Reviews Threading Tool Set

hoodlaces Brand Cotton Replacement Hoodie String - Drawstring - Shoelace with Free Threading Tool (Red, 1)

  • EASY TO INSTALL: Step 1) Pull out your old hoodie string or drawstring. Step 2) Attach the hoodlaces brand hoodie string to the included threading tool. Step 3) Push the threading tool into the hood's threading tunnel and feed it all the way through hood. Step 4) Remove threading tool and enjoy!.
  • SWAPS IN SECONDS: Change out hoodlace brand hoodie strings fast! Step 1) Connect new hoodlace to current hoodlace. 2) Pull out existing string & new one pulls in! 3) Detach & store for another day..
  • QUALITY CONSTRUCTION: hoodlaces brand drawstrings feature 100% double stitch cotton, paracord or 3M (depending upon version purchased) and durable stainless steel tips and end caps. hoodlaces are machine washable..
  • WHAT YOU GET: (1) 120cm Cotton hoodie strings. (1) Threading tool. (1) Male end cap. (1) Female end cap..
  • HASSLE-FREE MONEY-BACK-GUARANTEE. If you are not satisfied with your hoodlaces product just return it within 30 days for a full refund. **hoodlaces Brand -- Exclusive Product Available Only From Product Marketing Development**.
Check Stock

2 sizes Included! 1/2'-28 RH Threading Alignment Tool (TAT) Die Starter Barrel Guide for .22 / .223 - Gunsmithing

  • EASY TO INSTALL: Step 1) Pull out your old hoodie string or drawstring. Step 2) Attach the hoodlaces brand hoodie string to the included threading tool. Step 3) Push the threading tool into the hood's threading tunnel and feed it all the way through hood. Step 4) Remove threading tool and enjoy!.
  • SWAPS IN SECONDS: Change out hoodlace brand hoodie strings fast! Step 1) Connect new hoodlace to current hoodlace. 2) Pull out existing string & new one pulls in! 3) Detach & store for another day..
  • QUALITY CONSTRUCTION: hoodlaces brand drawstrings feature 100% double stitch cotton, paracord or 3M (depending upon version purchased) and durable stainless steel tips and end caps. hoodlaces are machine washable..
  • WHAT YOU GET: (1) 120cm Cotton hoodie strings. (1) Threading tool. (1) Male end cap. (1) Female end cap..
  • HASSLE-FREE MONEY-BACK-GUARANTEE. If you are not satisfied with your hoodlaces product just return it within 30 days for a full refund. **hoodlaces Brand -- Exclusive Product Available Only From Product Marketing Development**.
Check Stock

Needle Threader Tool, 35 pcs Simple Threader for Needles, Upgrade Needle Threader for Hand Sewing and Sewing Machine, Sewing Needle Threader for Small Eye Needles (with Needles)

  • 【Make Threading So Easy】Our simple needle threader tool is a great helper for who love to sew and visually impaired. Just get needle threader and you don’t have to fight needle threading..
  • 【Easy to Use】Finish threading in 3 seconds! Our sewing needle threader feature a small hook, enabling it to go through needles with small eyes. A lot easier to work with than the wire loops..
  • 【Perfect for Hand and Machine】Our needle threader tool is perfect for hand sewing and sewing machine. Our simple needle threader is the best partner for your needle..
  • 【Good Gift for Mother and Elder】The handy-dandy little thing is a great gift for mother elder and tailors. Our simple needle threaders are helpful to Help solve the frustrating threading problem..
  • 【Pratical Needle Threader Set】The item includes 10 pieces sewing needle threaders in 5 colors and 30 pieces needles. Keep them in your sewing room as well as end tables so you are ready for any mending!.
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

Needle Threaders, 41 pcs Simple Threader for Needles Suit, Upgrade Needle ThreaderTool for Hand Sewing and Sewing Machine, Sewing Needle Threader for Small Eye Needles (with Needles)

  • 【Valued Needle Threaders Set】The item includes 12 pieces sewing needle threaders in 2 colors, 25 pieces needles, 2 pieces thimbles, 1 piece seam ripper and 1 piece drawstring threader. Keep them in your sewing room as well as end tables so you are ready for any mending!.
  • 【Make Threading So Easy】Our LKJIO simple needle threaders tool is a great helper for who loves to sew and visually impaired. Just get needle threader and you don't have to fight threading with needle..
  • 【Easy to Use】Finish threading in 3 seconds! Our sewing needle threader feature a small hook, enabling it to go through needles with very small needle eye. A lot easier to work with than the wire loops..
  • 【Perfect for Hand and Machine】Our needle threader tool is perfect for hand sewing and sewing machine. Our simple needle threader is the best partner for your needle..
  • 【Good Gift for Mother and Elder】The handy-dandy little thing is a great gift for mother elder and tailors. Our simple needle threaders are helpful to Help them solve the frustrating threading problem..
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

KECHUANG 60-Pieces Tap and Die Set Metric and SAE Standard Internal and External Threaded Tool Set

  • ► PREMIUM MATERIAL- Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ► EXCELLENT CUTTING PERFORMANCE-All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance, Can cut materials such as cast iron, steel, aluminum, copper, Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • ► VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ► EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
  • ► WIDE APPLICATION: Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Check Stock

ORION MOTOR TECH 86pc Tap and Hex Die Set in SAE and Metric | Titanium Coated Steel Tap Set and Die Tool Set for Homeowners Mechanics Metric Standard Internal External Threading(Iron Case)

  • ALL-IN-ONE TAP & DIE SET: This 86-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the most needed standard and metric sizes, from #4 (14/125") to 5/8 inch and from M3 to M16.
  • USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
  • PREMIUM DURABILITY: This tool set for homeowners, craftsmen, and mechanics is made of high-carbon chromium bearing steel.
  • titanium plating provides even greater strength, durability, and longevity so you can tackle any job with confidence.
  • ADDITIONAL TOOLS: In addition to the 78 taps and dies, this tool set includes both adjustable and T-handle wrenches, a 1/8" flathead screwdriver, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
  • BLOW-MOLDED CASE: The metal storage case stores and organizes the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Check Stock

1/2\ NPT Pipe Carbon Hex Rethreading Die

  • ✅ One Set is Enough: Our Die set include 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14, 1/2''-13, 9/16''-12, 5/8''-11, 3/4''-10, 7/8''-9 and 1''-8 UNC. A variety of dies are sufficient for almost all maintenance and repair work..
  • ✅ Superior Durability: We cooperated with the material research institute to change the ratio of carbon in the material, greatly improve the comprehensive mechanical properties of the material, and greatly increase the service life of our dies..
  • ✅ Precision Thread: The latest production technology maximizes the processing accuracy of the thread, and the outer surface of the threading die is smoother..
  • ✅ Portable Metal Case: An exquisite tool case will bring you great convenience, and the tools will be returned in time after use, reducing the risk of gadget loss..
  • ✅ 1 Year Warranty: No matter what problems are encountered when using our re-threading hex die set, we will solve it for you within 6 hours, and one-year warranty!.
Check Stock

OSCARBIDE 5/8\Shank 7 Pieces/Set Indexable Lathe Turning Tool Holder,CNC Metal Lathe Tools Heavy-Duty for Turning Grooving Threading Nickel Plated Cut Off Set, Tin Coated Carbide Inserts

  • OSCARBIDE 5/8" Heavy-Duty Turning tool set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external lathes turning holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning Holders are made of high quality steel with Nickel Cotated, Cutters are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Metal Lathe Cutting Tools Used for semi-finishing/roughing steel, Metal,Fit for Turning,grooving or threading.
  • Replacement Cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting tool holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock