Reviews Trailer Bumper Bolts

RV Bumper Hitch Receiver 2 inch Adapter Receiver Fits for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose

  • Upgrade the design: Universal, applicable to different width and height of the steel beam, the most important thing is that according to the diferent steel beam, has the adjustment function, can tightly lock the steel beam does not shake ! Patented products, please do not imitate !!.
  • VERSATILE DESIGN:The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, Instructions, 4 bolts included for Mounting hardware..
Check Stock

Swagman RV Approved 4-Bike Bumper Rack

  • Transports 1, 2, 3, or 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike).
  • Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper.
  • Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion.
  • Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while....
  • Simple to use and supports various bike sizes, frames and wheels.
Check Stock

Towever 83803 Trailer Hitch Receiver RV Bumper Hitch Receiver 2 Inch for 4 x 4 Inches Square RV Bumper Rack Trailer Towing Purpose

  • The RV Camper bumper hitch adapter 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams..
  • Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced..
  • The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight..
  • 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside..
  • Heavy duty constructed and black powder coated for corrosion resistance.ATV hitch adapter is hitch extender 2 inch, good rv camper accessories for travel trailers..
Check Stock

Seachoice Trailer Coupler, Repair Kit, 2 in.

  • Quickly mounts to your trailer tongue. Choose from vertical channel mount (fits 3-1/2 inch wide OD / 3 inch ID vertical channel with 2 inch on center bolt pattern secure with 5/8" pins or bolts) or square plate 4 bolt mount (4-1/2 inch square bolt pattern).
  • Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Great for heavy duty trailers from end dumps, race trailers, cargo trailers, tilt trailers, storage container & flat beds Instant air ride for your trailer..
  • 20,000 lbs rated trailer towing capacity with a cast 2 5/16 inch heavy duty demco cast coupler. 2,000 lbs tongue weight. Great for bumper pull race trailers, dump trailers and skid steer trailers..
  • Air ride technology: Built-in HD air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Perfect when you don't know what pickup will be towing your trailer. Fine tune for your towing weight. Just add air for heavier loads. Absorbs the road bumps, thumps & bangs on whatever road you travel.
  • Made by Shocker Hitch USA. Optional weld-on vertical tongue adapter available &sold separately. Note: The main pivot bolt used in the Tongue Mount air coupler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to pre....
Check Stock

CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
Check Stock

TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on

  • Attention: This accessories is NOT intended for RV level Trailer towing Purpose, PLEASE BE CAREFUL to using.
  • [STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included.
  • [EASY TO INSTALL] It has 4 full threaded bolts and nuts. It can be easily mounted on your RV bumpers. Fits most of 4" to 4-1/2" Continuous Steel Bumper Beams (Can be Mounted Upside Down). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper.
  • [DEPENDABLE STRENGTH] Made of heavy duty steel construction. Robotically weld provides more secure.
  • [CORROSION RESISTANCE] For long term use, this hitch adapter is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances.
Check Stock

Discount Ramps RV or Camper Trailer Bumper Bike Rack for 1-2 Bicycles

  • Transports 1-2 bicycles on an RV or camper trailer bumper (max 60 lb. capacity).
  • Designed for 4″ to 4.5″ square RV bumpers, installs with (2) 6.5″ U-bolts around the RV bumper.
  • 1.75″W Tire wells with 6.5″ spacing between wells, 4.5″ from bolt to first well.
  • Single L-style support tie-down 19.5″H brace (bicycle tie-downs sold separately).
  • Heavy duty steel construction with a black paint finish.
Check Stock

Elevate Outdoor RV or Camper Trailer Bumper Bike Rack for 1-4 Bicycles

  • Transports 1-4 bicycles on an RV or camper trailer bumper with a max 140 lb. capacity.
  • Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper.
  • 2" W Tire wells with 5.25" spacing between wells, 4" from bolt to first well.
  • please note that tire wells will not fit standard mountain bike tires.
  • bicycle straps/tie-downs sold separately).
  • Heavy duty steel construction with a black paint finish.
Check Stock

HITOWMFG RV Bumper Bike Rack Carrier Hitch Receiver Adapter for 4~4.5 Square RV Bumpers Bike Cargo Coachman

  • 2" STANDAR FIT. This Heavy-duty square RV bumpers and accepts 2" cargo carrier and bike rack tubes.
  • CAPACITY. 200Ib tongue weight, designed Specifically for 2" tube bicycle racks or cargo.
  • ADJUSTABLE DESIGNE. It's for 4" or 4.5" continuous welded RV bumpers, the adapter takes 4 bolts and secures tightly around the travel trailer bumper.
  • WEATHER RESISTANT. Finished in Powder coating provide durable and strong conditions, resist dust and corrosion, adds extra durability.
  • PACKAGE INCLUDE. One adapter, 4 bolts, 1 plate and hardwares which is needed (pin is not include).
Check Stock

LIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

  • 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
  • It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
  • Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
  • 2 x tie plates for 1-3/4" or 2" leaf springs.
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock