Reviews Thread Cutting Screws

#10 x 3 Stainless Steel Deck Screw Square Drive Flat Head with 4 Nibs Underhead Quantity 100 Type 17 Wood Cutting Point 2 of Thread Length 10 Screw Diameter 3 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • GREAT TO KEEP AROUND: 18-8 Stainless Steel is the ideal material for both corrosion resistance and strength. Why use any other screws and worrry about rusting, corrosion and eventual replacement. Ideal for use in wood, composite material and even wet environments! Newport Fastener Screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 3" inches with 2" inches of thread.
Check Stock

Power Pro 48610 Wood Screws, #9 x 2-1/2\

  • 【HIGH QUALITY MATERIAL】:Made of Carbon Steel, resistant to rust,good corrosion resistance in bad environment,commonly have a sharp point that helps penetrate the material..
  • 【MATERIAL & WORKMANSHIP】:Adopting high-precise cutting technology, the screw thread is very precise, clean, sharp, the deep and clear thread can easily penetrate the wood and plastic and ensure a secure hold,is not easy to deform and slid while using..
  • 【PACKAGE INCLUDES】:8 Kinds Phillips Flat Head Self-Tapping Screws. Contains M3 x 6mm/8mm/10mm/12mm/16mm/20mm/25mm/30mm wood screws and M6 screw anchors, meet all your demands..
  • 【STORAGE BOX】: There are 420 pcs different types of screws. All of screws will be packed in a sturdy convenient case, can be used for a storage box, is organized to you..
  • 【WIDE APPLICATION】:Self tapping wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc.Widely used in electrical products,communication equipment, ship assembly,machinery, furniture,other maintenance work,DIY arts and craft..
Check Stock

XHMAXE 52pcs Stainless Steel Metric Imperial Screw Gauge, 55 Degree Multi-Purpose Screw Thread Pitch Cutting Gauge Measuring Tool

  • Perfect Combination: The set contains 3 x pitch gauges with 3 x center gauges and 1 x bore gauge, which are more convenient to use together and more versatile, making it easy for you to use.
  • Pitch Cutting Gauge: Our pitch cutting gauge includes different sizes of thread inserts, which can help you accurately measure internal and external threads, and can measure two screws to help you find the replaceable type.
  • Center Gauge: Hardened with ground edges and notches. Suitable for grinding and positioning thread cutting tools on lathes.
  • Drill Gauge: 17/64-1/2, 0.062-0.250 Bolt and wire diameter gauge, 29-hole sizes remain constant, providing precision accuracy. Hanging hole design, easy to hang.
  • High Quality Material: The screw thread pitch cutting gauge tool set is made of stainless steel, which is durable and rust-proof. Chrome-plated treatment, high strength, good resilience, beautiful appearance, effectively prolong the use time.
Check Stock

#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.
Check Stock

#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
Check Stock

#10 x 3-1/2 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 2 1/4 of Thread Length 10 Screw Diameter 3 1/2 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 3-1/2" inches with 2-1/4" inches of thread.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • ...od. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearin....
Check Stock

48 Pc Thread Measuring Wire Set 16 Different Diameter Sizes Pin Set

  • Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long lasting durability.
  • Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • Thread pitch gauge function: can be applied to measure the pitch of the thread.
  • Center gauge function: apply to grind and position thread cutting tool on a lathe.
  • Advantage: accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • ...od. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearin....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ...od. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearin....
Check Stock