Reviews Test Plugs

Spark Plug Tester 0 to 6000rpm Adjustable Spark Tester with Two Spark Plug Socket 100-240v with Protective Cover Ignition Tester Heat Resistance Spark Tester Automotive Tools for 12mm Spark Plug

  • 【Dual Hole Testing & Protective Cover Protection】Spark plug tester has two spark plug socket,it can test two spark plugs (good spark plug & bad spark plug) at the same time.By comparing the spark intensities of the two spark plugs,judge the performance and ignition intensity of the spark plugs,and replace the broken spark plugs in time.The design of the protective cover can prevent you from the risk of electric shock during the test,which effectively guarantees your safety during the operation..
  • 【0~6000rpm Working Frequency Adjustable & More Accurate Data】The automotive tools has a wide adjustment range of working frequency.By operating the rotary switch,you can adjust the working frequency in the range of 0~6000rpm,the higher the set frequency,the stronger the spark intensity.Spark plug tester can also simulate the work of the engine,restore the authenticity of the car rotate speed,save time and high efficiency,and the data is more accurate,which can better test the spark plug..
  • 【High-Quality ABS Material With Impact Resistance & Heat Resistance】Ignition tester is made of high-quality ABS material,which has the characteristics of impact resistance and heat resistance.It can provide you with long-term service and reduce the cost caused....
Check Stock

AstroAI 8Pcs Multimeter Test Leads Kit,Digital Multimeter Leads with Alligator Clips and Plunger Test Mini Hooks Test Probes 1000V 10A CAT III & CAT IV 600V for Multimeter, Voltmeter, Clamp Meter

  • MULTIMETER TEST LEADS KIT: All 8 pieces with three different connectors help to test various on different occasions, including 2 X alligator clips with removable insulation, 2 X extended range plunger mini-hooks with pass-through banana plugs, 2 X heavy duty test probes, 2 X 42” lead extensions..
  • HEAVY DUTY: It is safer to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fitting all kinds of multimeters like digital multimeters, voltmeter, clamp meters and so on..
  • COMPATIBLE: Multimeter test leads are designed for use with any multimeter, clamp meter,voltmeter or test instrument.Universally compatible with either 0.16” banana plugs or shrouded banana plugs on all ends..
  • HUMANIZED DESIGN: Removeable PVC insulation on the alligator clips protect it against dust and oxidation.Thin and sharp testing probes for easier use with very tight spaces. Longer probe tips for greater ease of use..
  • VERSATILE KIT:Soft and Durable Hand Grips, Heat,and cold-resistant test probes are silicone insulated and provides comfort and safety.All test leads complies with IEC/EN: 61010 standards..
Check Stock

Audio Speaker Cable Connector,20 Pcs 4mm Audio Speaker Wire Cable Screw Banana Plug Connector Black&Red

  • Banana plug diameter: 4 mm.Screw connector fitting, no soldering needed Standard size fits most speakers.
  • The plugs can be stacked with existing 4mm banana plugs..
  • The banana plugs will connect from 2mm up to 5mm diameter speaker wire.
  • Great tools for using in the audio equipment, industrial instrument,power test and automobile test..
Check Stock

Goupchn Multimeter Test Leads Kit Back Probe Set with Replaceable Probes Set Banana Plug to Test Hook Leads Alligator Clips and Wire Piercing Probes for Electrical Testing Automotive Diagnostic

  • Multimeter test leads with 4mm standard safe banana plugs are made of high quality copper material which have strong conductivity, low resistance and no signal loss. Leads: CAT III 1000V,10A. Length: 3.3ft/1m..
  • Banana to alligator test leads are made of high quality copper material which are soft, flexible and durable. 4mm standard banana plugs can fit most multimeters. Copper alligator clips provide stronger conductivity and clamping force. Length: 3.3ft/1m. Rated current: 5A..
  • Wire piercing probes can be easily connected with the 4mm banana plug test leads. Perfect for wire piercing. No need to strip off the cables and no damage to the cables. Textured non-slip design enhances your comfort. High reliability and long service life..
  • 57PCS multimeter test leads back probe kit can be used not only for electrical testing, automotive diagnostics, testing and repairing, but also in physics laboratories, schools, homes and industries. Replaceable probes, banana plugs, alligator clips, wire piercing probes and test hook clips can help expand testing capability and flexibility..
  • List: 5PCS banana to alligator test leads, 2PCS multimeter leads, 8PCS replaceable probes set, 2PCS inner spring short needles, 2PCS banana to test hook wires, 15PCS back probes set, 5PC....
Check Stock

Spark Plug Tester Dual Holes Engine Ignition Coil Tester 500-6000rpm Working Frequency, Car Spark Plug Tester Tool with Protective Cover, Automotive Spark Plug Tester for 12V Gasoline Vehicles

  • ...cy, the stronger the spark intensity. It can be adjusted as needed..
  • 【Time-Saving and Efficient Spark Plug Tester】The working principle of the car spark plug tester is to test the performance of the spark plug at the same time by simulating engine work, which is more time-saving and efficient. Suitable for spark plugs of most 12V gasoline cars..
  • 【Plug-and-Play Spark Plug Tester Tool】Put the spark plug in the test hole, close the protective cover, connect the power supply and adjust the working frequency, and is equipped with a high-voltage indicator. You can easily observe the spark plug test status through the protective cover..
  • 【Ignition Coil Tester with Protective Cover】The automotive spark tester has a special protective cover design. Cover the protective cover before use to ensure the safety of the operator during the test and visually observe the test results..
  • 【NOTE】This spark plug tester tool is specially designed for testing spark plugs of automobile engines. Not suitable for testing the short plugs of lawn mowers, chainsaws or most small engines..
Check Stock

Hantek HT30A Heavy Duty Automotive Test Lead 3M BNC to Banana Adapter Cable

  • Hantek Heavy Duty Auto Test Lead/BNC to Shrouded Banana Plugs(Male) or Banana sockets (Female) Adapter/jumper Cable.
  • One side of the cable is a standard BNC Connector.
  • It get split into two Shrouded Banana Plugs and two banana sockets so a wide Range of Probes, Clips and Gators can be plugged into them.
  • This cable can serve other purpose as well..
  • The auto test cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
Check Stock

Goupchn Multimeter Test Leads Kit with Alligator Clips Wire Piercing Probes Banana Plug to Mini Grabber Test Hook Clips Wire Replaceable Precision Sharp Probes Set for Electrical Testing

  • Excellent Quality: Multimeter test leads with 4mm standard safe banana plugs are made of high quality copper material which have strong conductivity,....
  • Replaceable: Multimeter test leads set contains 4pcs 2mm copper needles and 4pcs 1mm gold-plated sharp needles. They can be switched to meet your....
  • Minigrabber: Copper alloy test hook clips are different from traditional. Higher quality and softer. The inner diameter of the copper wire is 1 cubic....
  • Wire Piercing: Wire piercing probes are made of stainless steel which can piercing the wires without damage. Probe thickness: 0.7mm. The other end is....
  • Wide Use: Multimeter test leads kit works perfectly with any multimeter and test instrument. Replaceable probes, banana plugs, alligator clips,....
Check Stock

AideTek Automotive Test Lead Kit Insulation Piercing test clip TLP20160

  • Two( One red + one black) 32 inch PVC lead extensions, Shrouded banana plugs at both ends, Whole length: 82cm (32.22 inch).
  • A pair of sharp Stainless Steel Needle Tipped Tip Multimeter Probes Test Leads.
  • Two ( one red + one black) modular 4 inch heavy duty test probe handles.
  • A pair of one Black/Red large crocodile clips, Safety Sliver plated alligator clip Rated voltage/current: CATIII 1000V/Max.32A, Metal material：Brass.
  • whole size: 83.5mm(3.3 inch) max jaw size: 27mm(1.06 inch).
  • Insulation Piercing Clip Set, Banana Jack Accepts Banana Plug Leads with rigis insulation sleeve, Color: Red, Black, Length 4 In" (143cm) , Stainless Steel Probe Pierces Insulation on Gauge Wire, Tip Material Stainless Steel, For Use With Banana Plug Test Leads, Accepts 4mm Banana Plugs, Includes (1) Red and (1)Black Probe.
Check Stock

Mechanical Test, Seal & Cleanout Pipe Plug, 3 9/16" to 4 1/8" Winterizing Pool Plug, Anti-Return Pipeline Plugging, Expandable Rubber Stainless Steel Marine Boat Drain Plug T-Handle

  • 【Convenient, Practical & Leakproof Plugs】The BOPOREAE T-Handle Drain Plug is a twist/turn pipe plug for a leak proof seal. The Premium Stainless Steel and Nitrile Butadiene Rubber (NBR) construction makes this rubber hole plugs resists heat, anti-freeze, oil and rust inhibitors, wear-resistant, wet-dry versatile and airtight.
  • 【What Is This Plug Used For?】This Universal Rubber Expansion Plug is an Adjustable Stainless Steel Scupper Plugs which can replace any standard 1" to 4 1/8""(25-105mm) test and seal plug for various Drainage Hole&Pipe Opening.
  • Round rubber pipe plugs can be used for Low Pressure & Leakage Test, Drain Pipe Sealing & Clean-Outs for Kitchen, Bathroom, Garden, Automotive, Construction Industry, Kayak and Marine Boats, etc..
  • 【How To Use?】The BOPOREAE pipe hole plug seal installs easily, no tool required. Turn the handle clockwise the rubber will be squeezed and expanded until the hole is clamped forming a leak-proof seal.
  • Turn the handle counterclockwise the rubber plugs returns for easy removal and next installation.
  • You will love this premium practical and convenie....
Check Stock

Fluke TL175 Twistguard Test Leads, 2 mm Diameter Probe Tips

  • Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements.
  • New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation.
  • inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement.
  • TL175 test leads withstand high temperatures and remain flexible in cold temperatures.
  • Extra heavy duty strain relief on both probe end and plug end, tested beyond 30,000 bends without failure.
  • Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs.
Check Stock