Reviews Test Data Ingestion

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Wheel-Operated Manual Push Pull Test Stand Stroke 180mm/7\ with Digital Scale and HJJ-001 Clamp x2 (HLD Test Stand+HP-500N)

  • USB DATA OUTPUT - The Digital Force Gauge 500N can store up to 999 sets of PEAK test data. You can use the attached CH340 chip USB data cable to connect to a laptop and export real-time measurement data..
  • FREE SOFTWARE - We provide free software that can export test data or charts (force versus time curve). You can contact us to get the software. Mxmmonfree provides a 365-day warranty service and free technical support..
  • VARIOUS ACCRSSORIES - Digital Force Meter comes with Compression test parts *4, Tenslie test part *1, Extension rod *1, which are able to meet most of simple tests. The gauge and various accessories can be put into the carrying case for convenient storage. Test Sand comes with screws for installing the gauge and 2 pcs HJJ-001 Clamp for tensile tests..
  • DIGITAL DISPLACEMENT SCALE - This HLD Test Stand has a digital displacement scale (no output function), which can help you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm.
  • GAUGE PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: Input (AC 100-240V 50-60Hz), Output (DC 5V 0.5A) | 2 sets of Installation Dimens....
Check Stock

Planes, Trains & Automobiles

  • CEL DOCTOR: The NL101 is used to read and clear fault codes and turn off the engine light. It can not only accurately determine codes and possible causes, but also perform DTC search, O2 sensor test, I/M readiness test, on-board monitor test, live data stream, freeze frame data, EVAP system test, vehicle VIN retrieval and diagnostic report, saving vehicle owners a lot of time and money in maintenance..
  • SMOG CHECK HELPER: It can accurately read trouble codes for most cars, SUVs, light trucks, and 12-volt diesel vehicles equipped with a 16-pin OBD2 protocol. Use this OBD2 scanner to make sure the monitor is set before the emission test, so you can pass the emission test easily..
  • BATTERY TEST: Supports real-time battery voltage acquisition and displaying the results in a graph. This allows you to retrieve and analyze the exact live data and determine the condition of the battery or the expected remaining life..
  • INDISPENSABLE HOME TOOL: Requires no batteries or charger, but is powered directly from your vehicle's 16-pin OBDII Data Link Connector. It is an indispensable tool in your toolbox and one of the best gifts for home and auto mechanics..
  • WORTH TO OWN: A free $20 protective case, 2.4" LCD color screen, 8+ languages, unique patented design, free lifetim....
Check Stock

Autel AutoLink AL629 Diagnostic Scan Tool for ABS SRS Engine Transmission,CAN OBDII Scanner DIY Professional Code Reader

  • CAN) – domestic and import major vehicle models, for a detailed vehicle coverage list, please contact us..
  • Auto VIN for quick DTC definitions, search DTC definition library for code breaker information, I/M readiness monitors, on-screen DTC definitions. Supports all 10 test modes of latest J1979 OBDII. Enhanced mode 6 Diagnostics, O2 monitor test/on-board monitor test & component test/oxygen sensor test..
  • Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes. Retrieves vehicle information (VIN, CIN, CVN). Views freeze frame data and graph data. Reads, stores and plays back live PCM data stream and live sensor data..
  • AutoLink AL629 is easy to use, this scanner can work directly once the OBDII main cable is plugged in. Easily determines the cause of the Check Engine Light/ Malfunction Indicator Light (MIL). Turns off Check Engine Light, clears codes and resets monitors..
  • 2.8’’ LCD with 320x240 resolution, lifetime free updates, TF memory card for data backup and software update, can print data via Windows PC. Multiling....
Check Stock

Digital Manifold HVAC Gauges Set with Pressure&Temp Test, Digital Refrigerant Gauges Built-in 89 Refrigerant Database, HVAC Gauges Set with Refrigerant Hoses,Temp Clips& 3.5″ LCD Display

  • 【Digital Manifold Gauge Set】Manifold gauge kits are used to install, test and maintain refrigeration equipment (such as air conditioners, refrigerators and cold storage, etc.). Digital gauge has very powerful functions, such as: double pressure test, dual temperature test , digital readout, multi-unit switching, multi-mode function and built-in refrigerant database..
  • 【Condensing Pressure&Temp Test of manifold Gauge】The air pressure gauge can test the minimum pressure when the refrigerant changes from gas to liquid, and the maximum temp when the gas changes to liquid. (The lower the pressure and temp of condensation are, the higher the efficiency of the refrigeration cycle and the greater the refrigerant capacity will do.).
  • 【Evaporation pressure and temperature test of manifold Gauge】The air pressure gauge can test the maximum pressure when the refrigerant changes from liquid to gas. The lowest temp when the liquid becomes gaseous.（The lower the pressure and temp of the evaporation are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do.）.
  • 【The air pressure gauge can be filled with refrigerant through the visual window & Refrigerant type can be set】Built-in 89 kinds of Refrigerant Database. B....
Check Stock

Autel AL539 Autolink OBD2 OBDII Fault Code Reader & Electrical Test Tool with a Build-in AVOmeter

  • 【ELECTRICAL CIRCUIT / STARTER / CHARGING SYSTEM TESTER】 Specially designed to diagnose the vehicle electrical system,including DC or AC voltage test, continuity test and current test. Diagnose the cranking status, and helps you to decide whether the starter voltage is normal or not, also diagnose the charging system and says: normal, low output,high output or excessive ripple.
  • 【EMISSION STATUS CHECK】 With this OBD II scanner, you can easily and clearly know your emission status and whether you can pass the smog test. I/M readiness check and O2 sensor test are the important related functions to tell you the emission problems..
  • 【COMPLETE OBDII FUNCTIONS】 Read Codes, Erase Codes, Live Data, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information.
  • Support Live Data stream playback and Live Data graphing.
  • Enhanced OBD II Mode 6, supports data printing via PC. Works on most 1996 and newer vehicles(OBDII & CAN)-domestic and import..
  • 【EXTENSIVE VEHICLE COVERAGE】 More than 80 US, Asian and European vehicle makes after 1996. Smart AutoVIN technology for identifying vehicles easily..
  • 【WARRANTY & UPDATE】 12-month guarantee and FREE software update for lifetime. TFT color display, and built-in speaker, t....
Check Stock

2 in 1 Car Battery Tester, TOPDON BT100W 12V Bluetooth Battery Tester Automotive Supported Battery Library, 100-2000 CCA Alternator Tester Digital Battery Load Tester Charging Cranking System Tester

  • Dual Testing Methods: The TOPDON BT100W car battery tester offers two ways to get accurate battery testing results – via host-side or the Bluetooth testing app. With support for battery tests, cranking tests, charging tests, and system tests, it's the ultimate testing tool for 12V 100-2000CCA lead-acid batteries (including Flooded/AGM/GEL/EFB batteries)..
  • Comprehensive Battery Library at Your Fingertips: TOPDON’s BT100W car battery tester features a battery library function that provides comprehensive battery information for almost 14,000 vehicle models. With just a few taps on the app, you can easily access critical battery information including battery type, CCA, and battery size..
  • Effortlessly Share and Save Test Reports: The TOPDON BT100W car battery tester features data synchronization and automatic test report generation. During the test, the host synchronizes the data related to the app, and the app can also synchronize the test data stored by the host via Bluetooth connection. The BT100W device and app work together to ensure seamless data transfer and make it easy for users to access and share their test results..
  • Bluetooth Testing For More Powerful Analysis: Get more out of your battery tests with the BT100W Bluetooth test mode. Experience....
Check Stock

VDIAGTOOL VD30 Car Code Reader, Enhanced Mode 6 OBD2 Scanner for Turn Off Check Engine Light, CAN Diagnostic Tool, Universal Automotive Check Engine Code Reader with One-Click Smog Check, Red

  • ➤【FULL 10 MODES OF OBDII TESTS】- VDIAGTOOL VD30 engine fault code reader performs all 10 modes of OBD2 tests on your car to catch emissions problems before they become a major concern. It can quickly read/erase codes (DTCs) and display DTC definition, view enhanced 4 in 1 live data and retrieve freeze frame, show I/M readiness status by one-click, locate bad O2 sensors, on-board monitor test, component test, retrieve vehicle information and module present. Find out the root causes of CEL..
  • ➤【ENHANCED OBDII DIAGNOSTICS】 - This VD30 OBD2 code reader supports ✅ O2 Monitor Test - Which can used to locate the bad O2 sensors and identify problems related to fuel efficiency and vehicle emissions. ✅ Mode 06 On-board Monitor Test (Check cylinder misfire) - It keeps track on how emission control components and other systems and sensors are functioning. ✅ Mode 08 Component Test (EVAP leak test) - Initiate a leak test of a vehicle's EVAP system..
  • ➤【TURN OFF CHECK ENGINE LIGHT】- Diagnostic Trouble Codes (DTCs) are sent to the vehicle's instrument panel to trigger a warning light. This check engine code reader brings a fast access to scan the car emissions-related error codes, retrieves generic codes, manufacturer specific codes, pending co....
Check Stock

OBDScar OS601 EOBD OBD2 Scanner Automotive Engine Fault Code Reader CAN Diagnostic Scan Tool (2018 Model)

  • Universal Compatibility: Applicable to MOST US-based cars (made in 1996 or later), EU-based cars (made in 2001 or later), Asian cars, and all OBD II/EOBD/CAN-compliant vehicles..
  • Smog Check: Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing.
  • turns off the MIL (check engine light) and resets monitors.
  • views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data..
  • Shows the code and what the code means directly. Able to retrieve generic (PO P2 P3 and UO) manufacturer specific (P1, P3, and U1) codes and pending codes, and vehicle information (VIN, CID and CVN). And can store the data you have viewed (DTCs, freeze Frame, live data, etc)..
  • Supports all OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN(Controller Area Network)..
  • No battery needed, just plug it into the OBDII port and start diagnosis. Features a 2.5-foot flexible plug and a 7-button panel. Supports DTC look-up, and software upgrade. One-year limited warranty..
Check Stock

Chicco Duo Hybrid Baby Bottle Nipple Stage 2 Medium Flow (3m+) 2Pk

  • INTUI-LATCH NIPPLE - Accepted by 9 out of 10 babies (2018 consumer test in Italy on 446 babies, 0-6m).
  • SHAPED TO FIT - Nipple shape positions baby's tongue and lips for a natural, intuitive latch.
  • ANTI-COLIC VALVE - For less air ingestion and baby's feeding comfort.
  • BREAST-LIKE - Flow is easy for baby to control - ideal for breast to bottle feeding. Soft silicone with skin-like texture helps baby stay latched.
  • (2) Stage 2 Medium Flow Nipples for babies 3m+ included. Free of BPA, BPS, PVC, and Phthalates. Made in Italy.
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with USB Output 500N/110Lbf/50Kgf Force Meter with Auto Power-Off, Auto Backlit LCD for Lab Tension and Compression Destructive Tests HP-500N

  • DATA STORAGE & OUTPUT - The Digital Force Gauge 500N can store up to 999 sets of peak test data. You can also connect the computer with the USB cable attached to the product to obtain real-time test data for statistics and analysis..
  • FREE SOFTWARE - We provide free software that can export test data or charts (force versus time curve). 【NOTE】If you need software, please contact us to get it after completing the order..
  • VARIOUS TEST PARTS & STORAGE CASE - Compression test parts *4, Tenslie test part *1, Extension rod *1, which are able to meet most of simple tests. The portable digital force gauge and various accessories can be put into the carrying case for convenient storage..
  • RECHARGEABLE BATTERY - The force gauge with USB output is equipped with a built-in Lithium battery and an AC adapter. When fully charged, it can be used continuously for about 6 hours, and each charge cannot exceed 12 hours..
  • 3 MEASUREMENT MODES - This pull gauge can switch three measurement modes (Real-time/PEAK/AUTO-PEAK). In "PEAK" mode, it can hold the maximum force applied shown on the screen..
  • PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: I....
Check Stock