Reviews Thermal Lance Ripper

BEADNOVA Seam Ripper 4pcs Stitch Eraser Thread Cutter Small Clothes Tag Remover Seam Rippers for Sewing Crafting Thread Removing (4 Colors)

  • SMALL SIZE SEAM RIPPER: Small size seam ripper works well with more delicate fabrics and threads. Seam ripper comes with a clear cover to give the protection to your hand when you carry it. Stitch ripper measures 3.54 inch / 9cm in length including protective cover..
  • ASSORTED COLOR PACK: 4 colors (blue, green, yellow and red) in a pack, 1pc per color. Total 4pcs seam ripper per pack..
  • HIGH GRADE MATERIAL: The seam ripper is made of high grade metal blade and plastic handle which allow thread removing job done quickly and easily. A red ball point gives the protection to the fabric when using the thread remover..
  • EASY TO USE: Insert the pointed tip of the seam ripper into a stitch that needs to be removed. Allow the stich slips down and reaches the curved blade in the middle, push the seam ripper a little more so the blade cuts through the stitch..
  • WIDE APPLICATIONS: Seam ripper is must-have for pulling out mistake stitches in sewing and crafting projects, removing unwanted embroidery, zig-zags or overlock stiches. Use stitch ripper is a handy tool to turn out tiny corners, cut open buttonholes, poke neat holes in fabric, remove clothes tags etc..
Check Stock

Johnson Level & Tool RTS24 RockRipper with Structo-Cast Head & Perforated Aluminum Blade, 24", Silver, 1 Blade

  • SCORING SQUARE: This drywall square has a board guide and a hand grip to guarantee your work progresses smoothly and efficiently. While the perforation on its 24" blade enables rapid and efficient scoring..
  • ALUMINUM BODY: No worksite is too difficult for this measurement tool. Its blade features extruded aluminum construction that ensures long lifespan.
  • high impact Structo-Cast head withstands the harshest worksite conditions..
  • SCREENED GRADUATIONS: Even in low-light settings.
  • screened black 1/8" and 1/16" graduations shall be easy. The dual-scale extends the reading to 48"..
  • APPLICATIONS: The USA-made rock ripper drywall square performs exceptionally well in drywall hanging. Its perforated blade makes scoring drywall tasks much easier..
  • PRODUCT FEATURES: This 24’’ square has a permanent 90° molded Structo-Cast head.
  • scribing/scoring notches for knife or pencil.
Check Stock

LEGO Nexo Knights Lance's Twin Jouster 70348 Fun Toy for Boys and Girls

  • Lance's Twin Jouster features flip-out wings with four flick missiles, detachable wing jet pack with shield holder, two minifigure cockpits, exhaust and two detachable lances.
  • Includes three minifigures: Lance, Lance Bot and a Rogue.
  • Lance's Twin Jouster with wings folded measures over 2" (7cm) high, 11" (29cm) long and 3" (9cm) wide, and over 10" (27cm) wide with wings flipped out.
  • Lance's Jouster bike measures over 1" (4cm) high, 9" (25cm) long and 1" (4cm) wide, Lance bot's wing jet pack measures over 2" (7cm) high, 8" (22cm) long and 10" (27cm) wide.
  • Watch all your favorite NEXO Knights characters on Cartoon Network.
  • This fun children's toy also includes Rogul’s lightning sword and Lance’s shield holder..
Check Stock

GRR-RIPPER 1/2

  • 1/2" Replacement Leg for your GRR-RIPPER.
  • Fits any and all existing GRR-RIPPER models.
  • Perfect for when you accidentally cut into and trim your GRR-RIPPER legs.
  • Cutting into the GRR-RIPPER is better than cutting into your hands!.
Check Stock

GRR-RIPPER Complete Double Pack Limited Addition by MICROJIG

  • Two-Pack. Each GRR-Ripper Advanced 3D Complete kit includes a GRR-Ripper Advanced 3D Pushblock, 1/8" Leg Accessory, a Gravity Heel Kit, a Handle Bridge Kit, and a Deflector/Connector Kit..
  • GRR-Ripper Advanced 3D Pushblock features Micro Jig's proprietary non-slip Green GRR-RIP textured gripping surface for greater control.
  • 3 legs for multi-directional stability and control.
  • a stabilizing plate to lock your material against the fence to keep your work square and flush.
  • an adjustable spacer that gives you 54% more gripping surface and 1" of additional cut capacity to take on your biggest projects and wider cuts.
  • and an adjustable handle for maximum comfort..
  • GRR-Ripper 1/8" Leg Accessory attaches to pushblock body or side leg to allow for safe, accurate, and consistent ripping of 1/8" thin strips. Gravity Heel Accessory features auto-retracting technology for reducing blowout. Provides a secure backing to routing operations and can be used as a template for repeat routing. Exceptional with long stock -- the heels grab the tail end of your board and automatically retract mid-board. Includes 5 heels, 2 heel spacers and mounting hardware..
  • Gravity Heel Accessory features auto-retracting technology for reducing blowout. It provides a....
Check Stock

LEGO Nexo Knights Jestro's Evil Mobile Kit (658 Piece)

  • Jestro's Evil Mobile features 2 translucent catapults, movable cockpit and jaws, prison, storage chest and attachable Sparkks monster.
  • Roll the vehicle forward to make the Evil Mobile's jaws open and close, use the catapult to launch lava rocks at Lance Richmond.
  • Includes 2 minifigures: Lance Richmond and Jestro, weapons include Jestro's magical staff, Lance's NEXO Lance and Sparkks' scythe.
  • Jestro's Evil Mobile measures over 9" (25cm) high, 10" (26cm) long and 6" (17cm).
  • Detach Sparkks from the vehicle and put him into battle against Lance Richmond.
Check Stock

NorthStar Electric Cold Water Portable Pressure Washer Power Washer - 1700 PSI, 1.5 GPM, 120 Volt

  • 1.5 HP Leeson motor operates on dedicated 120V/15A circuit.
  • Comet AXD direct drive triplex pump w/brass manifold and ceramic plungers.
  • 25-ft. black high-pressure hose w/ 22mm thread-on couplers.
  • Thermal protector, downstream injector, 15deg and soap quick-couple nozzles.
  • Rear entry gun and 3-ft. lance with quick connect.
Check Stock

Ripper Street (Series 1-3) - 6-Disc Set ( Ripper Street - Series One, Two & Three (24 Episodes) ) [ Blu-Ray, Reg.A/B/C Import - Netherlands ]

  • Ripper Street (Series 1-3) - 6-Disc Set ( Ripper Street - Series One, Two & Three (24 Episodes) ).
  • Ripper Street - Series One, Two & Three (24 Episodes).
Check Stock

Cooler Master AMD Wraith Ripper ThreadRipper TR4 High Performance CPU Air Cooler, Addressable RGB Threadripper logos display, 7 Heat Pipes, Dual Tower Heatsink, Wraith Armor Air-Guide

  • Designed & Optimized for Socket TR4Features a larger contact surface area that is specifically tailored for Ryzen Thread ripper.
  • Dual Tower Heatsink A combination of two sets of heatsink covers more surface area and dissipates heat more efficiently. The jet black paint enhances cooling performance.
  • Build-in Wraith Ripper RGB Software with our exclusive partnership Cooler Master and AMD designed a software that allows you to take full control of your rig's lighting..
  • Easy TR4 Mounting System Exclusive All-In-One TR4 mounting design for easy installationDescriptionThe Wraith Ripper is a product developed through an exclusive collaboration between Cooler Master and AMD. The MASTERFAN PRO 120 SERVO, seven Copper Heat pipes Air Cooler is designed to keep the AMD's 2nd Generation Ryzen Thread ripper CPUs cool under any computing condition. The dual tower heatsink covers more surface area. Creating a more effective way of dissipating heat. The Wraith Ripper's elegant Addressable RGB lighting, puts the power of creating the best lighting in your hands. The TR4 mounting system makes it the easiest Thread ripper cooler to install. The four long screws on the top of the air cooler gives you the easiest way to install on the TR4 bracket..
Check Stock

Penn State Industries PKSRSS Chrome Seam Ripper Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED SEAM RIPPERS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (4) Chrome Seam Ripper Woodturning Project Kits. You will receive (2) of each of the following: Single Small Blade Seam Ripper Kits in Chrome (PKSR1) and Large & Small Blade Seam Ripper Kits in Chrome (PKSR2).
  • Also includes the bushing set (PKSRBU) needed to make the seam rippers.
  • Minimum blank size needed to turn is 3/4" x 3/4" x 3-1/2".
  • Blades are removable and reversible for protection and storage.
  • The handle you 'turn' is compatible with all seam ripper, crochet, stiletto, and needle threader kits from Penn State Industries.
Check Stock