Reviews Thread Chasers

Trail Chasers Ground Markers Orange 6 Inch Marking Whiskers with Lightweight Non-Rust Aluminum Stakes (Pkg of 25)

  • For commercial use Orange Trail Chasers have become a prime choice for marking buried utility lines, communication lines, underground alarm or signal lines, cables or conduit, construction site planning, and hazard markers..
  • For home and garden projects use Orange Trail Chasers for marking hunting locations, hiking trails, outdoor events, social distancing, paintball or steel challenge courses, landscape planning, athletic fields and more..
  • Trail Chasers are rugged, durable, and highly visible ground markers for short or long term use that will last through wind, rain, snow and shine..
  • Package includes everything you need to start using immediately. No extra trips to buy nails or stakes. Also available in UV resistant APWA code colors orange, blue, white, pink, yellow, red, green, and purple..
  • PRO TIP – Our lightweight stakes are great for carry, but sometimes the ground is harder than anticipated. Use a ¼” x 12 in. drill bit on a cordless drill to predrill a ground hole. This will make placement much easier! For heavier home, commercial or industrial use in compacted soil or gravel try Trail Chasers Hard Ground Markers 6 Inch Marking Whiskers with Upgraded Stakes..
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

Trail Chasers Hard Ground Markers Red 6 Inch Marking Whiskers with Upgraded Stakes (Package of 25)

  • Upgraded stakes for use in compacted soil or gravel. Heavier than our Lightweight version, but much stronger..
  • For commercial use Red Trail Chasers have become a prime choice for marking buried utility lines, communication lines, underground alarm or signal lines, cables or conduit, construction site planning, and hazard markers..
  • For home and garden projects use Red Trail Chasers for marking landscape designs, garden layouts, athletic fields, temporary golf tee boxes, horse arenas and dressage areas, paintball grids and barrier layouts, temporary parking spaces on turf, outdoor event planning, shooting range stages, corner flags GEO caching and much more..
  • Trail Chasers are rugged, durable, and highly visible ground markers for short or long term use that will last through wind, rain, snow and shine..
  • Package includes everything you need to start using immediately. No extra trips to buy nails or stakes. Also available in UV resistant APWA code colors orange, blue, white, pink, yellow, red, green, and purple..
Check Stock

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

  • 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
  • 3 Different types of sockets cover various situations of oxygen sensor locations.
  • Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
  • Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

Storm Chaser Shirt Funny Tornado Twister Quote Gift T-Shirt

  • Funny storm chaser shirt for everyone who is into storm chasing, severe weather, tornados, tornadoes, twisters and the real bad weather. Storm hunter gift shirt for tornado chasers and twister hunters. Funny meteorology shirt, meteorologist shirt..
  • Storm hunter gift, storm chaser gift, tornado gift, tornadoes gift for meteorologists, hobby storm chasers and tornado chaser. Great for storm hunting, tornado chasing, storm chasing tours or tornado watching..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

  • Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines..
  • Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance..
  • Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire..
  • Warranty: We offer 30 days and 365 days free replacement warranty..
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

Apeixoto Oxygen Sensor Removers 5PCS Oxygen Sensor Sockets with Packing Case Oxygen Sensor Socket Set Removal Tool

  • Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum switches and fuel injections. These tools can be used most vehicles..
  • Package: The package includes 5pcs sockets and wrenches included in the red case.The whole tool set comes in a solid red case which will protect the tools well during shipping and let you keep the tools well after usage..
  • Specifications: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
  • Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..
Check Stock