Reviews Temperature Sensor Flex Wire

AITRIP 5Pack 2pcs DS18B20 Temperature Sensor Module Kit with Waterproof Stainless Steel Probe for Raspberry Pi

  • Temperature sensor supply voltage: 3.0V ~ 5.5V.
  • The temperature sensor supports the "one-wire bus" interface (1-Wrie), the measurement temperature range is -55 °C ~ +125 °C, in the range of -10 °C ~ +85 °C, the accuracy is plus or minus 0.5 °C.
  • Output : red (VCC), yellow (DATA), black (GND).
  • DS18B20 temperature sensor: the size of stainless steel housing is approx. 6 x 50 mm/ 0.2 x 2 inch, and the digital temperature thermal cable has a total length of approx 1 m/ 39.4 inch, which is long enough to meet your needs..
  • AITRIP DS18B20 temperature sensor is compatible with Raspberry Pi, and is widely applied in temperature monitoring of cable trench, boiler, zer, agricultural greenhouse, clean room, etc..
Check Stock

MoesGo Programmable WiFi Smart Thermostat for Home, No C-Wire Required by C-Wire Adapter, with Zone Remote Sensor, Remote Control Tuya/Smart Life, Compatible with Alexa and Google Assistant, 24VAC

  • 【Wide compatibility with C-wire adapter/Not supported 2 wire】Suitable for Conventional (2H/2C).
  • Not support heating only systems(No C-wire)/high voltage systems(120V-240V).
  • 【Saving energy】Saving over 23% energy and create a comfortable environment..
  • 【Free Temperature Sensor】Free temperature sensor, for your better experience..
  • 【Time Schedule】7 days programmable, 4 modes available, set schedules automatically change temperature to suit your life and work..
  • 【Remote Control】Control your temperature control whenever and wherever you want, so your home is always the right temperature..
Check Stock

Replacement Temperature Sensor for The Char-Griller Gravity Fed 980 Charcoal Grill, Temperature Resistance Up to 1112°F, Imported Pt1000 Resistor

  • Upgraded models: the original temperature sensor gives an error code at 842 degrees Fahrenheit and is damaged. The new temperature probe can be used up to 1112 degrees Fahrenheit and transmits temperature.
  • Temperature sensor for char-griller 9800/9804 gravity fed grill.
  • Imported resistance: PT1000 as the main detector for more accurate temperature detection in high temperature environments..
  • High temperature resistant braided wire: Braided wire made from high quality high temperature resistant stainless metal that can be used at 1000 degrees Fahrenheit and will not melt.
  • After-sales warranty：We will perform quality inspection at the factory to ensure you receive the kit in perfect condition, your satisfaction is our motivation. If you need technical help please contact us via Amazon mail, we will reply within 24 hours.
Check Stock

Temperature Sensor, PT100 Type Digital Temp Transducer Thermal Probe Sensor Waterproof with Cable for Arduino Raspberry Pi(50MM)

  • ☀ 【Wide Temperature】 This temperature sensor is PT100 type stainless steel waterproof thermocouple, and it can withstand wide temperature range of -200 ~ 450 ℃..
  • 【Characteristics】 It has the feature of high precision, high sensitivity, high temperature resistance, quick response, good shockproof effect..
  • ☀ 【Parameters】 Lead length: 1.5m / 59.1in.
  • Protecting tube diameter: standard 7 mm..
  • ☀ 【Excellent Sealing】 The temperature sensor with great processing treatment, argon arc welding seal, excellent sealing effect..
  • ☀ 【Durability】 The temperature thermocouple sensor probe adopted of high quality three-core high temperature shield wire, secure and durable..
Check Stock

Knock Sensor Wire Harness Kit Replaces 12601822 917-033 - Fits Chevy Suburban Chevrolet Silverado Avalanche Tahoe GMC Sierra Yukon Hummer 4.8 5.3 6.0 2000-2007

  • 【High Quality】A ABIGAIL knock sensor wiring harness is made of durable, high temperature wire which will avoid melting, chaffing, and breaking.....
  • 【Function】Replace the factory knock sensor harness kit which connects to the knock sensors on your engine and receives signals from both sensors.....
  • 【Interchange Part Numbers】This Knock Sensor Wire Harness Kit is compatible with 2601822, 12589867, 81045-66030, 10456603, 213-3521, 917-033.It....
  • 【Application】This Knock Sensor Wire Harness Kit fits for Buick Rainier, Cadillac Escalade, Chevy Avalanche  Express Silverado Suburban....
  • 【Service】100% satisfaction guarantee, If you have any issues with the Knock Sensor Harness, simply contact customer service for troubleshooting....
Check Stock

Industrial Temperature Monitoring Meter, PEMENOL High and Low Temperature Dual Digital LED Display Thermocouple Thermometer with 0.5M K-Type Thermocouple Sensor Probe M6 for HVAC System

  • ★Wide Power Supply Range: DC 4V~28V The red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply. Sensor wire should not be connected incorrectly !! NOTE: This product is more suitable for measuring high temperatures..
  • ★High and Low Temperature Dual Display: The industrial monitoring thermometer with 2 temperature measurement ranges. Internal temperature measurement range: -58F~257F.
  • External temperature measurement range: -76F~999F. Minimum resolution 0.1F, accuracy 1F.
  • ★Red + Blue 3Bit Digital LED Display: The Fahrenheit Thermometer shows degrees Fahrenheit, Non-reflective, clear display, the value can be clearly seen at any angle. Can quickly let you know if your home appliances are working properly. Such as kitchen oven, home brewing equipment, refrigerator, and freezer.
  • ★With Temperature Compensation Function: Effectively avoids the influence of ambient temperature on the sensor, and the temperature measurement is more accurate. Please read the user manual for more details..
  • ★Wide Application: The K-type Thermocouple High Temperature Tester can be used to industrial temperature measurement, can be embedded in an instrument to measure certain  specific tempera....
Check Stock

Adafruit Power Management IC Development Tools Precision LM4040 Voltage Reference Breakout - 2.048V and 4.096V 1 Piece

  • DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor..
  • It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and....
  • Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller....
  • The product has excellent quality, fast response, anti-interference ability, high cost and other advantages..
  • The single-wire wiring scheme makes it easy to be integrated to other applications.And the simple communication protocol greatly reduces the....
Check Stock

DORHEA 2Pcs BME280 5V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-5V IIC I2C Breakout Board

  • The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity..
  • BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz).
  • Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI..
  • The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..
  • The BME280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy..
Check Stock

MARS CAMP Replacement for Pit boss RTD Temperature Probe Sensor Compatible with Pit Boss P7 Series Wood Pellet Grills BBQ PB-39P350

  • 【Compatible】RTD Temperature Probe Sensor Grill Replacement Parts. Compatible with Pit Boss P7 Series(P7-3.5/4.5/5.5/7.0) and Pellet Smokers..
  • 【Temperature Probe Parameters】Temperature Probe Sensor: 3/16" (3cm) Internal Grill Sensor, 14" (35cm) Stainless Steel Wire Lead, c/w SM female....
  • 【Features】The RTD meat barbecue temperature sensor probe can read the internal temperature of the barbecue and send the signal back to the....
  • 【Professional & high quality】From the world's top supplier. The probe uses precision German platinum resistance PT1000. Strict quality control....
  • 【Service】We will strictly inspect the products when they are shipped. If there is any problem, Don's hesitated to contact us by "Amazon message"..
Check Stock

Waterproof K Type Thermocouple - Jaybva Temperature Sensor Probe for PID Temperature Controller Two Wire Stainless Steel NPT3/4" BSPT 1/2" inch Pipe Thread 0~500℃ with 2m Shield Wire

  • The K type sensor probe can work well with PID temperaure controller.
  • Water proof Insulation Lead , water tight temperature sensor probe , rustproof with stainless steel material.
  • Cable: 78.7 inch ( 2m ) metal braided line , wire can withstand 500℃ high temperature . It is compesation wire with shield feature.
Check Stock