Reviews Totalboat Paint
Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)
- ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
- for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
- COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
- apply a second coat only if a higher build is needed.
- to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
- EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
- boat primer is chromate-free and lead-free.
- DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
- marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
- AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
- do not apply Topside Primer thicker than recommended or it may not cure properly.
Check StockTotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas, White, 1 Quart (Pack of 1)
- ...roblems before they become costly damage, or find items accidentally dropped into the bilge.
- both colors offer excellent coverage and hide.
- EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
- prime prepared metals with TotalBoat TotalProtect.
- for fiberglass prime with TotalProtect if desired.
- for wood use TotalBoat Topside Primer if desired.
- EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
- CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
- THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.
Check StockTotalBoat Spartan Boat Bottom Paint | Multi-Season Marine Antifouling (Blue, Quart)
- MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
- SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
- advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
- HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
- ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
- EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
- Spray application - TotalBoat Spray Thinner 101.
- AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
- Black and Blue are also available in Quarts.
- NOTE: This paint has no maximum dry time before launching your boat is required.
Check StockTotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Black, Gallon)
- ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
- copper biocide keeps barnacles and mussels from clinging to hull bottoms.
- ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
- EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
- durable finish withstands trailering & beaching better than traditional ablative paints.
- FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
- because the ablative coating wears away during the season, there’s no paint buildup, which makes your bottom paint job easier next season.
- EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller – TotalBoat Special Brushing Thinner 100.
- spray equipment – TotalBoat Spray Thinner 101.
- AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
- this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check StockTotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Red, Gallon)
- ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
- copper biocide keeps barnacles and mussels from clinging to hull bottoms.
- ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
- EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
- durable finish withstands trailering & beaching better than traditional ablative paints.
- FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
- because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season.
- EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100.
- spray equipment - TotalBoat Spray Thinner 101.
- AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
- this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check StockTotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Blue, Gallon)
- ... during the season, there's no paint buildup, which makes your bottom paint job easier next season.
- EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100.
- spray equipment - TotalBoat Spray Thinner 101.
- AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
- this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check StockInterlux YBA068A/16 Trilux 33 Aerosol Antifouling Paint - White, 16 oz.
- HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
- COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
- copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
- FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
- haul and relaunch without losing the effectiveness of the biocide.
- EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
- for rolling, use a 3/16” nap or foam solvent-safe roller cover.
- if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
- AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
- after applying, there’s no maximum dry time before launch.
Check StockTotalBoat Spartan Antifouling Bottom Paint for Boats - Multi-Season Protection for Fiberglass Wood and Steel Black Gallon
- MARINE BOTTOM PAINT FOR MULTI-SEASON PROTECTION IN HIGH FOULING CONDITIONS: High copper content (38% cuprous oxide) for maximum antifouling protection against barnacles & slime for sailboats & power boats in fresh, salt and brackish waters.
- SMOOTH, ABRASION-RESISTANT FINISH FOR MAXIMUM PERFORMANCE: Offers maximum speed and fuel efficiency.
- advanced copolymer ablative formula offers continuous antifouling protection whether the boat is at anchor or underway.
- HAUL AND RELAUNCH WITHOUT REPAINTING: Hauled your boat for longer than 2 weeks? Simply scuff lightly to reactivate this paint's antifouling properties.
- ablative formula reduces paint buildup, which means no heavy sanding next time you apply bottom paint.
- EASY TO APPLY, DRIES FAST: Apply by brushing, rolling or spraying on fiberglass, wood, steel and previously painted surfaces in good conditions. THINNING: Brush/roller application - TotalBoat Special Brushing Thinner 100.
- Spray application - TotalBoat Spray Thinner 101.
- AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Gallon size.
- Black and Blue are also available in Quarts.
- NOTE: This paint has no maximum dry time before launching your boat is required.
Check StockTotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Black, Gallon)
- HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
- COPPER FREE FORMULA won’t cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
- copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
- FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
- haul and relaunch without losing the effectiveness of the biocide.
- EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
- for rolling, use a 3/16” nap or foam solvent-safe roller cover.
- if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
- AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
- after applying, there’s no maximum dry time before launch.
Check StockTotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | for Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Black, Quart)
- HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
- COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
- copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
- FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
- haul and relaunch without losing the effectiveness of the biocide.
- EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
- for rolling, use a 3/16” nap or foam solvent-safe roller cover.
- if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
- AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
- after applying, there’s no maximum dry time before launch.
Check Stock