Reviews Toggle Bolt Screws

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock

Toggle Bolt HSCGIN 24PCS M4 Stainless Steel Toggle Bolt and Wing Nut Kit Round Head Butterfly Drywall Anchor Toggle Wing Nut Bolt

  • Toggle Bolt and Wing Nut Kit. Color: Silver. Material: Stainless Steel..
  • Sturdy and well-made: high quality stainless steel anchors, environmentally friendly materials. Stainless steel can be used in wet environments and will last for a long time. We offer great toggle bolt kits..
  • How to apply this kit: First, you'll need to drill a hole (large enough to go through the folded spring wings), then thread these toggle bolts through the hole. At this point the wings are released and clamped inside, then the bolts are pulled down to tighten, taking care to leave enough room for the wings to loosen. Finally, it is best to use an electric screwdriver to screw in the screws..
  • Wide compatibility: widely used in hollow substrates such as hollow brick, gypsum board, fiber cement board, wood board, etc., suitable for installing lamps, curtain rods, photo frames, coat racks, power switches and other lamps..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

TCH Hardware 10 Pack Toggle Bolt 3/16' x 2' + 4' Slotted Drive Screws - Drywall Sheet Rock Anchor Hollow Wall Butterfly Spring Loaded Wing

  • Steel slotted drive machine screw - 10-24 x 4".
  • Perfect for mounting on drywall and hollow walls.
  • Wings lock into place behind wall for superior holding power..
Check Stock

Bonost 48 Pcs Toggle Bolts - 1/4 3/16 1/8 Inch Butterfly Toggle Anchors for Drywall - Toggle Bolt Assortment Kit with Matching Wing Nuts Hex Nuts Washers

  • 【What You Get】: 48pcs toggle bolts and wing nut kit, including 1/4-inch: 12pcs, 3/16-inch: 16pcs, 1/8-inch: 20pcs. We also provide matching hex nuts and washers, making it easier for you to hang mirrors or pictures..
  • 【High-quality Material】: Made of premium carbon steel, these toggle bolts for drywall are corrosion resistant, durable enough to meet different occasions. Zinc coatings make the toggle bolts have a longer service time..
  • 【Easy to Install】: 1. Drill a hole required for installation.
  • 3. Place wing unit on toggle bolt. Thread the bolt to a depth of about four or five threads.
  • 4. Install your toggle bolt and then tighten the fastener clockwise..
  • 【Wide Applications】: Butterfly anchors for drywall have spring-loaded wings that open inside the hollow wall, dispersing the weight of the secured item over a larger area. Widely used in hollow block, gypsum wallboard and more..
  • 【Durable & Sturdy Case】: Comes with no-mix compartments and carrying handle, the case is easy to carry and store toggle anchors. Made of durable construction and heavy duty material, the case offers long-lasting usage..
Check Stock

Simpson Strong-Tie FT18250C25 3/16\FlipToggle Anchor with 2-1/2\ Bolt, 25ct

  • ...ronment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using..
  • 【INSTALLATION】--- First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【PACKAGE】--- All of toggle bolts and wing nuts are packed in a durable and sturdy Box to efficiently bear the weight of the whole package. In order to avoid the screws being scattered or lost during use, we specially package for each different type of screws for your convenience and storage. Not only give you the best product, but also the best storage system for them..
  • 【WIDE APPLICATIONS】--- Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, what’s more, the product is highly adaptable, it can be installed qui....
Check Stock

6 Pack Toggle Latch Clamp 4001 Adjustable Toggle Clamp Latch Smoker Latch Clamps Heavy Duty Toggle Latches 330Lbs Holding Capacity Pull Latch Clamp for Smoker Lid Jig Tool Box Case 24PCS Screws

  • EASY TO INSTALL & ADJUSTABLE DESIGN: Vicuna R toggle latch clamp are easy to install, just fix them with screws. The installation distance is adjustable, the maximum overall length is 4-1/8”, and the lock-up range is from 3-1/2 to 4-1/8 inches long. Use them to keep two halves closed tightly or loosely as you like. Just adjust the bolt and you will get the maximum tightness..
  • MORE STURDY & ANTI-RUST: Vicuna R toggle clamp latch is made of premium metal plating zinc for corrosion resistance, and anti-rust. Works well for different temperature environments, indoor or outdoor. A soft plastic-covered handle makes you more secure and comfortable when using..
  • STRONGER HOLDING POWER: Vicuna R heavy duty toggle latches are made of the highest quality metal materials and advanced technology, and enough strength to hold 330lbs(150kg). Stronger than most 4001 latch in the market. Each clip holds amazing tension until it is released, perfectly suited to your different needs..
  • WIDELY USED: Vicuna R adjustable toggle latch perfectly fits the freezer door, cabinet doors, garbage cans, table leaf, storage box, tool boxes, cases, smoker lid, sliding doors, trailer tailgates, etc. Our clamps are a great helper for you in making jigs, tool fixtures, work fixing,....
Check Stock

TOGGLER SNAPTOGGLE BCS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8\ to 2-1/2\ Grip Range, For 3/8\-16 UNC Fastener Size (Pack of 25)

  • Practical Kit: Zinc plated steel round head is used for hanging and fixing heavy objects. It is easy to use and bring more convenience to your life.
  • Premium Material: This toggle bolt and wing nut kit is made of high quality zinc plated steel which is strong and sturdy and offers good corrosion resistance and rust resistance in bad environment like high temperature, cold weather, and high humidity areas.
  • Wide compatibility: Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches.
  • Three Sizes: We have prepared 3 sizes of toggle bolt and wing nut kit, a complete kit, for you to meet different needs in your daily life.
  • What You Get: 1/8inch: 8pcs, 3/16inch: 8pcs, 1/4inch: 8Pcs, Lenink butterfly screws anchor drywall provide you with a more convenient driling way. Please feel free to contact us if you have any problem.
Check Stock

6 Pieces Ceiling Hooks Heavy Duty Swag Hook Hanging Plants Chandeliers Wind Chimes Ornament Hooks for Home Office Kitchen White Large

  • Durable Material: These heavy duty swag hooks and hardware are made of metal, durable and sturdy, can be used for a long time..
  • Sizes: Swag ceiling hook: 5.5 x 3.7cm/2.17'' x 1.45'', pointed screw: 3.6cm/1.4'', long bolt: 6.8 cm/2.68'', spring toggle wings: 5cm/1.97''..
  • Different Installation: Based on your needs, pointed screws are for installation on solid walls, long bolts and toggle wings are for plaster and....
  • Applications: The White ceiling hook is ideal for hanging plants, light fixtures, birdcage, fruit basket, wind chimes, bed netting, sheer curtains and....
  • Package: Comes with 2 sets metal ceiling hooks (4 different hardware make 1 set), meet your needs for home use. (Notice: contains functional sharp....
Check Stock

Cable Matters 10-Pack Single-Gang Toggle Switch Wall Plate (Wall Switch Cover) in White

  • 1 gang toggle switch wall plate cover provides a new or replacement toggle switch cover in the home or office.
  • Single light switch toggle wall plate provides a professional-looking installation.
  • Contemporary design of this toggle faceplate cover provides a clean look for an upgrade in the kitchen, dining room, or living room.
  • Smooth finish on the wallplates is easy to clean and includes matching painted screws.
  • Sturdy single gang toggle light switch plate covers fit a standard-sized single-gang receptacle.
  • Toggle light switch cover installs easily with the included mounting screws.
  • Cost effective 10 pack of light plate covers which provides enough faceplate covers for a small renovation project at home or work.
  • Toggle switch compatible to pair with a single pole toggle light switch in a standard-sized outlet box.
Check Stock