Reviews Tourist Hotspot

Verizon Jetpack Hotspot WiFi Device - 4G LTE MiFi 8800L | Mobile Hotspot Device Portable WiFi Hotspot | Hot Spots for WiFi with Case, Screen Protector, Additional Battery | Mobile WiFi Hotspot

  • Hotspot WiFi devices portable with a case, screen protector, and additional battery have a 2.4 inches Touch Screen display, 4400 mAh battery. This hot spot MiFi device will work 24 hours of typical usage.
  • You can use Verizon Jetpack MiFi 8800L mobile hotspot device unlimited data. Connect up to 15 WiFi hotspot devices. Mobile hotspot device connect in 2.4GHz or 5GHz bands simultaneously.
  • Portable WiFi device Verizon jetpack MiFi hotspot 8800L, the first CAT 18 LTE Mobile Hotspot with 2, 3, and 4 carriers CA and LAA technologies. Wireless router with Type C USB and Dual TS9.
  • WiFi hotspot help connect to mobile internet in remote areas. MiFi 8800L portable WiFi device support all popular mobile carriers worldwide. 5G Hotspot device work WLAN 802.11 a/b/g/n/ac, dual-band.
  • Boost mobile hotspot device secure all your mobile internet data from hackers, encryption, and VPN pass-through. MiFi hotspot Global 4G LTE Category: 18 (DL) / 13 (UL).
Check Stock

CASEMATIX 4G WiFi Hotspot Carrying Case Compatible with Verizon Jetpack MiFi 8800L 4G Mobile Hotspot, Netgear Unite 4G LTE Mobile WiFi Hotspot and More, Case Only

  • CASEMATIX 4G Mobile Hotspot Pouch: This hard shell case for 4G mobile router hotspots features a water-resistant exterior and a waterproof zipper to protect your 4G hotspot device and accessories during travel..
  • Wide 4G Hotspot Compatibility: This CASEMATIX WiFi Hotspot Travel Case can accommodate hotspot units with dimensions up to 4.75" x 3" x 1.5" along with charging cables, data cables, and other compact accessories you want to pack alongside it..
  • Premium Protection for your Hotspot: This case's interior features non-scratch materials that will keep your hotspot unit looking pristine. Also has padded foam insert and middle divider to separate your charger, unit and cables in the travel case..
  • Compact, Portable Design: The mobile hotspot case by CASEMATIX measures only 5.5" x 3.75" x 2.5" and comes with a clip-on neck lanyard and carabiner to carry your hot spot device anywhere, along with a zippered accessory pouch for cable storage..
  • Travel Case Only: Includes CASEMATIX premium mobile router travel case, does not include WiFI hot spot device..
Check Stock

4G LTE Dual TS9 External Antenna 7dBi Magnetic Base for Netgear Nighthawk M1 MR1100 Verizon Jetpack 8800L Mobile Hotpots Router MiFi Mobile AT&T T-Mobile Sprint Hotspot 4G LTE Router, Eifagur

  • Travel router case for netgear router: For nighthawk router case is designed for nighthawk 5g mobile for hotspot 5g router case is compatible with NETGEAR for Nighthawk M5 Mobile for Hotspot Router (MR5200), and for Nighthawk M1 M2 MR5100/ MR 2100/ MR1100/ M6Pro(MR6500)/ M6(MR6100) Mobile Router. Portable wifi holder keeps your precious hot spots for wifi router and accessories organizer and protected from drops. (Mobile for hotspot router case only, 5g wireless router not included).
  • For Hotspot wifi devices portable bag rugged and durable: For netgear for hotspot case is made of high-quality EVA material, which is splash-proof, shock-proof and scratch-proof, protects wifi 6 router organizer from damage caused by accidental collisions and scratches during transportation and friction, and ensures that when going out When 5g modem case is safe, for hotspot devices 5g router box prolongs the service life for nighthawk 5g..
  • Compact for att for hotspot router case: Internet router bag is equipped with elastic straps to fix routers for wireless internet, prevent your portable wifi device from accidentally falling, and keep for netgear for nighthawk m1 in good condition when traveling or outdoors. Mesh pocket with zipper can store 5g wifi for hotspot rou....
Check Stock

Case Compatible with TP-Link AC750 Wireless Portable Nano Travel Router. for Hotspot WiFi Devices Storage Carrying Box Holder for Power Adapter, Ethernet Cable and Other Accessories (Bag Only)

  • Portable wifi router case fits for: For tp link router box is specially designed for TP-Link AC750 Wireless Portable Nano Travel Router (TL-WR902AC)-Support WiFi Router/ for Hotspot/ Bridge/ Range Extender/ Access Point/ Client Modes. Internet extender router case external dimensions: 5.51*3.38*1.77 inches. (Only wifi for hotspot router case, not including mobile for hotspot router).
  • Wifi for hotspot devices router holder with precise fixed groove: For tp link wifi extender router organizer case with two inner brackets inside the wireless bridge router bag are designed for the shape and size of the portable wifi for hotspot for travel and the power adapter. Wireless bridge router box can stabilize hot spots for wifi router and adapters to prevent them from falling. For muama ryoko portable wifi 4g router holder allows you to store portable Wi-Fi device more securely..
  • Wifi bridge router case with mesh pocket: There is a flexible mesh pocket inside the wireless router case. There is enough space to store the USB charging cable, WAN/LAN port cable, user manual and other accessories for hotspot router, so that all accessories are put together in an orderly manner to avoid loss/ damage and the flip will not close. The 360-degree hard and smooth zipper make....
Check Stock

GSParts Replacement Battery for Novatel MiFi Verizon Jetpack 7730L P/N 40123117 4400mAh

  • COMPATIBILITY--Compatible with Novatel Verizon Jetpack MiFi 8800L,7730L Mobile Hotspot P/N: 40123117.
  • UPGRADED BATTERY--This battery is made of new high quality Lithium-ion battery cell with CE, FCC, UL, PSE and ROHS certification.and built-in smart chip, which make sure your phone prevent over-heating, short-circuit, over-charging and over-discharging for safe and prolonged use..
  • LITHIUM-ION TECHNOLOGY--Lithium-Ion Technology for Enhanced Battery Life. Never leave Hotspot plugged in to charge for longer than 24 hours. Allow battery to drain and re-charge. Leaving Hotspot plugged into charger without allowing battery to drain, may affect performance of battery and/or ruin battery/device. Hotspot should never be left to charge in direct sun, or extreme temperatures (0F/-18C - 113F/45C)..
  • WARM TIPS--Leaving Hotspot plugged into charger without allowing battery to drain, may affect performance of battery and/or ruin battery/device. Never leave Hotspot plugged in to charge for longer than 24 hours. Actual usage time will vary based on user settings, feature use and network..
  • USER WARRANTY--Reply email within 24-hours,30 day refund, If you receive a defective battery or quality issues,please let us know,we will solve it as soon as possible..
Check Stock

Portable WiFi 150 Mbps 4G LTE Modem Mobile WiFi Hotspot Router Stick Support up to 10 WiFi Users for Travel Car Bus with WiFi Function

  • Portable Wifi --- Share up to 10 WiFi users on the Internet connection and enjoy sharing fun with family and friends.
  • Laptop Portable Wifi Hotspot --- Supports Micro SD memory expansion up to 32GB (not included).
  • Hotspot Wifi Devices --- as long as there is power, you can easily access the Internet, very convenient, not available for Windows 8.
  • Portable Hotspot --- Built-in 4G/3G+WiFi antenna for optimal coverage and reliability, increased signal strength, allowing you to enjoy reliable....
  • Portable Internet Hotspot --- Simply plug the adapter into your computer's USB port to connect wirelessly to the network or create a hotspot. With a....
Check Stock

Angry Birds Movie Mini Figure Multi Pack Set A 7 Piece

  • 13 Characters in all to collect, This set contains , Red, Stella, Bomb, Terence, Eagle , Tourist Pig & The Pilot Pig.
  • Red, Stella, Bomb, Terence, Eagle, Tourist Pig, Pilot Pig.
Check Stock

The Puerto Rico Channel

  • Funny photographer costume design as a cool vacation or holiday accessory. This "Fake Tourist Camera Graphic Fun Holiday Vacation Photographer" design is perfect for everyone who loves to make photos and bit of humor on an apparel..
  • This fake tourist camera with strap looking real or realistic makes a great gift for photography lovers..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

ZTE Mobley - Carrier Packaging (AT&T)

  • Get the ZTE Mobley, a mobile Hotspot Device that allows you to connect up to five Wi-Fi devices while on the road. No charging/charging cables required..
  • Your plug-in Wi-Fi Hotspot on wheels. Turns most vehicles 1996 and newer into a mobile Hotspot. Surf the Web, play games, watch movies, stream music, and much more on the road with the ZTE Mobley..
  • Just plug the Device into your vehicle obdii port and your Hotspot is Live. Services provided by AT&T mobility. Coverage and services Not available everywhere..
  • The nation’s strongest 4G LTE connection. Feel free to cruise from Coast to coast-your AT&T network connection will follow you almost anywhere.*** ***4g LTE Not available everywhere..
Check Stock

AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (OLED Board)

  • MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions).
  • AURSINC hotspot board supports Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model).
  • Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
  • If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat-12mhz.
  • Compatible with P4 settings:since our mmdvm board is defautly setup for Pi-Zero W, Pi 3. and if you do want to connect it with your Pi 4, you could try below methods. PICK ONE. Method 1: Remove the R1 resistance of the hotspot board(single/dual).
  • Method 2: Cut off the 2 Raspberry Pi pin headers on the corners of the board ( pick one to operate on your MMDVM board, refer to the product image for the R1 and 2 pin headers locations).
Check Stock