Reviews Three phase Voltage Stabilizer

3 Phase Voltage Monitoring Sequence Relay JVR800-2 Voltage Protection Relay Under Over Voltage Protector

  • The Composition of This Product: Three-phase voltage protector, chronograph and counter are integrated in one relay..
  • Function: This voltage protection relay has overvoltage, undervoltage, phase loss, phase sequence and unbalanced three-phase voltage protection..
  • Practicality: This 3-phase voltage relay does not require an external power supply. Has practical functions: power delay, output test, etc.
  • 2 rest modules are optional, manual and automatic..
  • The LCD can display data for easy reading..
Check Stock

Simran Power Converter Regulator Stabilizer with 110 Volt - 220/240 Volt Built-in Voltage Transformer, 20,000W (AR-20000)

  • 20,000 Watt Regulator with built-in 110v-240v voltage transformer. Note this transformer will not work with 2-Phase 220/240 Volt power.
  • Converts 110/120V to 220/240V or converts Single Phase 220/240V to 110/120V. Compatible with 50hz/60hz.
  • This stabilizer can regulate big range fluctuating voltage into general voltage output.
  • Input voltage AC 75V-130V or 180V-260V. Output voltage: AC 110v+-4% or ac220v+-260v.
  • 5 outlets on front of unit (accept US plugs and 2 prong Euro plugs). on/off switch. Thermal fuse - protects damage to your valuable equipment. Comes with terminal connectors - hardwire input required.
Check Stock

Omron K8DS-PH1 Phase Monitoring Relay

  • The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
  • Use 5 indicators to indicate: normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage..
  • Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S..
  • Overvoltage protection means that the voltage of the protected line is higher than the set value, and the delay is 3~8S, and the recovery is 6~20VAC..
  • Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action..
Check Stock

1Pcs Photocell Cap,TwistLock Photocell Shorting Cap,Photo Control Sensor Receptacle with Surge Protection,Dusk to Dawn 3 Prong Bypass Cap

  • ◆ Function: phase sequence detection, live line check, simple performance check, live cable identification, phase loss assessment, search for cable break position, detection of DC line break point, line maintenance.
  • ◆ Non-Contact Inspection: Non-contact inductive measurement of the terminal type without opening the cable, without touching the exposed high voltage fire cable, with the three highly insulated super inductive terminals inserted directly into the cable insulation skin 3-phase live detection for safe and quick productivity..
  • ◆ Positive and Negative Phase: With the LED display, dynamic sound and light perfectly show the positive or negative phase of the phase sequence of the three-phase power supply, which can be seen at a glance..
  • ◆ Magnetic base: The base plate of the instrument is equipped with 4 magnets that can stand a quality of 800 g. They can be attached to the metal case of the device during the test, and it is convenient and convenient to use..
  • ◆ Wide Voltage Test: This phase meter can detect three-phase voltages from 70V to 1000V and has excellent performance..
Check Stock

Simran AR-5000 Voltage Converter Transformer Regulator 5000 WATT Ivory/Grey

  • This CE certified 5000-Watt stabilizer/transformer can convert 110/120V to 220/240V or convert 220/240V to 110/120V. Compatible with 50Hz/60Hz.
  • It can regulate input voltage from AC 75V-130V or 180V-260V to output voltage: AC 110V+-4-percent or AC220V+-4-percent. Meter on front shows exact....
  • This stabilizer can regulate fluctuating voltage into general voltage output. Voltage stabilizer good for countries with unstable voltage supply.
  • Two universal outlets for 220V accept plugs from most countries. Three 110V outlets for 2 or 3 pin USA plugs. On/off switch. Indicator lamp.
  • Insulated power cord wired with a European shucko plug. Heavy metal casing. Fuse protected with fuse protected with built in circuit breaker. Total....
Check Stock

Siemens 3UG4631-1AA30 Monitoring Relay, Single Phase Voltage Monitoring, Screw Terminal, 1 CO Contacts, 0.1-60VAC/DC Measuring Range, 0.1-30V Hysteresis, 0-20s Delay Time, 24VAC/DC Auxiliary Voltage

  • Features: Undervoltage protector integrates three-phase voltage protector, chronograph and counter in one.
  • Multifunction: The protection relay has protection functions such as overvoltage, undervoltage, phase loss, phase sequence, three-phase voltage unbalance, etc.
  • Practical functions: The voltage monitoring relay has functions such as start-up delay and output test. 2 rest module optional, manual and automatic.
  • Specification: Monitoring Circuit: L1, L2, L3.
  • LCD Display: LCD data display, easy to read, no external power supply required.
Check Stock

PRINCE CASTLE Drive Motor Assembly 87-028AS

  • ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
  • 【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
  • 【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
  • 【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

SEVENSTAR AR 5000W Heavy Duty Voltage Reglator/Stabilizer with Built-in Step Up/Down Voltage Transformer

  • This CE certified 5000-Watt stabilizer/transformer can convert 110/120V to 220/240V or convert 220/240V to 110/120V. Compatible with 50Hz/60Hz.
  • It can regulate input voltage from AC 75V-130V or 180V-260V to output voltage: AC 110V+-4-percent or AC 220V + - 4-percent. Meter on front shows exact....
  • This stabilizer can regulate fluctuating voltage into general voltage output. Voltage stabilizer good for countries with unstable voltage supply.
  • Two universal outlets for 220V accept plugs from most countries. Three 110V outlets for 2 or 3 pin USA plugs. On/off switch. Indicator lamp.
  • Insulated power cord wired with a European shucko plug. Heavy metal casing. Fuse protected with fuse protected with built in circuit breaker.
Check Stock

Digital Phase Indicator , Akozon SP8030 Digital Phase Rotation Indicator LED Buzzer Phase Sequence Meter 200 ith Bag

  • It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
  • Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
  • Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
  • PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
  • It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check Stock

Phase Sequence Meter, 60V ~ 600V AC 3 Phase Sequence Rotation Tester, with 5 LED Lights, for General Measuring Tool

  • It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
  • Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
  • PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
  • Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
  • It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check Stock