IP67 Waterproof. This Trailer Light Kit is completely sealed. Adopts welding technology for better waterproof performance. The screws have been removed from the lampshade to prevent water invasion better, effectively protects the tai....
Check Stock

Partsam 8Pcs 4" Round Red LED Trailer Tail Light, 4 Inch Round Led Stop Turn Tail Lights Brake Brake Trailer Lights for RV Trucks, Rubber Grommets and 3-Prong Wire Pigtails Included

  • Package includes 8 Pieces 4 inch Round Led Stop Turn Tail Lights Red, Grommets and 3-prong wire pigtails are included for complete installation.
  • This Waterproof round led trailer lights 12 LED serves 3 functions as stop light, turn signal light and tail light.
  • Recessed mount with grommet and Pigtails.
  • These round tail lights are Approx. 5 inch diameter Grommet Ring and 4" inner diameter and 1 3/16" Thickness.
  • IP65 waterproof light fixture and effectively withstand the invasion and corrosion of sand, dust, dirt, rain, snow etc..
  • Easy to install: White is the ground, red is the high brightness for stop light / turn light / brake lights and Black for low brightness as tail light / running light.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led tail lights are compatible with almost All automobi....
Check Stock