Reviews Thermally Conductive Adhesive Tape

iPower GLDUCTAPE50 2 Inch 55 Yards Professional Grade Aluminum Foil HVAC Ducting Hose Repair Adhesive Tape, 50m, Silver

  • 2.0 inches wide x 165 feet (55 yards). 2.0 mil foil and 2.0 mil backing. Performs from -20 F to 220+ F. Ensure that surface is clean, dry, free of grease, oil or other contaminants before applying aluminum tape.
  • High-quality aluminum foil coated in epoxy resin with strong, cold-weather solvent acrylic adhesive set on a easy-release silicone paper liner to preserve the adhesive and provide ease of use.
  • Ideal for an array of uses, including general repair, sealing hot and cold air ducts (excellent HVAC tape), duct insulation systems, sealing aluminum, stainless and plastic seams / joints, temporary repair of metal surfaces, copper pipe fixing, etc..
  • Resists flame, moisture / vapor, UV degradation, odor, weather, some chemicals and smoke transmission. Good for both indoor and outdoor use. Chemically resistant, thermally conductive (helping cooling/heating efficiency), heat and light reflective.
  • iPower aluminum foil tape provides a durable bond at low and high temperatures. Conformable backing and pressure sensitive adhesive means it will adhere properly to a variety of smooth and irregular surfaces.
Check Stock

AVNTKER Double Sided Thermal Tape 1-inch/25mm Super Strong Adhesive Non Conductive Heatsink Sticky Tape for CPU, GPU, SSD Drive, HDD, VGA, PCB, LED Strips, 3D Printer, Raspberry Pi Radiator

  • Material: Double sided thermal tape is made of a mixture of acrylic polymer, thermal conductive ceramic powder and silicone adhesive, full roll size 20m x 25mm x 0.25mm (Length:66 feet x Width:1-inch).
  • Excellent Performance: Thermally conductive sticky tape has super stickiness and can firmly fix the heatsinks to the heating element, effectively improving the heat transfer between electronic components. (substitute screws, rivets, welds, fastener and liquid glue).
  • High Durability: Thermal duct tape has extremely stable performance, durable adhesion on both sides, no residual glue, and can work for a minimum of 5 years in high temperature environment of 80-155°C. ( If combined with heat conduction paste or cooling silica gel pad, the effect will be better ).
  • Security Application: The heat dissipation tape is insulative and non-conductive, which eliminates any risks of causing short circuit, adding more protection to the CPU, GPU, VGA cards, HDD, SSD drive, VRAM, M2 hard disk, Water cooling kit, Laptop, PCB, IGBT, Mos tubes, Diode, Triode, Circuit board, Logic board, Raspberry pi, LED cooler, 3D printer.
  • Widely Applications: Heavy duty two sided stick tape can be used for attach aluminum/copper heat sinks to heating element, fixed the carpet to prevent sl....
Check Stock

Thermal Adhesive Tape (40mmx10 Meters 0.3mm Thickness) Double Side Adhesive Thermal Conductive Tape for Heat Sink of LED Light,PC and More, Electrically Insulated,1 Reel Pack

  • Thermally conductive adhesive tape is made of advanced thermal conductive PSA. They satisfy the demand of high adhesion and excellent thermal conductive efficiency by providing a preferential heat-transfer path between heat-generating components and heat sink or other cooling devices..
  • High tacky thermal conductive PSA. Only pressure is needed to form an excellent bond and thermal interface, effectively replace the grease and mechanical fixation..
  • The performance of thermal conductivity, insulation, buffer and high tacky make it as the best choice for electronic application..
  • Flexible and conformable. Ideal for uneven surfaces..
  • Widely used in: Assembly of LED light bar module and metal frame bezel. Assembly of DDR-RAM module and heat sink. Electronic components - IC, COP, CPU, MOS, etc. M/B, PS, PCB, LCD, PDP, PC, etc..
Check Stock

3M 425/SI160 Scotch 425 Aluminum Foil Tape: 1" x 60 yd, Silver

  • 3M Aluminum Foil Tape 425 has excellent heat and light reflection to protect against high temperature and ultraviolet (UV) degradation. It’s also an effective barrier against moisture, dust, flame, dirt and mild chemicals used in paint stripping and masking..
  • The thermally conductive backing of 3M 425 helps maximize efficiency by dissipating heat over a wider surface area. The synthetic acrylic adhesive provides superior temperature, U.V., and solvent resistance to produce a strong, lasting and reliable bond. It provides excellent age life and is ideal for harsh, long-term indoor and outdoor environments..
  • Uses and applications include aircraft paint stripping masking (approved by the Department of the Navy Technical Order TO 1-1-8), moisture barrier in “white goods” appliances, general-purpose heat reflector and heat dissipator, mechanically holds wires and cooling coils in “white goods” appliances, and more. Carrier/Backing: aluminum foil. Adhesive: synthetic acrylic. Thickness: 4.6 mils (carrier, adhesive) 2.8 mils (carrier)..
  • Adhesion: 47 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal). Service/Operating Temperature: -65F to 300....
Check Stock

3M 425/SI260 Scotch 425 Aluminum Foil Tape: 2" x 60 yd, Silver

  • 3M Aluminum Foil Tape 425 has excellent heat and light reflection to protect against high temperature and ultraviolet (UV) degradation. It’s also an effective barrier against moisture, dust, flame, dirt and mild chemicals used in paint stripping and masking..
  • The thermally conductive backing of 3M 425 helps maximize efficiency by dissipating heat over a wider surface area. The synthetic acrylic adhesive provides superior temperature, U.V., and solvent resistance to produce a strong, lasting and reliable bond. It provides excellent age life and is ideal for harsh, long-term indoor and outdoor environments..
  • Uses and applications include aircraft paint stripping masking (approved by the Department of the Navy Technical Order TO 1-1-8), moisture barrier in “white goods” appliances, general-purpose heat reflector and heat dissipator, mechanically holds wires and cooling coils in “white goods” appliances, and more. Carrier/Backing: aluminum foil. Adhesive: synthetic acrylic. Thickness: 4.6 mils (carrier, adhesive) 2.8 mils (carrier)..
  • Adhesion: 47 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal). Service/Operating Temperature: -65F to 300....
Check Stock

Kirecoo Copper Tape, Copper Foil Tape (2inch X 33 FT) Copper Foil with Conductive Adhesive for Guitar, EMI Shielding, Crafts, Electrical Repairs and Grounding

  • Strong Adhesive - Kirecoo copper tape [2inch, 33FT], The copper foil tape conductive adhesive is super sticky and is protected with an easy peel backing which make it can be used on most surfaces & is able to withstand all weather conditions..
  • Highly Conductive - Our copper foil uses a highly conductive material with low resistance, has dual conductivity so current will flow through both sides and the adhesive. No need to worry that the copper tape conductive adhesive will reduce the effectiveness between components, making our emi shielding foil a excellent option for electrical projects, repairs and even paper circuits. Excellent alternative to conductive paints..
  • EMI & RFI Shielding - This copper foil tape with conductive adhesive Shielding electric guitar to avoid interference, shield the pickup and control cavities of a guitar. Prevent radiating and interfering, making it an ideal guitar shielding tape option. Perfect for any guitar builder/ luthier..
  • Good helper for gardening - This copper tape can for slugs. You can wrap copper tape around the base of small plants Works for keeping slugs & snail away! See....
Check Stock

uxcell Heat Resistant Tape - High Temperature Heat Transfer Tape Aluminum Foil Adhesive Tape 55mm x 20m(66ft)

  • Material: durable aluminum foil and silicone..
  • One-side self-adhesive design. Heat resistance: Instantaneous:about 300C / 572F.
  • Increases temperature efficiency, making this dryer foil tape great for insulation, heat sinks, AC-units, heaters and vents..
  • Chemically resistant, thermally conductive (helping cooling/heating efficiency), heat and light reflective..
  • This Metallic Furnace Duct Tape for HVAC is great for sealing hot and chilly air ducts, repairing metal seams and insulating aluminum duct pipes..
Check Stock

tifanso 2PCS Copper Tape with Dual Side Conductive Adhesive, Copper Foil Tape, Copper Foil Tape for Stained Glass, EMI Shielding, Electrical Repairs (1/4inch)

  • Double-sided Conductive - Our copper tape is dual side conductive, it is competent that soldering, grounding or minor repairs can be very good. Copper foil tape is also do the good job on transformer, mobile phone, computer, printer, PDA, PDP, etc..
  • Stained Glass Production - Copper foil tape for stained glass is perfect for stained glass projects. This copper foil tape was sticky and malleable and worked very well on stained glass. Copper tape conductive adhesive is easy to peel and bend arbitrarily. This stained glass supplies fits to any angle, easy to stick to your stained glass..
  • EMI Shielding - Copper foil tape is a good helper to isolate the hum or buzz which come from speaker system or your guitar, good copper foil shielding tape for guitars. If you fed up with noise or your small electronics was electromagnetic interference, this conductive tape can help you..
  • Ideal for Education and Crafts - Copper tape conductive adhesive is a good choice for introducing science to children, it possess highly conductive, the children can use it to make paper circuits. Besides, copper foil with great adhesive, easy to use and stic....
Check Stock

Copper Tape [2 Inch x 33ft] Copper Foil Tape Conductive Adhesive for EMI Shielding, Guitar Cavity, Electrical Conductive for Soldering, and More

  • Strong Adhesive - Here is our copper conductive tape [2inch, 33ft], that will come in handy for various DIY & Creative projects. The copper tape conductive adhesive is super sticky and is protected with an easy peel backing for long-lasting use..
  • Highly Conductive - Our copper shielding tape uses a highly conductive material with low resistance, making our emi shielding foil a practical option for electrical projects, repairs and even paper circuits..
  • EMI & RFI Shielding - Our copper foil tape with conductive adhesive is a simple & effective solution for EMI & RFI Shielding. The EMI Foil is perfect for removing any interference & buzzing sounds from electrical devices, making it an ideal guitar shielding tape option..
  • Get Creative - Our copper tape adhesive is a desirable choice for decorating your home, making personalised wall vinyl’s, jewellery, stainless glass & more. The electrical shielding tape can also be coupled with a soldering iron for a smooth professional finish..
  • Indoor & Outdoor Use - Our copper tape can be used on most surfaces & is able to withstand all weather conditions. We truly believe our copper tape is the best in the marketplace and we stand by that. If you can resist our electrical shielding tape, we’ll FULLY REFUND YOU. So, ....
Check Stock

Copper Tape Conductive Adhesive [1 Inch x 66ft] Copper Foil Tape for EMI Shielding Barrier, Guitar Cavity, Electrical Conductive for Soldering, Stained Glass, and More

  • Strong Adhesive - Here is our copper conductive tape [1inch, 66ft], with super sticky adhesive, and protective backing for long-lasting use. The best copper shielding tape on the market.
  • Highly Conductive - Our copper foil tape with conductive adhesive uses a highly conductive material with low resistance, making our emi shielding foil a practical option for electrical projects, repairs and even paper circuits..
  • EMI & RFI Shielding - Our electrical conductive tape is a simple & effective solution for EMI & RFI Shielding. The EMI Foil is perfect for removing any interference & buzzing sounds from electrical devices, making it an ideal guitar shielding tape option..
  • Get Creative - Our copper tape adhesive is a desirable choice for decorating your home, making personalised wall vinyl’s, jewellery, stainless glass & more. The electrical shielding tape can also be coupled with a soldering iron for a smooth professional finish..
  • Indoor & Outdoor Use - Our copper tape can be used on most surfaces & is able to withstand all weather conditions. We truly believe our copper tape is the best in the marketplace and we stand by that. If you can resist our electrical shielding tape, we’ll FULLY REFUND YOU. So, click “Add t....
Check Stock