Reviews Three jaw

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Wire Crimping Tool, Preciva Ratcheting Wire Crimper Tool Crimping Pliers for AWG20-10 Wire, Suitable for Insulated Electrical Wire Connectors

  • [Color Coded Crimping Jaws]: This Preciva insulated crimping tool comes with three different crimping jaws. Three colors marked. Red, Yellow and Blue, which are coresponding with the connectors. Red crimping jaws for the Red connectors, Bule jaws for the blue connector and Yellow jaws for the yellow connectors..
  • [Crimping Range AWG20-10/0.5-6mm²]: The crimper tool is suitable for AWG 20-10 wires, and the crimping area range is 0.5-6mm². Multiple applications for your daily use. RED jaw for (0.5-1.5mm² /AWG 20-16), BLUE jaw for (1.5-2.5mm² /AWG 16-14), YELLOW jaw for (4-6mm² /AWG 12-10)..
  • [Ratcheting Mechanism Design]: This crimper plier Comes with a ratcheting mechanism design for this Insulated terminals crimping tool, labour- saving design. One-hand operation could make a perfect crimp. And you can take less strength..
  • [Ergonomic Handle Design]: This wire crimping tool equipped with an ergonomic handle, easy to grip and operate. More comfortale to use. Eliminating hand fatigue..
  • [Widely Applications]: This crimping plier tool are widely used in various household electrical c....
Check Stock

Posi Lock 106 Manual Puller, 3 Jaws, 10 tons Capacity, 6\ Reach, 1/4\ - 7\ Spread Range, 13-1/3\ Overall Length

  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys.
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action.
  • Forged steel jaws for increased strength over investment casting.
  • 10-ton pulling capacity, 6" (152mm) reach and a spread range of 0.5 to 7 inches (13 to 178 mm) for increased pulling leverage.
  • Tapered jaws for better access in tight spaces.
Check Stock

LIUYE Triple Electrode A7TC Spark Plug for GY6 50 cc 70cc 90 cc 110cc 125 cc 150cc ATV Dirt Bikes Scooters and Kazuma Roketa Sunl Taotao Baja Redcat Jonway

  • Three-stage ignition makes the fuel in the engine fully burn, reduces coke deposition and improves engine power. The common spark plug uses single-jaw ignition, the three-jaw spark plug uses three-jaw ignition, and the ignition is fast and without delay, making your vehicle powerful..
  • A7TC spark plug has super ignition performance, high temperature resistance and corrosion resistance, which greatly improves engine performance..
  • Specification: Thread Diameter: 10mm. Thread Length:12.7mm.
  • Brand new 3 Electrode Spark Plug Fit For dirtbikes ATVs Cubs Honda CRF50 DAX and so on.for Transmission:All Chinese Made 50cc 139QMB, 125 150cc 154QMI 157QMJ.
  • Package Include:2 pieces Three Electrode Head Spark Plug.
Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

CMTOOL Bearing Puller 3 Jaw Pilot Bearing Puller Blind Bearing Puller Set Bearing Pullers Bushing Gear Puller Small Inner Internal Bearing Puller Kit Car Motorcycle Wheel Pilot Bearing Removal Tool

  • 【Widely Used 3 Jaw Bearing Puller】This 3 jaw pilot bearing puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings, agricultural machinery etc. This bearing puller is easy to operate, easy to use and durable..
  • 【Excellent Design】The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use. The forged and heat-treated steel jaws in the bearing puller are coated with a corrosion-resistant coating to make them more durable..
  • 【High-Quality Pilot Bearing Puller】 The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life..
  • 【Strong 3 Jaw Bearing Puller】 The internal bearing puller has a sturdy structure, high-strength torque and high toughness. As long as the small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm).
  • 【Precautions】 The claws of the bearing puller have positive and negative installation met....
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Heroes of Goo Jit Zu Goo Shifters Primal Rock Jaw Primal Hero Pack. Super Stretchy, Super Squishy Goo Filled Toy with a Unique Goo Transformation

  • Your favorite stretchy, squishy heroes have returned in their Primal Form and are ready to be powered-up by you!.
  • Rock Jaw is back in their Primal Form of a crocodile!.
  • Crush their Core to activate Rock Jaw's "Goo-formation"! Watch as the Goo inside his body changes before your eyes to release his inner power!.
  • Primal Form Rock Jaw has awesome "Chomp Attack" action!.
  • Rock Jaw can stretch up to three times his size!.
Check Stock