Reviews Tie Rod Bushing

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

OEMTOOLS 27178 Master Inner Tie Rod Tool Set Remove & Install Tie Rods in Cars Pickups and SUVs Includes 12 Crowfoot Adapters & 1/2 Inch Drive Tube

  • INNER TIE ROD REMOVAL TOOL SET: This tie rod kit Includes 12 sizes of crowfoot-style adapters: 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2" and....
  • ULTRA DURABLE: Tie rod puller tool's crowfoot adapters are nickel plated for durability.
  • Work the inner tie rod tool kit on your tierod end with the....
  • WIDELY USEFUL INNER TIE ROD TOOL: Be sure you have an inner tie rod kit that can easily reach your inner tie rod without removing the rack and pinion.
  • USE A RATCHET OR BREAKER BAR: Properly torque the inner tie rod remover on the tie rod end without hassle.
  • Tie rod end puller's 1/2 Inch drive tube....
  • EFFORTLESS ORGANIZATION: OEM Tools inner tie rod tool can be taken anywhere easily.
  • Tie rod end removal tool comes in a blow mold case for easy....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

All Balls 52-1027 Tie Rod Upgrade Kit

  • Tie rod housings have been strengthened in critical areas.
  • Tie rod upgrade kits feature tie Rods that are manufactured from seamless Steel tubing and heavy duty Rods.
  • Each kit contains two tie Rods, four tie rod ends along with the cotter pins and jam nuts.
  • Upgrade ATVs from the failure-prone 10 mm tie rod assemblies to the wide open heavy-duty 12 mm tie rod assemblies.
Check Stock

All Balls Racing 52-1025 Tie Rod Upgrade Kit

  • Tie rod housings have been strengthened in critical areas.
  • Tie rod upgrade kits feature tie Rods that are manufactured from seamless Steel tubing and heavy duty Rods.
  • Each kit contains two tie Rods, four tie rod ends along with the cotter pins and jam nuts.
  • Upgrade ATVs from the failure-prone 10 mm tie rod assemblies to the wide open heavy-duty 12 mm tie rod assemblies.
Check Stock

All Balls 52-1022 Tie Rod Upgrade Kit 52-1022 for Arctic Cat Applications (02-16),1 Pack

  • Tie rod housings have been strengthened in critical areas.
  • Tie rod upgrade kits feature tie Rods that are manufactured from seamless Steel tubing and heavy duty Rods.
  • Each kit contains two tie Rods, four tie rod ends along with the cotter pins and jam nuts.
  • Upgrade ATVs from the failure-prone 10 mm tie rod assemblies to the wide open heavy-duty 12 mm tie rod assemblies.
Check Stock

Caltric compatible with 2 Tie Rod Set Honda Foreman Rubicon Gpscape 500 Trx500Fga 2004-2008

  • Tie Rod housings have been strengthened in critical areas.
  • Tie Rod Upgrade Kits feature tie rods that are manufactured from seamless steel tubing and heavy duty rods.
  • Each kit contains two tie rods, four tie rod ends along with the cotter pins and jam nuts.
  • Upgrade ATVs from the failure-prone 10 mm tie rod assemblies to the Wide Open heavy-duty 12 mm tie rod assemblies.
Check Stock

Proforged 104-10529 Tall Outer Tie Rod End

  • TALL TIE ROD ENDS FOR ULTIMATE PERFORMANCE. Proforged tall tie rod ends are built with a longer ball stud to reduce bump steer on lowered vehicles - dramatically improving your handling. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability..
  • 1,000,000 MILE WARRANTY. You can install our tall tie rod ends with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A TIE ROD END? A tie rod end (also known as a tie rod) is part of....
Check Stock