Reviews Tinned Nameko

NANSH Automotive Engine Grounding Braided Flat Tinned Copper Straps 1/2\ width (12\ length 1PC)

  • Material : Tinned Copper ( C11000 ) ,Length : 12 inches (300MM),Terminal Lugs : 6-8,.
  • General purpose Flat Tinned copper braids,Recommended by EMC/EMI directives.
  • Electrolytic copper Cu-ETP according to standard EN13602,UL Listed (UL467) except BJ,EAC certificate,RoHS 2002/95/EC Compliant.
  • Copper purity of minimum 99.9%,Maximum resistivity of 0.017241 mm2/m at 20ºC,Bends very close to the contact area.
  • Tinned copper added corrosion resistance and maximum conductivity..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 80mmx120mm, Green Pack of 4

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 20mmx80mm, Black Pack of 5

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

ZIGPEO 16 AWG Silicone Wire 100FT, Extra Flexible 16 Gauge Stranded Copper Wire, High Temp 392℉ 600V - RC, Automotive, Battery | Tinned Copper Conductor - 50FT Red & 50FT Black Spools

  • 16 Gauge Silicone Wire 50FT Red & 50FT Black Spool, Super Low Impedance & Highly Efficient! 16 AWG Wire is made of premium tinned copper conductor & silicone rubber insulator. Voltage Rating: 600V, Outside diameter 3.0mm, Tolerance +/- 0.1mm.
  • Extra Flexible 16 AWG Wire - 252 strand 0.08mm tinned copper conductor (1.27mm2). The construction of conductor features 16AWG RC cable super flexible & soft..
  • Tinned Copper Conductor - Every copper strand are tinned, it can protect copper conductor from corrosion ! The patina will cause impedance highly increased once pure copper conductor has been oxidized..
  • High temp 200℃/392℉, Low temp -60℃ - The 16AWG Battery Cable with silicone insulator can help wire using extremely hot and cold environment..
  • ZIGPEO silicone wire are widely used for RC, Batteries, Meters, Instruments, Motor, Automotive, Model Planes/Cars/Ships, Lamps, LED, Jumper, Inverter, Household Appliances, Electric Heating Appliances and Digital Fields..
Check Stock

NANSH Automotive Universal Engine Grounding Braided Copper Straps Earth Bonding Straps (8 Inch 12 Inch 24 Inch) (Tinned Copper 1/2\ Width 12\ Length 4PCS)

  • Material : Bare Copper,Tinned Copper ( C11000 ) ,Length : 8"(203mm)12" (300mm),Terminal Eyelet : 6mm,8mm.
  • General purpose Flat Tinned copper braids,Recommended by EMC/EMI directives.
  • Electrolytic copper Cu-ETP according to standard EN13602,UL Listed (UL467) except BJ,EAC certificate,RoHS 2002/95/EC Compliant.
  • Copper purity of minimum 99.9%,Maximum resistivity of 0.017241 mm2/m at 20ºC,Bends very close to the contact area.
  • Tinned copper added corrosion resistance and maximum conductivity..
Check Stock

10 Gauge Marine Wire,30ft 10 AWG Duplex Marine Grade Wire Tinned Copper Oxygen-Free Insulated Red& Black Marine Electrical Wire for Boat/Marine/Automotive/RV/Camper/Trailer

  • High Quality:Our marine electrical wire is made of tinned copper to make sure good conductivity,Anti-corrosion, high durability,flexibility,stability for a long-lasting performance.
  • The marine grade duplex tinned copper wire is designed with a thick protective outer insulation coating makes it perfect for heavy-duty marine and other harsh external outdoor wiring projects.
  • Multi Use: the 10 gauge marine wire tinned use in pontoon boat/bass boat/boat trailer/ fish finder/truck/RV/Van/ATV trailer electrical system:wiring light (spotlight,underwater light,flood light, navigation lights,headlight), solar inverters, shore power,bilge pump,extend new bank charger leads, speaker wire,electric brake wires, radio stereo, alarm etc.
  • Up to standard of UL 1426 ,SAE, ABYC etc ,our heavy gauge marine wirecan perform the marine and other harsh environments of corrosion,open flame,extreme temperature fluctution,heat-shock,deformation, resist abrasion.
  • Marine grade wire Spec:white PVC jacket, red&black conductor sheaths, tinned & stranded true 10 AWG 10/2 flat copper wire,10 awg wire is insu....
Check Stock

18 Gauge Electrical Wire 3 Conductor, 32.8ft Black PVC Case Stranded Low Voltage LED Cable, 18 AWG 3pin Tinned Copper Hookup Wire, Flexible Extension Power Cord for LED Lamp Lighting Strips Automotive

  • 【Specification】18 Gauge 3 conductor wire(Red & Black & yellow). 32.8ft/10M. Maximum input voltage: 300V. Maximum current: 7.5A. Rated working temperature up to 80℃/176℉. Material:PVC+Tinned Copper..
  • 【High Conductivity】18 gauge electrical wire has 34 strands of tinned copper wire inside each cable. The high-precision oxygen-free copper contained in tinned copper has lower resistance and higher conductivity..
  • 【Durable Material】The extension cord has an even thickness PVC bush to protect the cord from fraying. It has the characteristics of flame retardant, safety and stability, anti-aging, acid and alkali resistance, moisture resistance and so on. The copper core have a high melting point and is not easy to melt..
  • 【Easy to Use】 Our 18AWG wire has the characteristics of high conductivity, low resistance, soft, and can be twisted and extended at will. Easy to peel and cut. Tinned copper wire is easy to solder and suitable for low voltage (5V-12V-24V) installations..
  • 【Wide range of uses】18/3 low-voltage cable extension cords are very suitable for LED monochrome light strips, electronic and electrical equipment, transformers, LED lights, LED splitter connections,automotive,speaker wire etc..
Check Stock

GearIT 16/2 Marine Wire (100 Feet) 16AWG Gauge - Tinned OFC Copper/Marine Grade Speaker Cable/Duplex / 2 Conductors - OFC Oxygen-Free Copper, White 100ft

  • MARINE TINNED COPPER WIRE (OFC) - Our GearIT Marine Speaker Wire made of tinned copper is designed to withstand harsh outdoor conditions, specifically for ocean or beach side properties and deep sea ocean adventures. We use thick gauge tinned copper wire to protect from salt and rusting due to high salt content on deep sea trips..
  • OCEAN SALT WATERPROOF - Our thick pvc jacket is waterproof and able to be used for salt water protection. Use for marine speakers, loudspeakers, or marine tower speakers for long lasting and durable waterproof speaker wire jackets..
  • THICK MARINE GAUGE WIRE - Tinned Wire 99.9% Oxygen Free Copper 2 Conductors (2C) with Red-Black internal cable color for easy polarity identification. External pvc jacket color is white cable lining. Insulation resists salt water, battery acid, oil, gasoline, heat, abrasion, and UV resistant radiation..
  • MARINE GRADE INSULATED CABLE - Perfect for radio, automotive, auto trailer, stereo, lighting, r/c under harsh outdoor conditions. UL Listed and CL3 Rated certification for marine wire install. Our pure copper marine cable can support up to 105 C (221 F) Dry and 75 C (167 F) Wet conditions.
  • FOR MARINE BOAT SPEAKERS, BOAT CABLE - Our GearIT boat wire cable comes in 25ft, 50ft, 100ft, 125ft, 150ft, 200f....
Check Stock

GearIT 12/2 Marine Wire (50 Feet) 12AWG Gauge - Tinned OFC Copper/Marine Grade Speaker Cable/Duplex / 2 Conductors - OFC Oxygen-Free Copper, White 50ft

  • MARINE TINNED COPPER WIRE (OFC) - Our GearIT Marine Speaker Wire made of tinned copper is designed to withstand harsh outdoor conditions, specifically for ocean or beach side properties and deep sea ocean adventures. We use thick gauge tinned copper wire to protect from salt and rusting due to high salt content on deep sea trips..
  • OCEAN SALT WATERPROOF - Our thick pvc jacket is waterproof and able to be used for salt water protection. Use for marine speakers, loudspeakers, or marine tower speakers for long lasting and durable waterproof speaker wire jackets..
  • THICK MARINE GAUGE WIRE - Tinned Wire 99.9% Oxygen Free Copper 2 Conductors (2C) with Red-Black internal cable color for easy polarity identification. External pvc jacket color is white cable lining. Insulation resists salt water, battery acid, oil, gasoline, heat, abrasion, and UV resistant radiation..
  • MARINE GRADE INSULATED CABLE - Perfect for radio, automotive, auto trailer, stereo, lighting, r/c under harsh outdoor conditions. UL Listed and CL3 Rated certification for marine wire install. Our pure copper marine cable can support up to 105 C (221 F) Dry and 75 C (167 F) Wet conditions.
  • FOR MARINE BOAT SPEAKERS, BOAT CABLE - Our GearIT boat wire cable comes in 25ft, 50ft, 100ft, 125ft, 150ft, 200f....
Check Stock

GearIT 10/2 Marine Wire (50 Feet) 10AWG Gauge - Tinned OFC Copper/Marine Grade Speaker Cable/Duplex / 2 Conductors - OFC Oxygen-Free Copper, White 50ft

  • MARINE TINNED COPPER WIRE (OFC) - Our GearIT Marine Speaker Wire made of tinned copper is designed to withstand harsh outdoor conditions, specifically for ocean or beach side properties and deep sea ocean adventures. We use thick gauge tinned copper wire to protect from salt and rusting due to high salt content on deep sea trips..
  • OCEAN SALT WATERPROOF - Our thick pvc jacket is waterproof and able to be used for salt water protection. Use for marine speakers, loudspeakers, or marine tower speakers for long lasting and durable waterproof speaker wire jackets..
  • THICK MARINE GAUGE WIRE - Tinned Wire 99.9% Oxygen Free Copper 2 Conductors (2C) with Red-Black internal cable color for easy polarity identification. External pvc jacket color is white cable lining. Insulation resists salt water, battery acid, oil, gasoline, heat, abrasion, and UV resistant radiation..
  • MARINE GRADE INSULATED CABLE - Perfect for radio, automotive, auto trailer, stereo, lighting, r/c under harsh outdoor conditions. UL Listed and CL3 Rated certification for marine wire install. Our pure copper marine cable can support up to 105 C (221 F) Dry and 75 C (167 F) Wet conditions.
  • FOR MARINE BOAT SPEAKERS, BOAT CABLE - Our GearIT boat wire cable comes in 25ft, 50ft, 100ft, 125ft, 150ft, 200f....
Check Stock