Reviews Tensioning Damper

YARDMARIS Winch Cable Damper,Winch Damper Safty Recovery Dampener with Reflective Strips for Off-Road Safty Blanket

• Great Tool for a Stuck Vehicle–If your SUV got stuck in a heavy snow,muddy road or rugged mountain road,you can rely on this winch damper to get out of sticky stituation..
• Reduce Risk of Injury–Should recovery strap breaks,it will snap back and strong energy will hurt you.Winch cable damper is recommended as it can reduce damage by weighing down the broken strap and absorbing the strong energy..
• Heavy Duty Fabric Helps Winch Line Damper Weigh 2.2 Pounds–It is a dependable winch rope damper because right side of fabric is dacron that helps the bag not bend easily.
• the wrong side of fabric is PVC that acts as a shock absorber.Together, fabric is firmer and heavier than other ones,which makes total weight of winch damper meet needs of 4×4 racing competition..
• Reflective Strip for Enhanced Visibility–14×1.5 inch reflective strips front and back make winch damper bag more obvious to other drivers to avoid accidents..
• Pocket For Storage & Weight Gain–A large pocket is designed to store accessories for emergency or put anything in the winch rope damper that can gain weight to increase safety..

Lucky Seven FL3Z-99406A10-A fit for Ford Tailgate Shock Assembly,FL3Z99406A10A for 2015-2019 Ford F-150

• FL3Z-99406A10-A fit for Ford Tailgate Shock Assembly,REPLACeS PART# FL3Z-99406A10-A, FL3Z99406A10A - This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
• FL3Z-99406A10-A/,fl3z-99406a10-a tailgate shock assembly,This tailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering.2015 2016 2017 2018 2019 Ford F150. The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body..
• Fl3z-99406a10-a oem for 2015 - 2019 Ford F150 including Raptor Models with years 2017 and 2019 |. Having a tailgate assist when opening is a nice thing. Although some of the Ford F-150s came with it as a factory option. Most did not. This kit installs seamlessly and hidden behind the tail lights,REPLACEMENT TAILGATE DAMPE....

Suncourt ZoneMaster Fully Adjustable Motorized Airflow Control Zone Damper, UL Listed 24VAC/20VA Plug-in Transformer Included, Compatible with Any 24 Volt Thermostat, Normally Open – 6', Silver

• ECONOMIC SOLUTION –Protect your comfort & your wallet by limiting heating and cooling expenses in your space. This cost-efficient zone damper limits the need for excessive HVAC use and keeps your heating and air conditioning costs low over time. With a 3-year manufacturer’s warranty, this zone damper is built tokeep you comfortable year after year..
• TOTAL ZONE CONTROL –This ZoneMaster gives you complete individual control over the climate in your space. Customize and maintain the temperature in specific rooms of your home with these zone dampers. Easily integrate it with an existing zone controller system!.
• FRESH AIR INTAKE – Improve the quality of air in your home by installing a fresh air intake system with a Suncourt motorized airflow damper. Once damper is closed, it will block drafts, airflow and odors from flowing through. Suncourt’s dampers boast a patent-pending coupler with 0°- 90°adjustment capabilities, making them perfect for fresh air intake applications..
• ENERGY EFFICIENT DESIGN – Take control of your comfort and preserve energy by using these automated duct dampers. When power is not supplied, the damper stays open allowing for air to flow through..
• UL LISTED 24 VAC TRANSFORMER INCLUDED - Simple and user-friendly, this damper....

Tailgate Damper Kit - Compatible with Ford F-150 2015, 2016, 2017, 2018, 2019, F-150 Raptor 2017-2019 - Replaces FL3Z-99406A10-A, FL3Z99406A10A - Tail gate Assist Shock Strut - Lift Support Kit

• Replacement Tailgate Damper Kit - This is a replacement for the tailgate damper accessory kit. The tail gate even being made of aluminum is really heavy especially when installed with more accessories like the tailgate step resulting to the tailgate dropping right out of the hands when opening. This kit safely lowers the tailgate in a slow and controlled manner..
• Compatible Replacement for Ford F150 - 2015 - 2019 F150 including Raptor Models with years 2017 and 2019 |. Having a tailgate assist when opening is a nice thing. Although some of the F-150s came with it as a factory option. Most did not. This kit installs seamlessly and hidden behind the tail lights..
• Replaces Part# FL3Z-99406A10-A, FL3Z99406A10A - This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
• OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory tailgate damper kit. Ensure that the tailgate harness under the t....

Duct Outlet 6\ Damper Sleeve w/ 1.5\ Stand-Off, 3/8\ Rod HVAC

• 6" Damper Sleeve w/ 1.5" Stand-Off, 3/8" Rod HVAC.
• 1½” Stand-Off for the locking Damper Handle.
• 20 Gauge Galvanized Damper Blade with 3/8" Rod.
• Crimped on one end to fit inside next ducting section.

Assault Racing Products 8000170 7.5\ LT-1 Chevy Harmonic Damper LT1

• Self-adhesive strip adheres to the Crank Vibration Damper.
• Spark advance up to 60 Degree instead of only 10 Degree-15 Degree as on chain case timing tab.
• Genuine Mopar Performance P4529070AB Damper Degree Timing Tape.

Tamiya 86012 Paint Spray, Silver

Innovala PI164-GR25, 25PACK Pin Damper Soft Close Cabinet Door, 25 Pack, Aluminized ABS

• Mounts easily with only one screw into the cabinet corner on the hinge side.
• Only one unit needed for most applications. Surpass kcma requirements.
• Screw and mounting instructions included.
• No pilot hole drilling necessary. Comes with self-tapping screw.
• Note: Mount the damper on the side of the door where the hinge is mountedDescriptionOur product Innovala is a German manufactured soft closing damper for kitchen & bath cabinet doors. Innovalas damper program is an innovative product that has been sold to the us cabinet and retail industry since 2008. We have sold millions and have been copied many times. We are the exclusive wholesale and retail distributor for the north American market. Its very simple to install our Innovala soft close dampers. First you need to make sure that your cabinet hinges are self-closing. In order to find this out, just open your cabinet door a couple of inches and let it go. If your door closes it has self-closing hinges, if it does not close and stays open your cabinet hinges are not self-closing and not one soft close damper in the market will work. Now you need to find the right location to install the damper. Always use the top corner closest to the hinge. Our instal....

TFL3Z-99406A10-A ailgate Assist,Tailgate Damper Shock Assembly Kit ,Fits for Ford F-150 2015, 2016, 2017, 2018, 2019,Tailgate Assist Shock Strut,Lift Support Kit,Replaces# FL3Z99406A10A

• ...ailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering. No more slamming down tailgate,The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body.This kit safely lowers the tailgate in a slow and controlled manner..
• ★ High Quality: Normal wear and tear from use is already an issue with tailgate damper kit, but bumpy roads and potholes can also grate on the alignment of your trucks gate as well. Made from high-quality and extensively tested stainless steel, this damper will not just protect your limbs from damage but will also save the integrity of your tailgate..
• ★ This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
• ★ 100% Satisfactory service, if you have any questions, please feel free....

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

• 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
• 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
• 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
• 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
• 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....