Reviews Terminal Housing

Cut by The Foot Wirenco 6/2 NM-B Non-Metallic Residential Indoor Cable with Ground

  • High-Quality Materials >>> The Helunsi junction box can easily be installed under the ground. Made of high quality plastic housing, it will not crack....
  • Waterproof >>> IP68 high waterproof level / Moisture-proof / Dust-proof / Anti-UV, 2 way plastic terminal, it can be installed horizontally and....
  • Specification >>> One in and one out and is delivered with a three-position terminal block. Terminal Block Current: 24A.
  • Easy To Install >>> The joint shell mold is integrally formed with a waterproof layer, the rotaters at each end close up the rubber around the ends of....
  • Wide Usability & After Sales >>> The Helunsi junction boxes are suitable for kinds of LED billboards, LED tunnel lights, LED Road landscape lighting,....
Check Stock

DOMETIC 2932520014 Light Assembly for 6/8 Cu Ft Refrigerators

  • Replacement light assembly for some 6/8 cu. Ft. Dometic refrigerators.
  • Includes two push rivets (0165521030), one clear cover (2932106012), one light housing (2932523018), two terminal contacts (2932108018), and one....
Check Stock

FIAMM 72102 Freeway Blaster HIGH Note Horn

  • FIAMM AM80SX HIGH note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector..
  • FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors.
  • Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications.
  • FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle.
  • FIAMM two terminal horn, 12 volt (Max amp draw 6) produces 130 decibels @ 4".
Check Stock

FIAMM 72112 Freeway Blaster LOW Note Horn

  • FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector..
  • FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors.
  • Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications.
  • FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle.
  • Fiamm two terminal horn, 12 volt (max amp draw 6) produces 133 decibels at 4 inch.
Check Stock

Original Engine Management 9305 Coolant Temperature Sensor

  • Temperature Switches are calibrated from -40C to 125C to match O.E. resistance characteristics ensuring proper fuel mixture and ignition timing under all climatic conditions..
  • Manufactured to meet expectations for fit, form, and function.
  • Brass terminals for excellent conductivity.
Check Stock

UK5-HESI DIN Rail Fuse Holder Disconnect Terminal Blocks Screw Clamp UK5RD (Without LED indicated, Grey, 10)

  • ✯ Category: Fuse Holder Terminal Block.
  • Type: UK5-HESI. Suitable for various sizes of fuse tubes, such as: 5x20, 5x25, 6x30, etc..
  • ✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Fuse terminal block for cartridge fuse inserts without indication. The lever-actuated fuse holder makes fuse insertion and extraction safe and easy..
  • ✯ Compact Fuse holder Terminal Block used in control circuit applications..
Check Stock

NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks  + 2Pcs Fixed Bridge Jumpers ＆ Aluminum Rail

  • 【UK-2.5N DIN Rail Terminal Blocks Kit】Comes with 20pcs UK-2.5N 12 AWG terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers and 1pcs 8" aluminum rail .
  • 【Terminal Blocks UK2.5B】Terminal Blocks UK2.5B is made of  nylon PA66 housing, alloy copper bodies and nickel-plated Screws. Rated voltage: 600V, IEC 690V. Rated current: 20A, IEC 32A.Flexible (AWG): 24-12. It can connect two conductors with ease and can be used on DIN Rail 35mm, steel or aluminum. .
  • 【8in Aluminum DIN Rail】Length : 203mm/ 8".
  •   Height : 7.5mm/ 0.3".   Thickness : 1.2mm/ 0.047".   Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances. .
  • 【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
  • 【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickl....
Check Stock

IWISS 1550PCS 2.54mm Pitch Wire-to-Wire Dupont Connector Kit, includes Pin Headers, Jumper Wire, Crimp Pins for RC Servo, Arduino, SMT, SATA, EPS, PCIE, Battery Balancer

  • 1550PCS Dupont Connector Kit includes a variety of connectors: single row pin headers, bent pin headers, crimp pin connector housings, male and female crimp pins for wires..
  • The housing components are injection molded Nylon66,UL 94V-0. These thermoplastics are scientifically proven to resist UV-radiation than the normal plastics, ensuring that the connectors are well-protected, reducing the chances of early degradation and increased cycles/minute of the connector subjected to harsh environments..
  • Dupont 2.54mm pitch wire-to-wire connector in a complete package including the male housing, female/receptacle housing, female terminal and male terminal, all manufactured with precision-fitting and durability ensuring accurate mating..
  • The electrical interfaces are fully sealed using a shrouded-header for use applications with high levels of moisture. The shroud helps meet the low smoke, toxicity and flammability requirements of almost all industries..
  • It offers a crimp style lock and a configuration which prevents users from inverted insertion. It is well-engineered to be air-tight, preventing oxygen and moisture from reaching the metals, causing corrosion..
Check Stock

Glarks 580Pcs 2.8mm Pitch 2 3 4 6 9 Pin Wire Connectors Housing Terminal Male & Female Plug Housing and Pin Header Crimp Wire Terminals Connector Assortment Kit for Motorcycle Bike Car Boats

  • 【1】Product Type: High quality male & female plug housing and pin header crimp wire terminals connector assortment kit.
  • 【2】High Grade Material: As you can see, these connectors color are white, they are made of high quality insulation plastic, with tin-plated copper pin plugs, durable and wear resistance than normal products.
  • 【3】Package: In this kit, there are 2.8mm 2 3 4 6 9 pin male and female plug housing total 100pcs with 480pcs pin headers, assorted placed in a transparent plastic box for easy manage and store.
  • 【4】Feature: Connectors are designed with fixed hook makes it very convenient for your installation, just put the crimps in the tool and press them, make the crimp the insulation are all the way toward the wire,2.8 mm terminal for cable diameter up to 2.0 mm.
  • 【5】Application: These wire connectors housing terminal has a widely application in daily life, it can be used to connect internal wiring, and it is also widely used on cars, quad bike, tricycle, caravan, motorcycles, scooters, boat, snowmobile.
Check Stock

Official Upgrade Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3 and 0.4mm Nozzle×3 for Creality Ender 3 V2 Ender 3 Ender 3 pro 3D Printer Not for Ender 5

  • 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work....
  • Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy..
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the....
  • With more terminal housing and pins as spare parts, in case fail installation and waste ..
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..
Check Stock