Reviews Thread Insert Kit

TIME-SERT 3/8-16 Starter Bolt Thread Repair kit P/n 1535

  • 3/8-16 Starter bolt thread repair kit cast iron blocks or aluminum blocks P/n 1535 TIME-SERT.
  • TIME-SERT P/n 1535 Kit includes all the tools and 4 special inserts with straight section for bolt alignment built into the insert..
  • The stripped Starter bolt thread depth of the hole should be 1.200" inches or 30mm Depth minimum..
  • Note: This kit can also repair a failed coil style insert. The failed hole should not be larger than the drill included in kit which is .484 inches..
Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

Desk Needle Threader Automatic Double Needle Hand Threader Hand Threader Green Double Hole Needle Threader Insertion Tool for Sewing Machine DIY Hand Made Works Threader

  • 【High Quality】100% brand new and high quality. This needle threader is made of plastic material, light weight and durable to use..
  • 【Double Hole Design】Double hole design helps thread the sewing machine needle more easily.With this needle threader kit, threading small eye....
  • 【Convenient】There is a tiny hole on the opposite end of the thread, it is for holding the sewing machine needle while you easily insert it into....
  • 【Easy to Operate】It is suitable for people who is in trouble of threading. If you are the type of person to take a sewing kit on holiday, this....
  • 【Easy Insert】There is a tiny hole on the opposite end of the thread, it is for holding the sewing machine needle while you easily insert it into....
Check Stock

XT AUTO 30pcs Stainless Steel M8 x 1.25mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 30pcs thread repair tool kit: The Kit Set not only includes the wire thread inserts, but the twist drill bits, wrench, thread taps, breaking pin tool which can solve your most repair needs..
  • High quality control: Made of precision high-speed steel for strength, wearproof and durability..
  • Easy to install: 1.Drilling - drill out the damaged threads using correctly sized drill bit provided 2.Tapping - Tap re-drilled hole using tap supplied (Cutting oil recommend) 3.Install the insert - place insert on installation tool and position the adjustable ring clockwise.4.Tang removal - remove the tang use the break tool..
  • Wide application: Great choice for restoring damaged threads in steel, iron, aluminum and anywhere which metal threads become stripped, crossed or damaged..
Check Stock

7/16-14 Oversized Big-SERT Kit cast Iron Big or Small Block Thread Repair p/n 5761E

  • This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads.Suitable for engine repair and other automotive applications..
  • Sae: The kit Has Altogether 243 Pieces including insert installations, wire thread inserts, twist drill bits, thread taps, lug breaking tools ,thread gauge and adjustable tap wrench handle that allow you to have a smooth repairing experience.All Made According to Professional Standard..
  • All tools were packed in a convenient carrying case, easy and fast in collecting and placing the tools. Each accessory has its place, inserts will even be packaged in separate boxes..
  • Creates stronger internal thread in soft materials.Also come with detailed instructions..
  • Don't bother to spend a lot of money on a variety of models,all you need is our kit.Once for all..
Check Stock

Bonost 500Pcs Threaded Inserts Kit M2 M3 M4 M5 - Female Thread Heat Set Insert Brass Knurled Thread Insert Nuts for Plastic Injection Molding 3D Printing Metric

  • 【Designed for Injection Molding】: With deep & clear knurls, the threaded inserts will add enough strength to screw connections when inserted into plastic components. The softened plastic will flow into the knurl pattern and then harden to form a firm bond with the insert..
  • 【High-quality Material】: Made of premium brass material, our threaded insert for plastic has both aesthetics and high strength, which can be used for a long time. And the high thermal conductivity of brass thread inserts means faster heating and insertion into plastic parts..
  • 【How to Use】: Female thread knurled insert nuts are suitable for mounting into tapered holes by heating or for molding during injection molding. You can use a soldering iron to heat it up and then pressing it into the hole. It is easy to control and at a low cost..
  • 【Professional Insert Nuts Kit】: Various metric thread sizes available, including M2, M3, M4, and M5. Widely applied in laptop plastic housings, 3D printers, automotive, electrical injection molding, and more. And the every type of heat set inserts has an individual bag to prevent them from mixing in transit..
  • 【What You Get】: 500 pcs threaded inserts assortment kit, and customer friendly service. There are 15 different sizes to s....
Check Stock

E-Z LOK Threaded Insert for Hard Wood Assortment Kit Brass Thread Inserts 6-32 to 3/8-16

  • THREADED INSERTS FOR HARD WOOD – E-Z LOK Threaded Insert Assortment Kit for hard wood. Brass threaded inserts for putting strong, machine threads in wood..
  • PROPRIETARY KNIFE THREAD – E-Z Knife thread inserts in this thread repair kit provide superior holding power using a proprietary external “knife” thread to slice into the wood..
  • EASILY INSTALLS – The brass metal threaded inserts are easily installed with a screwdriver, bolt/jam nut, or optional drive tool..
  • FOR USE WITH APPLICATIONS – The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple..
  • KIT INCLUDES – 10 pieces each: 6-32 (0.375" long), 8-32 (0.375" long), 10-32 (0.500" long), 1/4-20 (0.500" long), 5/16-18 (0.625" long), 3/8-16 (0.625" long)..
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

Swpeet 300Pcs 5 Values M2 M3 M4 M5 M6 Female Thread Knurled Nuts Brass Threaded Insert Embedment Nuts Hydraulic Welded Joint Injection Molding Assortment Kit Perfect for 3D Printing Injection Molding

  • [ Packaging includes ]: In this kit, You will get 300Pcs M2 M3 M4 M5 M6 Female Thread Knurled Nuts in sufficient quantity for your use, plastic boxes are durable in any way, and all parts are in their compartments to prevent mixing during transportation..
  • [ Various Sizes ]: M2 M3 M4 M5 M6 Female Thread Knurled Nuts Kit, Total 15 different sizes can meet your different meets. Special thread design make it easier to operate..
  • [ High Quality Material ]: These Female thread knurled nuts are made of durable brass with excellent rust resistance and oxidation resistance to ensure long-term use. Rust-proof, anti-corrosive, non-toxic, acid-resistant, and does not release harmful substances..
  • [ Why You Choose Us]: These Brass Threaded Insert Embedment Nuts can be installed into the tapered holes of the threads by ultrasound or heat, or moulded during injection. The material of the nuts is brass, which can resist heat. Hardness and toughness are more than 10 times higher than aluminum, high processing difficulty, complicated production process..
  • [ Widely used ]: Swpeet threaded insert nuts are widely used in injection molding, for fastening, can be installed in the cone hole by ultrasonic or heat, or in the injection process. Since the insert has a conduction valve....
Check Stock

MEIYYJ 500Pcs M2 M2.5 M3 Metric Female Thread Knurled Brass Threaded Insert Embedded Nuts Assortment Kit,Double Pass Knurl Nuts Copper Embedded Fastener for Furniture Electrical and More Projects

  • Type of Product: Brass Threaded Insert Embedded Nuts Assortment Kit..
  • Product Material: Made of premium brass, which has high hardness, no deformation, durable and reliable for long time use..
  • Package Detail: In this set, it include 10 kinds of m2, m2.5, m3 knurl thread inserts nuts total 500pcs which are well packed in a plastic box..
  • Easy To Use：These Brass Threaded Insert Embedded Nuts can be installed by heat into thread tapered hole or molded in during injection, the insert has a guide so there is no need for a counter bore or countersink. easy to install..
  • Product Feature:These Knurl Thread Insert Nut can be widely used on the injection moulding for tightly fixing..
Check Stock