Reviews Threaded Rod Cutter

JWL 1 Cane Walking Stick Handle Shift Knob Ball Style Cast Aluminum with Threaded Rod Connector

  • Cast Polished Aluminum Ball Handle with threaded rod connector provided.
  • Very Strong Cast Aluminum material tapped to receive threaded rod.
  • 3/8" x 16 threaded rod 2" long connector to attach handle to cane shaft.
  • 2 1/4" high by 1 1/2" in diameter & 15/16" where base meets the shaft.
  • Base at connection point is about 15/16" to 1 " diameter.
Check Stock

uxcell M6 x 250mm Fully Threaded Rod, 304 Stainless Steel, Right Hand Threads

  • Fully threaded rods are widely applied in many occasions..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
Check Stock

mingya Cutting Plier Tool Fencing Pliers, Red, 20*5*1.5 cm / 7.8*2*0.6 inch / L*W*H

  • 1. WIDELY USED. The wire cutter opening at 20 degrees, cutting distance could up to 0.4 inch. 2 sharp objects on the handle enable to pull nail and wire with ease. Suitable for cut chains, wire, mesh, threaded rod, heavy gauge wire etc in Shop, Home Or Service Field..
  • 2. LONG LASTING. The wire cutters use drop forged hardened alloy steel jaws, Through Integral heat treatment and high frequency quenching treatment for high hardness. Black oxide finish could anti corrosion. Cutting edges hardness about 64 hrc..
  • 3. HUMANIZED DESIGH. Lever design for excellent cutting performance. Non-slip plastic soft handle can be hold comfortably and firmly even when your hands are wet. Spring could help you open cutter easily. Wire latch holds handles together when not in use. Occupy less space..
  • 4. SAVING YOUR COST. Reinforced rivets allow pliers to be attached tightly and will not drop easily, ensuring a longer service life. The ergonomic handles help prevent hand fatigue during using..
  • 5. WARRANTY 6 MONTHS, If Quality Problems, A full refund or a new replacement can be arranged in warranty. Any problem please contact me. Please kindly advise free for your concerns.
Check Stock

Tolsen Bolt Cutters Heavy Duty, 36-Inch Bolt Cutter for Padlocks, Lock Cutter Heavy Duty Chain, Rods, Rivets, Locks and Wire Cutter - Ergonomic Non-Slip Handle Bolt Cutter - 36 Bolt Cutter

  • [HARD STEEL JAWS] This heavy-duty bolt cutter is made of strong, drop-forged hardened steel jaws for long-lasting blade life and has an adjustable bolt mechanism for proper blade alignment..
  • [CUTS THICK STEEL] Designed and manufactured for maximum durable blade life. The bolt cutter strong jaws can cut 3/8-inch low-carbon steel and 5/16-inch medium-carbon steel in industrial jobs. Great for cuts bolts, chain, threaded rod, cable wire and more.
  • [CENTER CUT DESIGN] Centered blades with slightly rounded cutting edges that are beveled on both sides to cut with precision. The jaws are adjustable and replaceable. Cut through soft, medium and hard metals with confidence using these bolt cutters..
  • [ERGONOMIC GRIPS] Our bolt cutter features ergonomic handles and comfortable nonslip rubber grips fit down over steel handles for enhanced strength and comfortable controlled cutting of metals..
  • [100% SATISFACTION GUARANTEE] You are protected with our 100% No Questions Asked Guarantee for either a replacement or refund. We love Our customers that’s why we care about only putting out high quality products that satisfies your needs.
Check Stock

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

  • Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
  • Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
  • The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
  • Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
  • It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
  • Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
  • Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....
Check Stock

LABOR SAVING DEVICES 81-000 Creep-Zit Fiberglass Wire Running Kit green

  • Pro 36ft kit, threaded connector wire running rod.
  • 1 luminous Fiber Fuse 6ft push/pull rod with male & female threaded connector ends.
  • 5 Fiber Fuse 6ft push/pull rods with male & female threaded connector ends.
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

Tech 8” Mini-Bolt Cutter, Wire, Cable, Chain, Spring Loaded Return, Comfortable Grips, Snips, Hand Tools, 8-inch

  • Heat treated, chrome vanadium jaws can cut through bolts, threaded rod, wire, mesh, chain links, wire fence, and more..
  • Compound action for cutting power with a spring-loaded return that opens the cutter between each cut..
  • TPR (Thermo Plastic Rubber) handles for comfort and ease of use..
  • 6.1mm maximum opening can handle 3/16” thick material. Depth-of-cut adjustment screw. This is a perfect kitchen drawer and hobbyist tool. For cutting most graded bolts and chain link fencing you need to step up to our 12 or 14 inch cutters.
  • Built-in handle lock for convenient, compact storage..
Check Stock

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

  • 【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
  • 【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
  • 【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
  • 【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
  • 13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
  • 【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..
Check Stock

The Hillman Group 180210 Coupling Nut 1/4 - 20 50-Pack

  • Threaded fasteners for joining two male threads, most commonly threaded rod.
  • Used to make up long rod assemblies from shorter lengths of rods.
  • Similar to hex nuts with extreme height measurements giving them length.
  • Use with fasteners of the same threading and finish.
Check Stock