Reviews Ticn Coated End Mills

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

• 4 Flute design for creating finer finishes and creating a higher metal removal rate.
• General purpose end mill for working on all types of materials.
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
• Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

• 4 Flute design for creating finer finishes and creating a higher metal removal rate.
• General purpose end mill for working on all types of materials and high temperature alloys.
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
• Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
• Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

• APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
• Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
• Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
• Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
• These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

ISCAR DGR2202C-6D IC328 Carbide Parting Inserts Cutter Tools Cutting Holder Grooving Inserts CNC

• A thin PVD coated TiCN layer on a tough substrate, for milling, parting, and grooving mainly steel and stainless steel at low to medium cutting speeds especially in unstable machining conditions.
• Grade or Coating Type: PVD / Coating Layers: TiCN.
• ISO Range - P/M/K(P25-P40)(M30-M40) / ISO Range - N/S/H (S20-S30).
• Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

• Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
• Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
• When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
• Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
• Used for slotting and peripheral milling.

Hakkin 20 Pcs Carbide Rotary Burrs Set, End Mill CNC Router Bit, 1/8\ Shank Nano Blue Coating Ball Nose End Mill, Double Cut Coat Rotary Drill for Die Grinder Woodworking, Engraving, Drilling, Carving

• TUNGSTEN CARBIDE: These end mills are made from high quality tungsten carbide for good hardness ,so these milling cutters have sharp edge..
• POLISHED AND TITANIUM COATED SURFACE: Well polished and titanium coated surface has a better anti-rust performance.surface is quite clean, neat, and there is no glitches or burrs on the shank..
• SHARP: These CNC cutter router bits have sharp cutting edges, can be use for milling holes, grooves and edges on plates, smooth cutting..
• 10PCS/SET: There are 10pcs end mills in this set, great replacement for your drill tools..
• HANDEL DIFFERENT MATERIAL: These milling cutters can be used to drill many items or materials, such as circuit boards, hardware parts, plastics, copper and stainless steel..

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

• [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
• [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
• [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
• [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
• [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

• 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
• Hardened and ground For Bridgeport type milling machines.
• Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
• 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
• For double and single end mills (single end mils only for sizes over 5/8").

LittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)

RIP Cutting Tools 6-PC 4-Flute SE AlTiN HP Carbide End Mill Set, Sizes 1/8-1/2

• Included Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2.