Reviews Toyota Diagnositc Tool

OEMTOOLS 37138 Compression Tester Gauge Set, Compression Tester Automotive, Engine Compression Tester with Flexible Hose, 14mm and 18mm Adapters

  • ESSENTIAL CYLINDER COMPRESSION TESTER: Monitor the health of your engine with an accurate reading from our tester.
  • Featuring a 14mm and 18mm adapter for spark plug ports.
  • Read the condition of your engine’s cylinders with our easy-read pressure gauge.
  • ACCURATE COMPRESSION READINGS: Our engine compression gauges give you an accurate reading of engine's compression.
  • The compression test kit's flexible rubber hose extension allows you to easily access spark plug ports.
  • GREAT FOR CARS AND TRUCKS: Maintaining your vehicle’s engine is essential to the longevity of the vehicle.
  • Work on cars and trucks with the cylinder compression test kit's 2-step 14mm and 18mm adapters to determine the health of your cylinders.
  • DIAGNOSITC TOOL: Diagnose problems with your vehicle’s cylinders using our engine compression test kit.
  • Valves sticking, cracked cylinder heads, worn cylinder walls, and more can be diagnosed with our cylinder compression tool.
  • PRODUCT SPECIFICATIONS: This compression tester kit features a flexible rubber hose extension to reach spark plug ports.
  • (2) 2-step adapters sized 14mm and 18mm for cars and trucks.
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

EWK Oil Change Tool Set - 64mm Oil Filter Wrench, Drain Hose, Oil Funnel for Toyota, Lexus, Scion 2.0L - 5.7L Oil Filter Systems

  • 【 Convenient Set 】 Includes every tool you need to remove and refill the engine oil, the Toyota oil filter wrench for removing the oil filter housing cap, an oil filter drain hose for draining the filter housing without splatter, and a threaded-on oil funnel for refilling the engine oil..
  • 【 Wide Applications 】 The 64mm Toyota oil filter tool and funnel fits most Toyota, Lexus, and Scion vehicles. Such as RAV4, Camry, Tundra, Highlander, Sienna and more equipped with 2.0L to 5.7L / 6 & 8 cylinder engines that use Toyota's cartridge style oil filter system..
  • 【 Clean & Fast Oil Change 】 The drain tool makes the oil change process much cleaner by directing oil flow right into your oil pan to prevent splatter. To refill the oil, simply leave the whole oil bottle in the leak-proof oil funnel to completely drain while retrieving to open the next one..
  • 【 Tough and Sturdy 】 EWK 14 flutes oil filter socket for Toyota is forging from aluminum instead of casting, which provides enough power to rotate the over-tightened oil filter cap without stripping the flutes on your plastic housing..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any pro....
Check Stock

Motivx Tools Oil Filter Wrench and Drain Tool Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Oil Filter Systems

  • This is a bundle package containing both the Motivx Tools cartridge style oil filter wrench and oil filter drain tool for Toyota and Lexus vehicles..
  • Included are the Motivx Tools MX2320 oil filter wrench and MX2341 oil filter drain tool. These tools are for use on 2.0L - 5.7L engines that use the new cartridge style oil filter system. They do not work on standard spin-off style oil filters..
  • Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • Includes a Toyota oil filter wrench for removing the oil filter housing cap and a oil filter drain tool for draining the filter housing before removing..
Check Stock

THIKPO 3/8 inch 64mm 14 Flute Oil Filter Wrench for 2.5-5.7L Engines with Toyota's Cartridge Style Oil Filter System, Oil Filter Cap Removal Socket Tool for Toyota, Lexus, Scion

  • This 3/8" 64mm 14 flute Toyota oil filter cap removal tool is made of premimum 6065 aluminum alloy, which make it tough enough to provide great power to rotate and replace the extremely tight original oil filter cap..
  • Surface of the oil filter wrench is treated with a high quality black anodized finish to prevent corrosion. It greatly increases friction and durability of the tool, and will highly extend the serves life..
  • This THIKPO oil filter wrench is used for vehicles that use 15620-31060, 15620-36010, 15620-36020 oil filter housing cap and 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 Toyota oil filter system, including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t..
  • The oil filter cap removal tool perfect fit most of vehicles equipped with 2.5L to 5.7L engines, such as Toyota, Lexus , Scion RAV4, Camry, Tundra, Highlander, Sienna, 4Runner, Avalon, Tacoma, IS250, RX350and others which use Toyota's cartridge style oil filter system..
  • WARRANTY from THIKPO - This is NOT a genuine part, it's a aftermarket replacement part. Please feel free to contact us if you have any questions about our products or serves, we will try the best to help you..
Check Stock

Oil Filter Drain Tool Oil Filter Release Hose Tube Pipe Fit for Toyota, Lexus, Scion 2.0L - 5.7L Engines with Cartridge Style Oil Filter System

  • PREMIUM QUALITY: This tool made of high quality heavy brass and include one 39 Inch PVC hose. Allows you to direct the oil into your oil disposal container, help you cut down on the mess even further. Fits Toyota Filter Housing Part# 15620-36020 & 15620-36010..
  • INSTRUCTIONS：you simply remove the drain plug of the oil filter housing and screw in the tool in the closed position, and then turn the wheel to the open the valve to let the oil drain out. When the oil finishes draining, turn the wheel again to close the valve, remove the tool, and then proceed to remove the oil filter housing as normal..
  • FEATURES ADN ADVANTAGES：changing the cartridge type Toyota oil filters is messy compared to their old spin on oil filters. After using this tool to empty the oil filter housing, the job of changing the oil filter cartridge is a lot neater ..
  • FITS THE FOLLOWING VEHICLE MODELS: Fit for Toyota, Lexus, Scion 2.0L - 5.7L Engines with cartridge style oil filter system. If you are not sure whether the oil filterdrain tool will fit, please contact us before purchasing..
  • WHAT YOU'LL GET: 1x Engine Oil Drain Hose, Place order with 100% confidence, we provide 1 click refund for our valued customers in 3month. Please feel free to contact us if you have any questions and....
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota

  • Fitment – The Universal Cam Pulley Holder works on many Camry, Toyota, Nissan, Mazda, OHC and many others. The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ..
  • Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines..
  • Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt..
  • SUPERIOR QUALITY – Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..
Check Stock

OBD2 Diagnostic Scan Tool 1.5M Mini Cable Diagnostic Tool Cable Scanner for Toyota TIS Lexus Techstream

  • 【Support versions】 The VCI diagnostic tool  cable support all versions of OEM Toyota TIS Techstream softwares including the Latest v13.00.022 !.
  • 【Multifunction】 This code reader Toyota support Double K-Line.
  • Detects battery voltage and contact via by control line.
  • 【High performance and reliability】 The VCI OBD2 diagnostic scan tool cable is high performance and reliability. It is not only with ARM cpu inside....
  • 【Suitable Protocols】 KWP 2000 ISO 14230-4.
  • 【PC Requirements】 The VCI cable works on 32 bit of windows XP & windows7 and only 1 GB of free HDD space..
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock