Reviews Top Mount Camber Plates

Yonaka Compatible with Honda Accord 2013-2017 Spec 2 Full Coilovers Suspension Shocks Springs Struts

Compatible With Honda Civic (FA/FG) 2006 2007 2008 2009 2010 2011.
Spring Rate: Front - 8 kg/mm (448 lbs/inch) | Rear - 10 kg/mm (560 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | No, Reuse Factory Top Mount // Damping Levels: 32 Ways.
Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
Install By Experienced Professionals Recommended.

Measure Camber and Caster at the track or in your garage..
Camber measurements accurate to within 0.1 degrees..
Measures Caster WITHOUT the need for expensive turn plates..
Digital readout can be calibrated for non-level surfaces in a matter of seconds..

Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.

Fitment: Compatible with Acura Integra ( all model) 1990 -1993.
Compatible with Honda Civic / CRX ( Only fit Rear Forks Model) 1988 -1991. 【NOTE】:....
Camber plates / top mounts: adjustable & pillow ball design.
Please check your car information before purchase..
Installation Included, professional installation is highly recommended.

All-Mountain Style Snowboard Set – Lightweight Rig with a Medium Flex - Durable Gloss Finished Top-Sheet Paired with Rigid Snowboard Bindings made of Injection Molded Polyethylene.
Snowboard Shape -Twin Directional (Symmetric) Tip and Tail, Hybrid Profile (Camber Rocker Camber Profile) with Camber under foot and a rocker core (prevents edge catching and enhances pop), using the standard 2 x 4 Mounting System made with stainless steel inserts.
Sandwich Construct - White ABS Side Wall - Components: 100% Real Wood Core, ABS side wall, Rubber dampening strip, Steel edge side wall, Extruded base, Ridged Top & Bottom Sheet (scratch resistant).
STAUBER Dyna Snowboard Bindings - Light weight, Reinforced Precision Injection Molded Bindings, Adjustable High back, Taught Ankle Strap, Toe Cap strap, Aluminum alloy 6061 Buckling mechanism.
Includes 8 - 14mm Screws and 8 Countersunk Locking Washers, 2 Mounting Discs, and a FREE STAUBER Sticker.

Application: Compatible for 1992-2001 Honda Prelude. 【NOTE】: These Coilovers Strut will "Lowering your car" and DOES NOT keep to Original Ride Height..
45° Adjustable Camber plates / top mounts:Yes.
Please check your car information before purchase..
Professional installation is highly recommended.

Compatible With Toyota Corolla (E140) 2009 2010 2011 2012 2013.
Spring Rate: Front - 8 kg/mm (448 lbs/inch) | Rear - 5 kg/mm (280 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways.
Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
Install By Experienced Professionals Recommended.

All-Mountain Style Snowboard Set – Lightweight Rig with a Medium Flex – Durable Gloss Finished Top-Sheet Paired with Rigid Snowboard Bindings made of Injection Molded Polyethylene.
Snowboard Shape -Twin Directional (Symmetric) Tip and Tail, Hybrid Profile (Camber Rocker Camber Profile) with Camber under foot and a rocker core (prevents edge catching and enhances pop), using the standard 2 x 4 Mounting System made with stainless steel inserts.
Sandwich Construct – White ABS Side Wall – Components: 100% Real Wood Core, ABS side wall, Rubber dampening strip, Steel edge side wall, Extruded base, Ridged Top & Bottom Sheet (scratch resistant).
STAUBER Dyna Snowboard Bindings – Light weight, Reinforced Precision Injection Molded Bindings, Adjustable High back, Taught Ankle Strap, Toe Cap strap, Aluminum alloy 6061 Buckling mechanism.
Includes 8 – 14mm Screws and 8 Countersunk Locking Washers, 2 Mounting Discs, and a FREE STAUBER Sticker.