Reviews Thread Cutting Tool

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

ChgImposs Imperial Screw Pitch Gauge, 55 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 4-48 Blades Range

  • It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 19, 20, 22, 24, 28, 40, 48.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All 20pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

48 Pc Thread Measuring Wire Set 16 Different Diameter Sizes Pin Set

  • Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long lasting durability.
  • Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • Thread pitch gauge function: can be applied to measure the pitch of the thread.
  • Center gauge function: apply to grind and position thread cutting tool on a lathe.
  • Advantage: accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock

PTSTEL 39 PCS Tap and Die Set Metric & SAE Essential Threading Tool Kit for Cutting External and Internal Threads with Adjustable Handles Accessories and Case

  • High-quality & Durability: PTSTEL metric & SAE tap and die set is made of industrial grade GCR15 bearing steel, which is non-corrosive and durable,....
  • Efficient Cutting: All cutting teeth of the tap and die set are precisely CNC machined and accurately heat treated to a rockwell hardness 60 HRC to....
  • Wide Range of Applications: The cutting thread tool set is processed with internal thread and external thread, and strong torsional force is ideal for....
  • Easy to Storage: Each taps and dies set is equipped with plastic tool box with corresponding scales engraved. You will never get the wrong size when....
  • Most Complete Size: 17pcs metric & SAE tap and die set: SAE: 5/16-18, 3/8-16, 7/16-14, 1/2-13, NPT tap (1/8-27), #4-40, #6-32, #8-32, 1/4-20 METRIC:....
Check Stock

ChgImposs Imper Screw Thread Pitch Gauge, 55 Degree Cutting Gauge Tool with Blades Range 4-62G

  • It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • It was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

ChgImposs Metric Screw Pitch Gauge，60 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 0.25-6.0 Blades Range

  • It is 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All 24pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

Center Gage Thread Gauge Whitworth 55 & 60 Degree Inch Metric Screw Thread Pitch Gauge 3pcs

  • 【Material】The screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long-lasting durability.
  • 【Package content】The screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • 【Thread pitch gauge function】Can be applied to measure the pitch of the thread.
  • 【Center gauge function】Apply to grind and position thread cutting tool on a lathe.
  • 【Advantage】Accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock

5pcs Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set, Metric Imperial and America SAE Type Screw Gauge for Industrial Measurement, 3Pcs Center Gage + 1Pc America Type + 1Pc Metric Imperial…

  • ☆ 52pcs Thread Pitch Gauge ☆ : MR Stainless Steel Screw Pitch Measuring Tool 0.25, which is useful to check the tool angle when cutting threads on a metal lathe, check the angle of the thread cutting tool on the V-groove of the gauge.
  • ☆ Premium Material ☆: Made of MR stainless steel, the toothed edges are sharply defined, and the numbers are stamped and easy to read, to ensure the accuracy of measurement.
  • ☆ Good Elasticity & High Strength ☆ The Surface of thread pitch gauge is polished, chrome-plated and high rust-proof.
  • ☆ Metric & Imperial ☆: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3 0.25and 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • ☆ At a glance, Easy to use ☆ : ideal for check the thread size, can be used for measuring the imperial screw thread and metric.
Check Stock

2 Pack Screw Pitch Cutting Gauge, 51 Pcs America SAE Type Screw Thread Pitch Gauge and 58 Pcs Metric&Inch &America SAE Type Caliper Gages Measuring Tool

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

52pcs Thread Pitch Gauge SAE Stainless Steel Screw Pitch Measuring Tool (Metric&British Whitworth(52pcs))

  • ✿Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • ✿Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿It is useful to check the tool angle when cutting threads on a metal lathe, check the angle on the thread cutting tool on the V-groove of the gauge.
  • ✿Use for check the thread size, can be used for measuring the metric and imperial screw thread.
Check Stock