Reviews Touch Open Frame Module

1pcs 1-Bit AC 220V Optocoupler Isolation Module

  • Output TTL level can be detected with the microcontroller. The power supply can be 3-5V.
  • the PLC input terminal of the PLC COM power supply 24V input termination of the board signal output OUT, optocoupler board GND power negative.
  • When the power module in the power of the board after the white wire frame can not touch any device .. because it is high voltage. Note the safety of electricity.
Check Stock

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

  • On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
  • Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
  • (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
  • Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  • The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
  • With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Check Stock

Voswitch Overhead 8-Switch Pod/Panel with Control and Source Box Green Backlight Compatible with Jeep Wrangler JK JKU 2007-2018

  • Compatible with Jeep Wrangler 2007-2018 JK & JKU . Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at....
  • Diodes to protect sensitive accessories such as LED lights from "field collapse".
  • One touch switch and eight rocker switches,one touch on master switch to turn on/off the whole unit,long touch to dim the brightness of the backlight.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Waterproof power module box .Plug and Play. a grounding bus bar is needed for grounding your accessories if you don't want to use studs on the frame..
Check Stock

BCW 1-2CS-B 2 Card Screwdown Holder - Black Border

  • 【SUPER CLEAR ACRYLIC】Perfect choice to display and storage your rare cards. The clear acrylic card frame with double sided allow you to see the cards' details from every sides. It is an excellent cryistal clear card display frames for living room, badroom, office or any other place..
  • 【ONE-TOUCH-OPEN】One-Touch-Open design frame. No screws or screwdriver is needed to set up, only one step is required for assembling. It is more convenience to store and display cards. You can ruse and renew your cards collection at anytime..
  • 【HIGH QUALITY MATERIAL】The frame is totally made of acid-free, thickened and heavy acrylic blocks. With high definition and scratch resistance. Can keep your precious cards safe from water and dust. The crad frames come with anti-scratch protective film during delivery..
  • 【SPECAIL DESIGN】The clear cards frame is solid and stable in both portrait and landscape orientation. 6 magnets keep the 2 acrylic blocks together tightly and strongly. Can stands firmly on any countertop without any stands. The frame is neat and useful..
Check Stock

CARLO GAVAZZI EC3025TBAPL Capacitive Proximity Sensor, Triple-Shield Protection, M30, 25 mm Range, 20-250 VAC, NO or NC, 500 mA SCR Output, Diagnostic LED, 2 m PVC Cable, 6.3 oz. Size, 35 mm Height x 107 mm Width x 173 mm Diameter

  • HIGH RELIABILITY: This module is based on a touch detection IC ( TTP223 ) of capacitive type touch jog switch module. Stable touching detection of human body for replacing traditional direct switch key..
  • HIGH AVAILABILITY: A very useful addition for projects or applications where a conventional mechanical button or switch is not an ideal choice..
  • EASY TO INSTALL: The module can be installed in plastic, glass surface non-metallic materials. As long as the touch of the correct position, you can make hidden in the wall, desk and other places..
  • SMALL SIZE&LIGHT WEIGHT: Size: 15mm x 11mm .59"x 0.43" (LxW).
  • Package Included: 20x Capacitive Touch Switch Button Self-Lock Module..
Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

  • Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
  • 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
  • 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
  • Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
  • With Optical Coupling Isolation,Triggering More Reliable and Stable.
  • 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.
Check Stock

LCD Touch Panels Touchpanel Analog For DOGXL160 (EA TOUCH160-1)

  • ♛ The Display Module is 5V compatible, use with 3.3V or 5V logic.
  • ♛ The Display Module can support analog S P I and hardware S P I.
  • ♛ The Display Module is designed with one socket for sd card.
  • ♛ With P C B plate (including power supply IC, SD), compatible with 5110 interface.
  • ♛ This is a new 2.8 inch serial S P I color display module without touch function.
Check Stock

Westek Replacement Touch Lamp Control

  • Westek touch dimmer – this universal wire-in touch lamp control switch works in any touch light lamp and converts it to a 3-level touch control. Upgrade your existing touch control table lamp or use as a touch lamp switch replacement.
  • Mood lighting in your home – the dimmer module allows your touch lamps to have 3 levels, perfect for reading, watching movies or enjoying romantic dinners. This touch lamp dimmer plug helps create a calm atmosphere in your bedroom and other rooms in your house at night.
  • Easy installation – this compact light control module easily installs in the base of your lamp. Installation instructions for this lamp dimmer switch replacement kit are included with purchase.
  • Specifications – the touch lamp kit works with incandescent and halogen bulbs only. NOT COMPATIBLE WITH LED lights 300 Watts maximum. 120 V, 60Hz Remember – for use with indoor lamps only. Do not use with another dimmer or 3 way lamp kit in the same circuit.
  • Universal Replacement Unit easily installs in base of lamp.
  • For Incadescent and Halogen Bulbs, 300 Watts Max.
  • Includes pre-stripped leads, wire nuts and trilingual installation instructions.
Check Stock

Voswitch Overhead 8-Switch Pod/Panel with Control and Source Box Blue Backlight Compatible with Jeep Wrangler JK JKU 2007-2018

  • Compatible with Jeep Wrangler 2007-2018 JK & JKU . integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 11.0VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!.
  • Diodes to protect sensitive accessories such as LED lights from "field collapse".
  • One touch switch and eight rocker switches,one touch on master switch to turn on/off the whole unit,long touch to dim the brightness of the backlight.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Waterproof power module box .Plug and Play. a grounding bus bar is needed for grounding your accessories if you don't want to use studs on the frame..
Check Stock

Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board

  • This module uses genuine relays and normally open interfaces. High stability and low power consumption..
  • Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable..
  • Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away..
  • The package includes：2 pcs ESP8266 ESP-01S Relay module, relay WIFI smart socket (with ESP-01S).
  • We are very grateful for all customers’ opinions to improve sales, if you are not satisfied, please contact us to find the best solution.
Check Stock