Reviews Threaded Insert Tool Set

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • ...universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
  • Use the breaking pin tool to remove tang from insert.
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (10 pcs)

  • The hand screw tap used to make new M6 threads or re-thread damaged and/or jammed threads..
  • Wire thread insert tool is a tool specially used when installing (or removing) wire thread inserts..
  • The set also includes 6pcs M6*1*1.5D and 6pcs M6*1*2D threaded insert screw made of 304 stainless steel for use..
  • They are widely widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
  • It is cheap and can satisfies your practice of tapping,screw insert installation and removal.For a beginner,they are a good combination..
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

E-Z LOK EZ-329-6 Thread Repair Kit for Metal Carbon Steel Threaded Inserts 3/8-16 and Installation Tools

  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair tool kit..
  • CARBON STEEL INSERTS – Kit includes standard carbon steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • KIT INCLUDES – Convenient kit includes threaded inserts for metal, drill, tap, and threaded insert installation drive tool..
Check Stock

E-Z Lok Threaded Inserts For Metal Assortment Kit Carbon Steel Metric Internal Threads M3-0.5 M4-0.7 M5-0.8 M6-1.0 M8-1.25 50 pieces

  • THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit..
  • AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

POWERTEC QTI1004 Threaded Inserts for Wood Furniture | Zinc Plated | 3/8”-16 Internal Threads | 18mm Length – Pack of 50

  • INCLUDES: (50 pack) 3/8-16 Threaded Inserts (also referred to as Insert Nuts).
  • FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
  • VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
  • EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71380(not included) after drilling the appropriately sized hole.
  • SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 3/8”-16, Total Length 0. 709 (18mm).
Check Stock

POWERTEC QTI1002 Threaded Inserts for Wood Furniture | Zinc Plated | 1/4”-20 Internal Threads | 11.9mm Length – Pack of 50

  • INCLUDES: (50 pack) 1/4-20 Threaded Inserts (also referred to as Insert Nuts).
  • FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
  • VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
  • EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71383(not included) after drilling the appropriately sized hole.
  • SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 1/4"-20, Total Length 0. 468”(11. 9mm).
Check Stock

20pcs M12 x 1.25 x 1.5D Wire Thread Insert Stainless Steel Metric Helicoil Type Thread Repair Insert

  • There is a box which you can store and convenient to carry.
  • It is convenient and quick to convert and inch threaded holes with wire threaded inserts..
  • In the event of a threading error or repair of a damaged female threaded hole, a threaded insert can be used as a means of repair to provide a cost-effective recovery of the screw hole..
  • The wire threaded insert set are placed in the screw hole of the workpiece such as aluminum alloy to form a high-strength, wear-resistant, high-accuracy female thread..
  • High quality stainless steel material can make sure the durability and stability of the product.
Check Stock

Reducer Nut, Industrial Accessory Threaded Bushing Screw Hole Repair Thread Protection Tool for Industrial Supplies

  • The thread repair socket is made of stainless steel, which has high strength and is not easily deformed during the thread repair process..
  • The wire thread insert set is fitted in the screw hole of the metal workpiece to form a high‑strength and high‑accuracy standard female thread..
  • This socket is a cost‑effective repair tool when threading errors or repairing damaged female thread holes..
  • Maintenance nuts are mainly used in aviation, automobiles, lamps, molds, mechanical equipment and other manufacturing fields..
  • The wire thread insert can be used to switch between metric and inch threaded holes, which is convenient and quick..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock