Reviews Torco Industrial Gear Oil

SMOTIVEPRO Engine Oil Extractor Pump Brake Fluid Extraction Syringe Vacuum Filling and Extracting Pump Capacity 500CC

  • SUPERIOR MATERIALS:The Syringe oil extractor pump made of high quality, solid, durable material, Built-in dual rubber pads, fit the piston closely to avoids leakage,Thicken wall enhances high strength and provides long service life..
  • Extra tubes and Different Capacity for Choice: Extra tubes make extra length for jobs in hard to reach places and won't have to worry about spillage during use. Different Size Brake fluid extractors provide best Choice on the Capacity:0.5Liter/1.5Liter.
  • Extraction and Infusion of Liquid: Simple syringe-type action using the manual fluid pump can dual-way extract and fill fluid by differential extractor dispenser quickly and easily. Ideal for emptying or filling up the master tank and other reservoirs, extracting brake fluid from the tank and adding new oil before flushing the brake fluid to the brake caliper..
  • Widely Application: Ideal for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's, etc. Applicable to engine oil, gear oil, gearbox oil, including chemical resistant oils,brake fluid, diesel fuel, coolants, hydraulic systems and water, etc..
Check Stock

Johnsen's 5594 Hydraulic Jack Oil - 32 oz.

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • HYDRAULIC & JACK OIL: Our formula is a medium weight hydraulic oil blended of a high quality paraffinic base oil with anti-rust, anti-oxidation, anti-foam, anti-wear, and seal swell additives..
  • FORMULATION: This oil is a 20W, non-detergent oil that is compatible with all hydraulic fluids, and protects all parts in hydraulic jacks over a wide temperature range..
  • APPLICATIONS: Our hydraulic oil can be used for hydraulic systems and fluid drive units, and added to existing fluids. However, it is not suggested for use in hydraulic brakes..
  • PRODUCT SPECIFICATIONS: Available in a 32 fl. oz. or 1 qt bottle, and is made in the USA..
Check Stock

8MILELAKE 9L Vacuum Hand Operated Engine Oil Changer Fluid Extractor Evacuator Pump Tank

  • Suction Probes: Ø4, Ø6, Ø8, Ø10,and 1pc of Ø4 brass probe) probe length 1M.
  • Use to evacuate automotive fluids:engine and gear oil, transmission fluid, brake fluid, coolant.
  • This oil changer pump is ideal for other liquids such as water and soluble oil,for Use With Most Vehicles and Machines.
  • 9 ltr Capacity device constructed from composite materials and suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery..
Check Stock

Ski-Doo OEM Chaincase XPS Synthetic Oil/Lube/Lubricant Chain/Gear Case Fluid 12oz 293600138

  • GEAR LUBRICANT: GL-4 Multi-Purpose Gear Oil has low pour points and high temp properties to provide lubrication over a wide temp range. Our formula contains anti-rust and anti-wear EP additives to provide corrosion protection in drives and hypoid gears..
  • MULTI-PURPOSE: Our formula is not corrosive to copper.
  • or other non-ferrous alloy bearings and bushings..
  • APPLICATIONS: This multi-purpose oil is suitable in use for auto.
  • and differentials requiring API/GL-3 and GL-4 oils. Safe for use on yellow metals..
  • PRODUCT SPECIFICATIONS: This product is available in a 1 gallon bottle..
  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain.
  • household tools and electrical equipment..
Check Stock

Sta-Lube Air Tool Oil SL2533-1 Gallon, Anti-Corrosive Lubricant for Pneumatic Equipment & Tools

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • PNEUMATIC TOOL OIL: This oil is recommended for lubricating pneumatic equipment and tools like impact wrenches, air ratchets, sanders, grinders, air motors, hammers, and drills. .
  • INCREASES TOOLS LIFESPAN: Our anti-corrosive tool oil contains solvents that break down deposits, while the oil lubricates the tool. Preventing rust and corrosion results in an extended lifespan of the tools. .
  • ENHANCES PERFORMANCE: Specially formulated with rust inhibitors, our Sta-Lube Air Tool Oil maximizes your tool's performance. .
  • PRODUCT SPECIFICATIONS: Sta-Lube Air Tool Oil Lubricant is available in a 1 gallon or 3.785 L bottle, and is made in the USA..
Check Stock

Fluid Extractor 200CC Oil Pump Automotive Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer Oil Extractor 7Oz

  • [LONG SERVICE LIFE] VICRING Oil Extractor syringe is made of high-quality plastic materials, with 200cc capacity, strong and durable, high strength, and long service life..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [USE WITH VARIETY FLUIDS] VICRING oil fluid extractor is suitable for power steering, coolant, oil changes, rear axle rear grease changes, and even for transferring high-viscosity fluid. Also for use with durable, oil and chemical-resistant oils, coolants, and hydraulic systems..
  • [WIDE APPLICATION] Great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for use on vehicles and machinery brake master cylinders, oil filter housings, differentials and gearboxes..
  • [FUNCTION] VICRING Oil Extractor is designed to drain or top up the master cylinder and other fluid reservoirs, draw brake fluid from the fluid reservoir, and add new brake fluid before flushing the fluid at the caliper..
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • ...ide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut-off valve for mess-free extraction. More importantly, the fluid extractor's lid is removable to allow for easy recycling of waste fluid..
Check Stock

LUMAX LX-1314 Gold/Silver Manual/Pneumatic 2-in-1 Fluid Extractor (2.6G 10L Capacity). Suitable for Brake Fluid, Engine Oil, Gear Oil, Transmission Fluid, Water, etc.

  • Ideal for Extracting or Changing Engine Oils or Lubricants in ATV’s, Boats, Farm Equipment, Industrial Gear Boxes, Motor Vehicles, Motor Bikes, RV’s, etc..
  • Excellent for use with Oil, Coolant and Hydraulic Systems Durable, Oil and Chemical-Resistant Polypropylene Construction.
  • Maximum Fluid Temperature: 176ºF (80ºC).
Check Stock

Lifan Power LF170F-BHQ 7 HP Horizontal Shaft Recoil Start Engine with 6 1 Gear Reduction

  • 7hp 212cc 4-Stroke OHV Industrial Grade Gas Engine.
  • 3/4 inch keyway shaft and Universal mounting bolt patterns.
  • Low oil shutdown engine protection and .95 gallon fuel tank.
  • Automotive grade rods, pistons, ring and crankshaft along with 3 year residential - 1 year commercial warranty.
Check Stock

Plews 55001 Lubrimatic Fluid Quart Pump, Fits Standard Quart Bottles

  • Ideal accessory for adding fluids to small engines, automotive transmissions and axles, farm equipment, and industrial equipment.
  • Fits quart sized bottles and containers with traditional sized necks as commonly used for motor oil, ATF, and gear lube – not for use with wide-mouth necks.
  • Rigid inlet tube won’t curl like flexible tubes ensuring a more complete fluid transfer.
  • 17 inch long, 3/8 inch diameter flexible outlet hose allows access to even hard to reach fill plugs and tubes.
Check Stock