Reviews Test Sphere Probe Manufacturers

Universal Oscilloscope Probe with Accessories Kit 100MHz Oscilloscope Clip Probes

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 100MHz,Usable with Scopes having Bandwidth up to 100 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Hantek PP80B 2pcs Oscilloscope Scope Clip Probe 1x:10x Oscillograph Rapier 80MHz

  • Universal Oscilloscope Probe 10:1 and 1:1 Switchable Bandwidth 200MHz,Usable with Scopes having Bandwidth up to 200 MHz.
  • Interchangeable Probe Tip.High Sensitivity, Excellent Performance and Reliable Function.
  • Fully-Shielded Welded BNC Connector, Small Signal Interference.
  • Pure Copper Plated Gold Pin for Good Contact Test Versatility and Capability..
  • Used with Oscilloscopes from All Manufacturers , Equipped with The Standard BNC Connector..
Check Stock

Proster 100 MHz Oscilloscope Clip Probes with BNC to Mini Grabber Test Lead Kit BNC to Mini-Grabber Clips Oscilloscope Probe

  • Universal Oscilloscope Probe: 10:1 and 1:1 switchable bandwidth 100MHz, suitable for oscilloscopes from all manufacturers , equipped with the standard BNC connector.
  • Test lead of a BNC connector to 2 mini-grabber clips: 48 inch mini-grabber clips coded in black and red, keep this handy lead on hand for your next electronics project.
  • High Sensitivity: Fully shielded welding BNC connector, less signal interference.
  • pure copper plated gold pin, less contact resistance and good contact performance.
  • Interchangeable Probe Tip. High Input Impedance (X10 Range). Low power consumption and energy-saving.
  • Suitable for all digital oscilloscopes and analog oscilloscopes voltage detectors to test circuit.
Check Stock

OIIKI 4Pcs 0.7mm Test Probe Pins Non-Destructive Insulation Wire Piercing Needle Stainless Steel Back Probe Pins Super Tip Multimeter Probes for Banana Socket Plug Car Tester Black&Red

  • Connection Model: The test probe fits for standard 4mm Banana plug test lead, it works with most test lead kits in the field, diagnostic devices and automotive testing and repair..
  • The test probe makes it easier to check circuits and piercing the insulation of wires, very handy tools for back probing of automotive electrical measurements..
  • Length: about 3.27inches (83mm), Probe pin size: about 0.86inches (21.8 x 0.7mm), Pin material: stainless steel..
  • Wide application: The test probe applications include automotive, industrial, electrical and more, which could perfect fit on many multimeter connectors..
  • Package included: 2 × black test probe pin, 2 × red test probe pin..
Check Stock

AUTOOL Power Probe Circuit Tester 9-30V Automotive Power Circuit Diagnostic Tool Car Fuse Relay Electrical System Tester Digital Voltage Short Finder Thermometer for Vehicle Cable Length 3.6Ft

  • 【Widely Applicable】 The AUTOOL BT210 power circuit probe tester is specially used for maintenance and detection of 9-30V DC automobile circuits, which can quickly eliminate problems in the process of vehicle troubleshooting. Applicable to all types of vehicles, including automobiles, trucks, motorcycles, etc..
  • 【Easy to Operate】 The circuit probe tester is easy to operate, and all operations can be completed with only two buttons. Briefly press the "M" key on the probe tester to switch five test modes. Briefly press the "Lighting" button on the probe tester to turn on or off the light beside the probe..
  • 【Five Modes Optional】 Multi-function Mode: digital display voltage measurement, on-off test, positive and negative pole test. Voltage Test: digital display voltage measurement. On-off Test: can detect open circuit, path, virtual circuit and real circuit. Positive and Negative Pole Test: determine the positive and negative poles. Temperature Test: the pointer is equipped with a temperature sensor to detect the temperature of the specified contact..
  • 【Excellent Design】 The design of this power short circuit probe is exquisite and compact, only 0.2 pounds, easy to carry and operate. The length of the wire is about 3.6 ft, which can cover the e....
Check Stock

Tool Aid SG 25100 Short Tester

  • Transmitter and Receiver LEDs indicate open or short circuit situations, making them simple to use..
  • On/Off, Test, and Probe length buttons on the receiver "supple probe.
  • Receiver: On/Off button / Test button / Probe length: 7" flexible probe.
  • Tone/Continuity LEDs (61cm length, approximate).
Check Stock

Circuit Breaker Finder Find Breakpoints, Automotive Circuit Tester with 75CM Test Lead, Electrical Wire Tracer Find Short Circuits, Circuit Tracer with Earphone & Handbag, Electrical Tester

  • ...all 6V to 24V DC vehicle electrical systems. It can check switches, relays and the on-off of diodes, fuses and circuits, which can help you reduce diagnostic time in automotive electrical systems. In most cases, short circuit or instant overload of component will lead to blown fuse or circuit breaker tripping.This probe tester can assist you tracing problem wires and locating breaking points..
  • 【Polarity Identification & Continuity Testing & Jumper Lead Operation】This power circuit probe tester can help you quickly identify positive and negative polarity of electric cables and plugs of vehicles. When the probe tip contact to the positive electrode, the RED light on. When the probe tip contact to the negative electrode, the GREEN light on. It can also test for continuity and do the jumper lead operation with the assistance of its auxiliary ground lead..
  • 【Activate and Test Components In/Out of Vehicle’s Electrical System&Poor Ground Contact Testing】Power circuit probe tester could activate components in and out of the vehicle’s electrical system, test and check the components if defective or not, or if rating current of component is higher than that of the circuit tester. For some components, the negative terminal is required to be well groun....
Check Stock

4 Pieces Flexible Back Probe Pins with 4 mm Stackable Banana Socket for Car Repairing Electrical Testing

  • Quality conductivity material: the back probes use stainless steel as material which can performance well in conductivity, the bendable part is made....
  • Non dstructive: the test needle is flexible and can bent with different angle which adapt for measure hard to reach areas during testing.
  • Wide range of usages: the test probe suits well for standard 4 mm Banana plug test , it works with most test kits in the field, diagnostic devices,....
  • Size information: the size of the tipped tip probe is about 3.5 cm/ 1.4 inch, enough length to meet your needs.
  • It has very nice sensitivity, accuracy....
  • Package included: the package comes with 2 pieces black test probe pins, 2 pieces red test probe pins.
  • They are also the practical gift choice for....
Check Stock

Test Leads Set, 22 in 1 Multimeter Test Leads with Electrical Alligator Clips, Soft Silicone Test Leads Probes

  • digital Multimeter Test Lead Flexible Safety Specialties kit Probe Alligator Accessorie.
  • 0.7MM-1MM Sharpeset test probe hook clip.
  • Full Insulated Safety Crocodile Alligator Clips.
Check Stock

Goupchn High Voltage Oscilloscope Probe P4100 with Accessory Kit 100MHz 2000V 100:1

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • High voltage probe can withstand 2000V. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • High voltage oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 1 x probe, 8 x marker rings, 1 x ground spring, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock