Reviews Tool To Turn Off Water Mains

YUEWO 5.8Gal/22Litres Stainless Steel Still Wine Making Kit Water Distiller Home Brewing Kit for DIY Whisky Wine Brandy Gin Vodka Alcohol (Produce 92% ABV)

  • Energy-saving & Ingeniously Simple Drive Mechanism - Connect up a garden hose to the normal domestic water supply and turn the tap on. The tap water expands the rubber diaphragm inside the press and presses the ground fruit against the mesh basket. The pressure and pressing time can be regulated by turning on the tap more or less..
  • Easier to Use - Simply grind fruit, grapes or berries and fill up the hydraulic press, turn the tap on and watch as the pressure of the incoming tap water compresses the ground material from the inside to the outside against the mesh basket.(Supplied with 1 pack filter bag and splash guard against splash water).
  • Multifunction Hydraulic Press - This Bladder presses are suitable for pressing juice from pre-shredded apples, grapes, red currants and many other fruits, vegetables and berries. It can also be used for pressing rhubarb, honeycomb, tomatoes, macerated tobacco or citrus fruit..
  • HIGH JUICE YIELD/LESS WASTE - The rapid pressing and the short flow distance preserve the vitamins.
  • the juice has a wonderfully fresh aroma. Due to the high pressure applied, you achieve an exceptionally high juice yield, even if the press basket is only partially filled..
  • Advantages:Much quicker than a traditional press/Easier to clean/Less oxid....
Check Stock

PROXXON Model Building and Engraving Set 38515 Green

  • Complete set with rotary tool MICROMOT 60/E, mains adapter and 34 bits and cutters.
  • The right choice for creative hobbyists and model makers.
  • With 6 high precision triple slit steel collets.
  • Accurate clamping of the bits for highest concentricity and the precision you need for finest work pieces.
  • Scope of delivery: 1x PROXXON Model Building and Engraving Set including rotary tool MICROMOT 60/E, mains adapter, 34 bits and cutters and 6 high....
Check Stock

Globeagle Electrolyzer Quick Water Quality Testing Electrolysis Iron Bars TDS Tester

  • Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self see the condition of your drinking water..
  • The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water..
  • Prepare two transparent cups of water (100 to 150 ml ) one cup holds tap water, the other cup holds RO water..
  • Put metal pillar into two cups, turn ON and begin the test, After 30 to 60 seconds, turn it off and remove the water electrolyzer..
Check Stock

Awakingdemi WaterTDS Tester,Electrolyzer Quick Water Quality Testing Electrolysis Iron Bars TDS Tester

  • Very Easy to operate , quick testing, obvious results. simplest and cheapest way to test the water quality. buy your self & see the condition of your drinking water..
  • The electronic color tester is an effective sales tool that visually demonstrates the difference between high TDS water and low TDS water..
  • Prepare two transparent cups of water (100 to 150 ml ) one cup holds tap water, the other cup holds RO water..
  • Caution: Avoid the electric shock while using the devise.
  • Do not touch the rods once the precipitator is plugged into an electric outlet..
  • Put metal pillar into two cups, turn ON and begin the test, After 30 to 60 seconds, turn it off and remove the water electrolyzer..
Check Stock

Smart Dimmer Switch by Martin Jerry, Dimmer Switch for LED Lights, Single Pole, Compatible with Alexa as WiFi Light Switch Dimmer, Works with Google Home, No Hub, Need Neutral Wire

  • Dimmer Light Switch: Mains Dimming (TRIAC) ONLY. NOT support 0-10V, PWM, Dila, D-Max, Support INC bulb (400W), Dimmable LED Bulb (150W) and CFL bulb (150W).
  • Home Automation System: Compatible with Alexa and Google Home Voice Control (Smart Life Skill), Remote Control Anywhere (Smart Life App in iOS and Android), IFTTT, No Hub is required for Wi-Fi Dimmer Switch, , Schedule, Share Alexa Dimmer Switches for Family Members.
  • Installation Notice: Neutral Line is required, Single-Pole Use (Not Support 3-way), 2.4G Wi-Fi ONLY (Not Support 5G Wi Fi), Bubls support Mains Dimming (Send us your bulbs' model to check if you are not sure).
  • Advantage: Over Temperature Protection, Brightness Memory, Soft On & Soft Off Lighting for Comfortable Visual Effect, Physical Button & Better Responsiveness.
  • Warranty: Martin Jerry Promises 90-Day 100% refund, 1-year Quality Warranty for it’s Smart Home Devices on Amazon, like WiFi Smart Plug, Plugs, Smart Switch, Wall Switches, Smart Bulb, Smart LED Controller, Homekit smart plugs.
Check Stock

LUYS PTC Aquarium Heater (50W / 100W / 200W / 300W / 500W), with External Temperature Controller and LED Temperature Display for Fish Tank

  • Precise Temperature ControlLUYS aquarium heaters use unique temperature-control technology which can easily control the aquarium temperature to a preset temperature. The easy-to-read red LED temperature display shows the real-time water temperature on the large screen. When the fish tank heater starts to heat, the heating indicator lights turns red, and once it reaches the set temperature, it will turn blue. The temperature accuracy is +/-1 F..
  • Fast Heating Speed, 50%+ Energy SavingThe main material of the heating rod is PTC. Under the same conditions, the heating speed is 2-3 times that of the ordinary heating rod, and it can save 50% of electricity for you.At the same time, the heating rod has a temperature memory function, which automatically saves the set temperature after the power is turned off, and automatically heats to the set temperature after the mains power returns..
  • Safety Design Provides Double Protection for Your AquariumThis heater has overheating protection function and it can be auto shut off when out of water. When overheating (more than 93 Fahrenheit), it will automatically shut down, and it will automatically reset when it cools to the starting temperature (usually two degrees lower than the set temperature). When the water level ....
Check Stock

eOUTIL Brake Fluid Tester Pen, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • SAFE&USEFUL---The unit is Mini Pen Liquid Moisture Water Tester Tool. Check the health status of DOT3, DOT4, DOT5 car brake fluid, it will be safer for your driving..
  • 5 LED INDICATORS---5 LED to indicate percentage of water in the brake fluid with three colors green yellow and red. Even in the dark does not affect reading, make reading data easier..
  • EASY TO USE---The brake fluid tester is easy to use. Check the quality of brake fluid in car only takes seconds. Make it easier to operate for beginner. It's a must-have car tool for your car owners..
  • PORTABLE&DURABLE---Brake fluid tester pen is small compact size, easy to carry. Super strong ABS shell, has long service life..
  • AUTO TURN OFF---In order to save power, this test pen has the automatic shutdown function, it will automatically turn off the power 15 seconds after starting every time..
Check Stock

Baomain SSR-60DA 60A Solid State Relay Module 4-32VDC / 24-480VAC + Heat Sink

  • Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
  • Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
  • Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
  • This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
  • Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock