Reviews Tool Handle Cover

Raidenracing Chassis Dirt Dust Resist Guard Cover for 1/5 Traxxas 6S 8S X-Maxx

  • 【RC Tool Kit Upgrade Version】High-quality non-slip aluminum alloy handle with steel bottom cover, the drive head is made of high-speed steel and....
  • 【Rc Tools Dimensions】Total Length:170mm/6.8inch, Handle Length: 90mm/3.5inch, Handle Diameter: 18mm/0.7inch.
  • 【Clear Design】Each RC car tool kit handle is marked with a clear size for easy identification and use.
  • 【Widely Applicable】Hex Screwdriver RC Tools Kit Set, Hex Screw used for disassembly of DJI Elf 3/4 general-purpose models, RC helicopter, RC....
  • 【What You Get】4 pcs hex screwdriver set (hex driver 1.5mm 2.0mm 2.5mm 3.0mm RC tool kit). If you or the product has any questions, please feel....
Check Stock

Testament Of Youth

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock

Xislet Belt Changing Removal Tools Kit Compatible with Polaris RZR 900 S 1000 XP Come with Clutch Cover Separate Tool Set Combo Package

  • The clutch tool for polaris rzr is a must-have for separating the cover screws, it's flexible so easy to get the cover screws in or out in that tight....
  • The RZR belt changing tool makes changing your belt easier, and speed up change belts, saving the time of Polaris RZR rider.
  • RZR clutch cover removal tool with a flexible shaft and no-slip grip, which can be used within 90 degrees bending range to work on the clutch screw....
  • Netted Anti Skid Design - This Belt changing tool has an ergonomic handle for a comfortable grip making it easy for RZR owners to change a belt.
  • Razor belt removal tool made of solid aluminum alloy CNC Machined - de-burring and polishing - accurate control every process by Xislet.
Check Stock

RZR Clutch Cover Removal Tool kemimoto RZR Removal Tool kit with Reversible Socket Compatible with Polaris RZR XP 1000/ XP Turbo RS1 Ranger XP 1000

  • 【Fitment】-Clutch removal tool only Compatible with 2016 2017 2018 2019 2020 Polaris RZR/RZR-4 XP Turbo & RS1, 2018 Polaris Ranger XP 1000 & 2019....
  • 【 Flexible shaft】-RZR removal tool with flexible shaft and no-slip grip,which can be used within 90 degree bending range. The clutch cover removal....
  • 【Reversible】-kemimoto RZR clutch cover removal tool with a reversible socket that fits 8 mm clutch cover screw heads and 1/4" hose clamp. The....
  • 【Comfortable to use】-This clutch removal tool handle is designed according to ergonomic principles. Ensure the comfort of your hands during the....
  • 【Durable】-Removal tool of RZR is made of aluminum alloy, which is lighter and will not rust compared to other tools made of steel, and can be used....
Check Stock

RZR Belt Changing Tool Compatible with Polaris XP/RZR XP4 1000/RZR S 900 with Clutch Cover Removal Tool Kit

  • ⁂ Fit for⁂ -- This rzr belt removal tool is custom made Compatible with Polaris XP/RZR XP4 1000/RZR S 900 etc almost all rzr belts.
  • ⁂The clutch tool⁂ -- It is a must-have for separating the cover screws, it's flexible so easy to get the cover screws in or out in that tight area.
  • ⁂The RZR belt changing tool⁂ -- Makes changing your belt easier, and speed up change belts, save the time of RZR rider.
  • ⁂Durable to use⁂ -- Belt changing tool made by Solid Aluminum Alloy, de-burring and polishing, accurate control every process. The clutch tool is....
  • ⁂Easy to use⁂ -- the belt changing tool is with an ergonomic handle for a comfortable grip, it’s very easy to changing the belt. It can be....
Check Stock

Vikky 5 inch cordless angle grinder, brushless 20V 4.2 lithium-ion cordless grinder, grinding wheel with a diameter of 125 mm, for cutting and grinding

  • Powerful, high-quality brushless motor for extended runtime and durability: The grinder includes a powerful brushless motor designed with 0-8500 no-load RPM to handle the toughest cutting and grinding jobs. The BL brushless motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life..
  • Ergonomic design: Cordless and weighs only 1.7 kg. The tool has a side handle with 2 positions for vibration control, for comfortable control, smoother grinding and to reduce operator fatigue. Ideal for metal workers, vehicle builders, plumbers and even women can easily use it..
  • The angle grinder is a member of the Vikky family, where the battery can be used in all devices in the system series. The 4.2 Ah battery and more powerful batteries in the series deliver optimal results..
  • Safe to use: The user-friendly functions include an extra-large paddle switch and a vibration-damping auxiliary handle for convenient operation and a lock and switch-off function for continuous operation, a burst protection and an adjustable protective shield for the safety of the user, a quick-change wheel release that controls the Tool-free removal of the wheel and restart protection to avoid accidental start-up..
Check Stock

TCRC 4PCS Aluminum 1.9 High Mass RC Beadlock Wheel Hubs for 1/10 RC Crawler Car TRAXXAS TRX4 TRX6 Axial SCX10 Tamiya CC01 Blue

  • 【RC Tool Kit Upgrade Version】High-quality non-slip aluminum alloy handle with steel bottom cover, the drive head is made of high-speed steel and....
  • 【Rc Tools Dimensions】Total Length:170mm/6.8inch, Handle Length: 90mm/3.5inch, Handle Diameter: 18mm/0.7inch.
  • 【Clear Design】Each RC car tool kit handle is marked with a clear size for easy identification and use.
  • 【Widely Applicable】Hex Screwdriver RC Tools Kit Set, Hex Screw used for disassembly of DJI Elf 3/4 general-purpose models, RC helicopter, RC....
  • 【What You Get】4 pcs hex screwdriver set (hex driver 1.5mm 2.0mm 2.5mm 3.0mm RC tool kit). If you or the product has any questions, please feel....
Check Stock

MELOTOUGH Wheeled Rolling Tool Backpack Heavy Duty Tradesman Pro Tool Organizer Including Laptop Sleeve (Red&Black)

  • ... 【Rolling Tool Bag】Tool Backpack with Convenient Design. High-density PP unidirectional wheels. Special back design, turn down the back cushion to cover the wheels to keep clothes clean..
  • 【Thoughtful details Roller Tool Bag】Light weight handlebar and wheeled.
  • Padded Tool backpack straps store away when case is wheeled.
  • Padded Back Support and Shoulder straps with adjustable chest strap to provide easy transport of your tools. When you go stairs , you can handle the durable /padded handle.
  • ️【Heavy Duty Wheel Tool Bag】Made by Constructed 600 denier polyester which is durable material thick makes this rolling tool bag a strong and durable way to store your most-used tools； MELOTOUGH QUALITY: ✅When you see a MeloTough product, you know that it is going to last. We make these wheeled tool bag for hard workers, dedicated people who need organizer your belongs in well ..
Check Stock

Cohesion Etched Zester & Grater Set of 2 - Kitchen Zester Tool for Lemon, Cheese, Garlic, Ginger, Nutmeg, Chocolate, Fruits, Vegetables - Sharp Premium Stainless Steel Blade with Protective Cover

  • ... knife sharpener, the finger joints sometimes inevitably rub the edge of the blade. We designed ABS plastic around the blade to avoid finger injury. The seamless connection between ABS plastic and the blade not only protects the fingers, also makes the cheese grater more stable and durable!.
  • Easy to Grip and Control Handle ✌ The handle of the Parmesan grater is made of silicone, non-toxic, odorless and non-slip. In addition, there is a non-slip silicone foot that adjusts the angle of the zester tool and keeps the zester more stable when grating the lemon. Without much effort, Parmesan and lemon will be perfectly ground!.
  • Protective Cover Creative Design ✌ The lemon zester come with a curved protective case made of ABS. Its protects the zester well. You can also avoid finger abrasions when you take the zester grater out of the drawer. Insert the cover back into the opposite direction of the blade and the cover can be converted into a storage box. Convenient for collect while grating the chocolate or ginger garlic, etc..
  • Easy to Clean & Hangable Design ✌ Raniaco fine grater is made of high quality stainless steel. Sharp and not easy to rust. Just rinse under the water stream. The handle of the kitchen tool has holes that can be hung to dry. Dishwash....
Check Stock

FLKQC 13 Piece Watch Press Set | Watch Back Press Watch Back Case Closer Include 12 Dies with Metal Inserts

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock