Reviews Test Data Instrumentation

4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino

  • ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13-bit), measurement at up to ± 16g. Digital output data is 16-bit twos complement format, can be accessed via I2C digital interface or SPI (3-wire or 4-wire)..
  • The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °.
  • Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption..
  • Appliactions: It can used in Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming..
  • ULTRA LOW POWER: as low as 23 μA in measurement mode and 0.1 μA in standby mode at VS = 2.5 V (typical)..
Check Stock

Autel (AULAL629) AL629 ABS/SRS/Engine/Transmission Code Reader

  • This code reader can quickly read and erase DTCs for ABS, SRS, Engine and Transmission on most 1996 and newer (OBDII & CAN) – domestic and import major vehicle models.
  • Auto VIN for quick DTC definitions, search DTC definition library for code breaker information, I/M readiness monitors, on-screen DTC definitions. Supports all 10 test modes of latest J1979 OBDII. Enhanced mode 6 Diagnostics, O2 monitor test/on-board monitor test & component test/oxygen sensor test..
  • Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes. Retrieves vehicle information (VIN, CIN, CVN). Views freeze frame data and graph data. Reads, stores and plays back live PCM data stream and live sensor data..
  • AutoLink AL629 is easy to use, this scanner can work directly once the OBDII main cable is plugged in. Easily determines the cause of the Check Engine Light/ Malfunction Indicator Light (MIL). Turns off Check Engine Light, clears codes and resets monitors..
  • 2.8’’ LCD with 320x240 resolution, lifetime free updates, TF memory card for data backup and software update, can print data via Windows PC. Multilingual support – English, Spanish, French, etc..
Check Stock

OBDII Trouble Codes

  • CEL DOCTOR: The NL101 is used to read and clear fault codes and turn off the engine light. It can not only accurately determine codes and possible causes, but also perform DTC search, O2 sensor test, I/M readiness test, on-board monitor test, live data stream, freeze frame data, EVAP system test, vehicle VIN retrieval and diagnostic report, saving vehicle owners a lot of time and money in maintenance..
  • SMOG CHECK HELPER: It can accurately read trouble codes for most cars, SUVs, light trucks, and 12-volt diesel vehicles equipped with a 16-pin OBD2 protocol. Use this OBD2 scanner to make sure the monitor is set before the emission test, so you can pass the emission test easily..
  • BATTERY TEST: Supports real-time battery voltage acquisition and displaying the results in a graph. This allows you to retrieve and analyze the exact live data and determine the condition of the battery or the expected remaining life..
  • INDISPENSABLE HOME TOOL: Requires no batteries or charger, but is powered directly from your vehicle's 16-pin OBDII Data Link Connector. It is an indispensable tool in your toolbox and one of the best gifts for home and auto mechanics..
  • WORTH TO OWN: A free $20 protective case, 2.4" LCD color screen, 8+ languages, unique patented design, free lifetim....
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Wheel-Operated Manual Push Pull Test Stand Stroke 180mm/7\ with Digital Scale and HJJ-001 Clamp x2 (HLD Test Stand+HP-500N)

  • USB DATA OUTPUT - The Digital Force Gauge 500N can store up to 999 sets of PEAK test data. You can use the attached CH340 chip USB data cable to connect to a laptop and export real-time measurement data..
  • FREE SOFTWARE - We provide free software that can export test data or charts (force versus time curve). You can contact us to get the software. Mxmmonfree provides a 365-day warranty service and free technical support..
  • VARIOUS ACCRSSORIES - Digital Force Meter comes with Compression test parts *4, Tenslie test part *1, Extension rod *1, which are able to meet most of simple tests. The gauge and various accessories can be put into the carrying case for convenient storage. Test Sand comes with screws for installing the gauge and 2 pcs HJJ-001 Clamp for tensile tests..
  • DIGITAL DISPLACEMENT SCALE - This HLD Test Stand has a digital displacement scale (no output function), which can help you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm.
  • GAUGE PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: Input (AC 100-240V 50-60Hz), Output (DC 5V 0.5A) | 2 sets of Installation Dimens....
Check Stock

Planes, Trains & Automobiles

  • CEL DOCTOR: The NL101 is used to read and clear fault codes and turn off the engine light. It can not only accurately determine codes and possible causes, but also perform DTC search, O2 sensor test, I/M readiness test, on-board monitor test, live data stream, freeze frame data, EVAP system test, vehicle VIN retrieval and diagnostic report, saving vehicle owners a lot of time and money in maintenance..
  • SMOG CHECK HELPER: It can accurately read trouble codes for most cars, SUVs, light trucks, and 12-volt diesel vehicles equipped with a 16-pin OBD2 protocol. Use this OBD2 scanner to make sure the monitor is set before the emission test, so you can pass the emission test easily..
  • BATTERY TEST: Supports real-time battery voltage acquisition and displaying the results in a graph. This allows you to retrieve and analyze the exact live data and determine the condition of the battery or the expected remaining life..
  • INDISPENSABLE HOME TOOL: Requires no batteries or charger, but is powered directly from your vehicle's 16-pin OBDII Data Link Connector. It is an indispensable tool in your toolbox and one of the best gifts for home and auto mechanics..
  • WORTH TO OWN: A free $20 protective case, 2.4" LCD color screen, 8+ languages, unique patented design, free lifetim....
Check Stock

AUTO METER 8463 Ford Factory Match 2-1/16

  • Factory matched LED through-the-dial lighting provides clear visibility during nighttime use and matches OEM instrumentation.
  • Includes data acquisition grade solid-state pressure transducer, providing unmatched accuracy and durability even in the harshest environments.
  • Auto Meter’s race proven digital stepper motor electric instruments provide unmatched accuracy while keeping hazardous fluids outside of the vehicle.
  • The accuracy of digital stepper motor gauges is further increased by utilizing a self calibration sequence during power up.
  • Gauge kit includes 1/8” NPT stainless steel pressure transducer, wiring harness, mounting hardware, and detailed instructions for installation.
Check Stock

Autel AutoLink AL629 Diagnostic Scan Tool for ABS SRS Engine Transmission,CAN OBDII Scanner DIY Professional Code Reader

  • CAN) – domestic and import major vehicle models, for a detailed vehicle coverage list, please contact us..
  • Auto VIN for quick DTC definitions, search DTC definition library for code breaker information, I/M readiness monitors, on-screen DTC definitions. Supports all 10 test modes of latest J1979 OBDII. Enhanced mode 6 Diagnostics, O2 monitor test/on-board monitor test & component test/oxygen sensor test..
  • Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes. Retrieves vehicle information (VIN, CIN, CVN). Views freeze frame data and graph data. Reads, stores and plays back live PCM data stream and live sensor data..
  • AutoLink AL629 is easy to use, this scanner can work directly once the OBDII main cable is plugged in. Easily determines the cause of the Check Engine Light/ Malfunction Indicator Light (MIL). Turns off Check Engine Light, clears codes and resets monitors..
  • 2.8’’ LCD with 320x240 resolution, lifetime free updates, TF memory card for data backup and software update, can print data via Windows PC. Multiling....
Check Stock

Digital Manifold HVAC Gauges Set with Pressure&Temp Test, Digital Refrigerant Gauges Built-in 89 Refrigerant Database, HVAC Gauges Set with Refrigerant Hoses,Temp Clips& 3.5″ LCD Display

  • 【Digital Manifold Gauge Set】Manifold gauge kits are used to install, test and maintain refrigeration equipment (such as air conditioners, refrigerators and cold storage, etc.). Digital gauge has very powerful functions, such as: double pressure test, dual temperature test , digital readout, multi-unit switching, multi-mode function and built-in refrigerant database..
  • 【Condensing Pressure&Temp Test of manifold Gauge】The air pressure gauge can test the minimum pressure when the refrigerant changes from gas to liquid, and the maximum temp when the gas changes to liquid. (The lower the pressure and temp of condensation are, the higher the efficiency of the refrigeration cycle and the greater the refrigerant capacity will do.).
  • 【Evaporation pressure and temperature test of manifold Gauge】The air pressure gauge can test the maximum pressure when the refrigerant changes from liquid to gas. The lowest temp when the liquid becomes gaseous.（The lower the pressure and temp of the evaporation are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do.）.
  • 【The air pressure gauge can be filled with refrigerant through the visual window & Refrigerant type can be set】Built-in 89 kinds of Refrigerant Database. B....
Check Stock

Autel AL539 Autolink OBD2 OBDII Fault Code Reader & Electrical Test Tool with a Build-in AVOmeter

  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems..
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information.
  • Support Live Data stream playback and Live Data graphing.
  • Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import..
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily..
  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, t....
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock